You are browsing camaro5 
 |
|
11-22-2017, 08:06 AM
|
#15 |
    
Drives: 2010 CAMARO SS Join Date: Apr 2010
Location: ohio
Posts: 1,360
|
all airbags still work
|
|
|
|
11-28-2017, 02:04 PM
|
#16 |
 
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Bump?
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
|
|
|
|
11-28-2017, 03:15 PM
|
#17 |
|
Drives: 2010 CAMARO SS Join Date: Apr 2010
Location: ohio
Posts: 1,360
|
|
|
|
|
|
03-26-2020, 05:44 PM
|
#18 |
 Drives: 2014 Chevy Camaro ZLS Join Date: Jul 2019
Location: San Diego, California.
Posts: 2
|
Has anyone figured out how to trick the system? Don’t want to get seats and have a stupid light on the dash
|
|
|
|
|
03-26-2020, 10:20 PM
|
#19 | |
|
GrINned & JUICEd
Drives: 15STI, 10Expy, 10 2SS/RS M6, 47KB1 Join Date: Nov 2009
Location: Pittsburgh, PA
Posts: 1,247
|
Quote:
__________________
GPI SS3 Cam & stuff,N.O. Plate(dedicated fuel tank,progressive,fuel hose upgrade,remote opener,heater,console switches),LNC2000,CTAP,ARH 1 7/8" LTs/gutted cats/X pipe/mufflers,Jet Hot coated LTs,GPI HPT Tune,CAI, Scoop,Rx Catch Can,Gates heater hose relocation, Remote clutch & auto brake res,Metco loop,Momentum Tunnel Brace,TSW Nurb 18",555 & 05,Pfadt trailing arms & toe rods,Autometer WB,Fesler Pillar Pod,LED strips (int),Lloyds floor & trunk mats,LED DRL/front turn & license plate,DRL harness,VLEDs tail lights,Plasticoat Bowties. Ord: Oct 5, 2009 Rec: Nov 19, 2009 13.17@112.6 stock
|
|
|
|
|
|
03-26-2020, 10:52 PM
|
#20 | |
     
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,570
|
Quote:
If going aftermarket, you will have to do the resistor mod. There are a few threads around about it from people that swapped to racing seats.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
|
|
|
|
|
03-27-2020, 02:27 AM
|
#21 |
|
Account Suspended
|
Get a multi-meter, put it on OHMS, measure the resistance of the seat air-bags at
the harnesses, buy resisters for those values. |
|
|
|
|
03-27-2020, 07:17 AM
|
#22 |
|
Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,143
|
I think there was a post within the past few months saying this company could help.
http://airbagsystems.com/simulator.html |
|
|
|
|
08-21-2020, 07:27 AM
|
#23 |
|
NEcamaro5
|
Just got these in. The first part to my seat swap. Now I wait till my new seats come in. |
|
|
|
|
08-21-2020, 09:43 AM
|
#24 |
 
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,018
|
Awesome thanx for the info
|
|
|
|
|
08-21-2020, 05:24 PM
|
#25 |
 
Drives: 2011 2SS, 2006 GMC Sierra Join Date: Jul 2019
Location: MA
Posts: 239
|
I put the autel scanner on my car and went into the sensing and diagnostics module live data to see the drivers and passengers deployment loop resistance for the seat side airbags and the resistance for both is 2.5 Ohm. There's also the seat position sensor too that would need to be dealt with.
It looks like spec is between 1.7-4.2 Ohms |
|
|
|
|
08-21-2020, 06:41 PM
|
#26 |
|
Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012
Location: Vance Alabama
Posts: 8,018
|
Of all of the airbags I've seen loop out at 2.5ish ohms
|
|
|
|
|
10-07-2020, 08:30 PM
|
#27 |
|
NEcamaro5
|
Why the sideways view. What the hell. Seats came in last week. Brackets came in also. My install should be the next few weeks and I’m nervous about the slider sensor and passenger side pressure sensor. I really don’t want to take my passenger seat completely apart for the sensor pad. But I will do what needs to be done wish me luck. |
|
|
|
|
10-07-2020, 08:55 PM
|
#28 |
|
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Resistor to turn off airbag light from installing Racing seats
I should have posted on this thread months ago, but I finally found someone selling resistors for the 5th gen Camaro from the 5th generation Camaro Facebook page. He puts it all together and then ships it to you. No more airbag light or service airbag notification
 His IG is @justaniass for those who are interested ***EDIT**** he changed his Instagram username to @ssendit_daylee. For those people messaging about it and future people here ya go  * 
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez Last edited by krisprz2010camaross; 04-14-2021 at 12:33 PM. |
|
|
|
|
|
|
|
 |
|
|
