01-24-2019, 09:34 AM | #2353 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-24-2019, 09:57 AM | #2354 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-24-2019, 12:20 PM | #2355 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
So, wanted to be sure I could get the boneyard's paint off. A little 70% Denatured Alcohol, cotton balls (Jumbo) and off it came -- took about 5 minutes to get the little I needed off:
Final wipe down and next the stripes removal... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-24-2019, 04:54 PM | #2356 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
Pedders Cont.
Rears are done!
After adding some clearance to the lower coilover cap, everything lined up! I did have to keep the strut tower cap 'loose' so I could ease the coilover into the Detroit Speed LCA but, everything line up, used a jack to push things together and got everything 'guten tite' ;o) New Swaybar links front and rear -- now we're talk'n! Rear coilovers set to 14 from soft... Tested setting them from 'under' the car to make sure I could do it... Next item is the bit of front end work I had left then 'alignment'! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 01-24-2019 at 07:41 PM. |
01-24-2019, 05:27 PM | #2357 |
ZL1 Pilot
|
Looks great!
__________________
GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs |
01-24-2019, 05:57 PM | #2358 |
Instagram: Sangstah
|
hot damn those detroit speed lcas look amazing!
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
01-24-2019, 06:00 PM | #2359 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
I like how much camber adjustment they have.. very nice for sure...
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-24-2019, 07:03 PM | #2360 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
ZL1 Addons Strap Points
Got around to these finally, rears -- no problem:
Fronts -- drivers side: Passangers -- and -- what? Yep... Rack bolts take up all of it... So, looks like I have an extra front for now.... Have to see if I can find bolts for the rack that are shorter -- maybe a 2013 will do (Electric Rack) Figures... Draining the radiator hose so I have a bit of cleaning to do still... yuck... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-25-2019, 07:56 PM | #2361 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
ZL1 Addons Strap Points (cont.)
Problem solved. Got a M12 1.75 x 60 MM with a washer, did some blue locktite -- done!
next some cleanup and validate/adjust the ride height -- then alignment. I'll do the caster plates and motor mounts later since I have a race coming up on the 23rd of Feb and I need to do some track prep for that... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-30-2019, 05:17 PM | #2362 |
Drives: ZL1 Join Date: Mar 2018
Location: Here and there
Posts: 183
|
Hey Don,
I see that you upgraded to the new MPVI 2 and the Prolink. Did you also have to upgrade to the Pro feature in order to log the wideband sensors? I currently have the MPVI standard and would like to upgrade to the MPVI 2 along with being able to log the wideband. |
01-30-2019, 05:48 PM | #2363 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
I had the pro to begin with so it was a free upgrade but essentially I had to have the pro. Now the AEM wideband is bus driven so it reports itself vs the input connector that comes with pro. In that case, you may not need pro. I'd verify with AEM if you go that route...
-Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-30-2019, 06:20 PM | #2364 | |
Drives: ZL1 Join Date: Mar 2018
Location: Here and there
Posts: 183
|
Quote:
I do have an Aerofoce Interceptor gauge with the wideband. Can I use that? will a pass though cable with an additional OBD end allow me to log and use the gauge at the same time or can I only use one or the other? Thank you |
|
01-30-2019, 06:39 PM | #2365 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
AeroForce wb probably needs the pro. AEM connects inline with the obd2 port (self powered) and reports like the ECM does. I believe the AeroForce is not like that and you need to connect it directly with the pro connector.
I chose the AEM for just this reason: it will work inline with the HP Pro Obd2 connector. -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
01-30-2019, 09:02 PM | #2366 | |
Drives: ZL1 Join Date: Mar 2018
Location: Here and there
Posts: 183
|
Quote:
|
|
|
|
|
|