tr6060 input shaft issue - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fz4k98 · 10-23-2023, 05:51 PM

I am looking at having to replace the input shaft bearing on my trans. I'm able to see videos of trans rebuilds but have not found anything on just replacing the input shaft and bearing.

I am guessing I can take off the front cover and go in from there?

Anyone done this and if so have any details?

CamaroCracka · 11-23-2023, 04:13 PM

Never done it but maybe this thread from the Corvette Forum will help you out.

https://www.corvetteforum.com/forums...d-rebuild.html

10-23-2023, 05:51 PM	#1
fz4k98 Drives: 2013 1ss Join Date: Jul 2012 Location: WI. Posts: 520	tr6060 input shaft issue I am looking at having to replace the input shaft bearing on my trans. I'm able to see videos of trans rebuilds but have not found anything on just replacing the input shaft and bearing. I am guessing I can take off the front cover and go in from there? Anyone done this and if so have any details?

11-23-2023, 04:13 PM	#2
CamaroCracka Drives: 2010 Turbo LS3 Join Date: Dec 2009 Location: Palm Bay, FL Posts: 2,736	Never done it but maybe this thread from the Corvette Forum will help you out. https://www.corvetteforum.com/forums...d-rebuild.html __________________ 2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes. 2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.