08-22-2014, 11:27 AM | #43 |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
Not sure i like it much in red
So I'm making another black one |
08-22-2014, 05:00 PM | #44 |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
Went and did a test fit over the OEM bow tie, think it will be best to use it as a complete replacement instead. For a second i thought i could just put to over the factory one, but i'd rather have a complete replacement, so ima finish up complete replacement tonight
|
08-22-2014, 06:38 PM | #45 |
Drives: 2013 camaro Join Date: Mar 2013
Location: Colorado
Posts: 607
|
Can you make a write up of the process? Products and materials used, and the sanding and applying the clear. I would like to try this.
|
08-22-2014, 07:03 PM | #46 |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
|
08-22-2014, 07:35 PM | #47 |
Drives: 2013 camaro Join Date: Mar 2013
Location: Colorado
Posts: 607
|
Great man!!!!! Your stuff looks killer!!! How much for the fiber, is it expensive?
|
08-22-2014, 07:48 PM | #48 |
|
That looks badass.
Its always cool when someone does something like this themselves ! Props. |
08-22-2014, 08:12 PM | #49 |
Drives: 2013 Camaro 2SS/RS Join Date: Jul 2014
Location: Maryland
Posts: 37
|
|
08-22-2014, 08:13 PM | #50 |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
The CF itself is cheap compared to the fake stuff like 3m di noc. The part that make CF expensive is not the materials, but the time that has to invested into making the parts. I made a CF replacement for one dash piece...took too much time and for bigger pieces, would mean using to much CF. So ima just laminate my parts going forward or reinforce them with fiberglass instead.
|
08-22-2014, 08:50 PM | #51 | |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
Quote:
Yeah there are quite a few option out there, depends what you will be using them for. interior exterior, will you be using clear coat to help with UV, or is it UV resistance... |
|
08-23-2014, 03:30 AM | #52 |
Drives: Black 2ss Join Date: Jul 2011
Location: Amarillo, tx
Posts: 272
|
stuff looks amazing.. wish I had the patience lol.> But you could make some bank doing this...
|
08-23-2014, 05:29 PM | #53 |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
brought the other bow tie with me to work, sanding it down and getting it ready for trimming. Hope to have it done later tonight
|
08-24-2014, 08:43 AM | #54 |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
Sanded down:
Mock fit: Just need to clear coat and polish it up. |
08-25-2014, 11:39 PM | #55 |
Drives: Solstice GXP Join Date: Jul 2014
Location: DFW
Posts: 175
|
This bow tie came out SWEET!!!! Will post pics tomorrow when i attach it to the bezel
|
08-25-2014, 11:50 PM | #56 |
SHKE BKE
Drives: 2013 Camaro Join Date: May 2014
Location: SoCal
Posts: 3,108
|
Can you make CF tail light bezels? By that I mean are you willing
PM me if you'd be interested. I'd be willing to send you my stock chrome bezels to work with |
|
|
|
|