Factory reproduction ZL1 wheels - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KMPrenger · 02-08-2014, 02:09 PM

I have the 20x9s all around, and they stick out much further than factory, and I love the look. That said, they are not punched out as far as possible.

If you were to do the 20x10s all around (I think its 23mm offset for the front and 35mm for the back) they would stick out just a hair more, but its a small difference...I've compared the two.

KMPrenger · 02-08-2014, 02:11 PM

Here is a shot from when I first installed them and lowered the car about an inch or so. Springs were just installed and it hadn't settled at all yet.

and here is the latest, but your drop is still more than mine is:

TJohnston · 02-08-2014, 11:35 PM

Quote:

Originally Posted by KMPrenger

Here is a shot from when I first installed them and lowered the car about an inch or so. Springs were just installed and it hadn't settled at all yet.

and here is the latest, but your drop is still more than mine is:

That looks really good with 20x9s all around. Much better than that factory "tucked in" look.

Side note, my in-laws live in Linn.

KMPrenger · 02-09-2014, 09:16 PM

Quote:

Originally Posted by TJohnston

That looks really good with 20x9s all around. Much better than that factory "tucked in" look.

Side note, my in-laws live in Linn.

Thanks!

I'm in Linn fairly often. Bought my car at Carroll Rehma there. My parents live just a few miles east of Linn, so I'm through there all the time, and I have family and friends there as well.

Small world.

Kleeeb · 02-09-2014, 11:54 PM

Quote:

Originally Posted by bionick

20x10 satin black. Nitto Motivo 275/40/20 all around

Okay, this is off topic, but is your camaro SW, SIM, or custom? It looks almost like a pearl white color in those pictures, and I love it! Another question I have... If I were to get these wheels, what size would fit my stock pirellis?

BLK MARO · 02-10-2014, 03:14 PM

Quote:

Originally Posted by Kleeeb

Okay, this is off topic, but is your camaro SW, SIM, or custom? It looks almost like a pearl white color in those pictures, and I love it! Another question I have... If I were to get these wheels, what size would fit my stock pirellis?

20x9 front and 20x10 rear will fit stock pirellis

Scott@Bjorn3D · 02-10-2014, 04:42 PM

20x10 all the way around with +23 offset.

Hooper · 10-10-2017, 03:11 PM

Quote:

Originally Posted by BLK MARO

Here's my current setup. I have 25mm spacers on the car right now. I just hope the new wheels are close to this.

Attachment 598153

Attachment 598154

Very nice. Do you have any side pics of the rears with the 25mm spacers? If so can you post them?
Thanks!

Hooper · 10-10-2017, 03:14 PM

Quote:

Originally Posted by BLK MARO

I just ordered the factory repos yesterday. I got 20X9 27mm offset in front and 20X10 35mm offset in rear. I was wondering if anybody with this setup has pics of it. I want to see if the wheels are out to the fenders not tucked in. thanks

Sorry to be off topic, what deck spoiler do you have? I'm referring to the spoiler in the signature pic of your car.

SS PANTHER · 10-14-2017, 07:24 AM

I run a 20x10 +23et all around on 285-35-20's. Handling is a tremendous improvement with most of the under steer eliminated, I can rotate front to rear, the deeper concavity looks better and runs flush with the fenders. I am down 1" and have no rubbing and I track the car. I had run 275-40-20's at first down 1" and it was fine but I did rub up front and scored the outside on the track.

02-08-2014, 02:09 PM	#15
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	I have the 20x9s all around, and they stick out much further than factory, and I love the look. That said, they are not punched out as far as possible. If you were to do the 20x10s all around (I think its 23mm offset for the front and 35mm for the back) they would stick out just a hair more, but its a small difference...I've compared the two. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

02-08-2014, 02:11 PM	#16
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	Here is a shot from when I first installed them and lowered the car about an inch or so. Springs were just installed and it hadn't settled at all yet. and here is the latest, but your drop is still more than mine is: __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

02-10-2014, 04:42 PM	#21
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 6,427	20x10 all the way around with +23 offset. Attached Images

10-14-2017, 07:24 AM	#24
SS PANTHER Drives: 2013 SS Supercharged Convertible Join Date: May 2013 Location: SoCal Posts: 2,714	I run a 20x10 +23et all around on 285-35-20's. Handling is a tremendous improvement with most of the under steer eliminated, I can rotate front to rear, the deeper concavity looks better and runs flush with the fenders. I am down 1" and have no rubbing and I track the car. I had run 275-40-20's at first down 1" and it was fine but I did rub up front and scored the outside on the track. Attached Images