08-16-2014, 03:32 PM | #1 |
Removing dealer Decal help
So I decided to remove the dealer Decal today. I removed the "Chevrolet" but then saw that you could still see where it was. Before I remove the rest of the decal is their anyway to get rid of this (pic below):
Note: it's hard to see in the picture but can be seen when light reflects off of it |
|
08-16-2014, 05:53 PM | #2 |
Drives: early 2011 Camaro convertible Join Date: Jul 2014
Location: House Springs, Mo
Posts: 2,002
|
try buffing with rubbing compound and then follow up with polishing compound. Do it by hand to keep from burning the paint.
__________________
Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust |
08-16-2014, 07:26 PM | #3 |
Account Suspended
Drives: 2011 Camaro 3.6L V6 Join Date: Jul 2014
Location: Tifton, GA
Posts: 73
|
yep... looks like the paint is in better shape under where the stickers were... in other words, no fine scratches... hopefully you can polish the scratches around it out and make it less obvious...
|
08-16-2014, 09:46 PM | #4 |
Drives: 2014 Camaro 1LT/RS Join Date: Sep 2013
Location: Arizona
Posts: 1,693
|
Had similar issue recently.
IPA wipe down and polish. And disregard whoever said something about burning paint, unless you are using a rotary polisher.
__________________
Detailing is an involuntary obsession.
|
08-17-2014, 09:32 AM | #5 |
|
|
|
|