You are browsing camaro5 
 |
|
05-07-2013, 02:56 PM
|
#1 |
|
Chiquita
Drives: 2013 1LE/1SS YELLO1LE 1 of Only 28 Join Date: Nov 2011
Location: Mpls. Mn./Hudson,Wi.
Posts: 4,740
|
Can't brakeum lose ???
I have 2012 Convertible with a K&N Cai And 20" SS wheels and tires and I can't for the life of me brake the tires lose? Even with the Nannies turned off! Any Ideas
    TO MUCH TIRE FOR TO LITTLE pOWER??????
|
|
|
|
05-07-2013, 03:42 PM
|
#2 |
            
Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 13,943
|
Not sure. You should be able to spin em relatively easy in my opinion. Maybe its the Torque management.
Try this: Turn off all the nannies as you have done....put the car in manual mode/1st gear (if you are an auto). Take off at a very slow speed (so the transmission is engaged). Stomp on it. Yes I know this isn't like spining the tires from a dig, but its just a test. I can do it either way....and even rolling in first I'm pretty sure I can break em loose at around 10 - 15 mph or so just be stabbing the throttle.
__________________
2016 Camaro 1SS - 8-speed - NPP - Black bowties
2010 Camaro 1LT V6 (Sold. I will miss her!) |
|
|
|
|
05-07-2013, 03:58 PM
|
#3 | |
|
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
KM is correct. Should not be a problem.
If that wont do it, try this: 
|
|
|
|
|
|
05-07-2013, 06:55 PM
|
#4 |
|
Guest
Drives: bbbbbb Join Date: Dec 2012
Location: bfe
Posts: 713
|
Mine has auto trans and with the upgrades I threw in it, it still won't break the tires loose on bare tar. But if I start from where there is a little sand it will get them turning but it is short lived. It digs in and goes.
Dean. 
|
|
|
|
|
05-07-2013, 07:00 PM
|
#5 | ||
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
Quote:
|
||
|
|
|
|
05-07-2013, 08:06 PM
|
#6 |
|
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
or wait until it rains........lol j/k
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
|
|
|
|
05-07-2013, 08:11 PM
|
#7 |
|
GAHDOOSH
Drives: 2016 Camaro 1SS Join Date: Apr 2013
Location: Greenville, South Carolina
Posts: 502
|
I've got the 2013 V6 stock in manual and I dont seem to have any trouble getting the tires lose or the back end for that matter...
Make sure you hold that traction control button down until the stability control pops off as well. |
|
|
|
|
05-07-2013, 09:30 PM
|
#8 | |
|
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Quote:
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
 Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
|
|
|
|
|
05-07-2013, 09:59 PM
|
#9 | |
|
GAHDOOSH
Drives: 2016 Camaro 1SS Join Date: Apr 2013
Location: Greenville, South Carolina
Posts: 502
|
Quote:
I find it hard to believe that with trac control and stability assist off you can't just put the break down a tab and the gas to the floor and watch em smoke... Someone check me on that but my tundra (5.7L V8 auto) does it with ease... |
|
|
|
|
|
05-07-2013, 10:01 PM
|
#10 |
 
Drives: 2012 LFX Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
|
its a good thing ur tires don't break loose that way when you take off. u just launch. but hey what do I know
|
|
|
|
|
05-08-2013, 07:57 AM
|
#11 |
Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,110
|
Sticks have no issue, but us Auto guys do...Even with all my mods its a rare deal. However after this week i dont think it will be a problem as 3.73 gears are going in.
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
|
|
|
|
05-08-2013, 09:14 AM
|
#12 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
We have a product that will help with your problem. Let us know if you have any questions.
|
|
|
|
|
05-08-2013, 09:23 AM
|
#13 |
Drives: 11 F150 EB/13 Sonic RS/15 Z06 Join Date: Sep 2010
Location: Little Rock, AR
Posts: 7,129
|
Let me have it for a while, I'm good at breaking stuff.
__________________
New Ride -- 2015 Z06 2LZ (stock) -- Journal
Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread |
|
|
|
|
05-08-2013, 04:49 PM
|
#14 |
|
Guest
Drives: bbbbbb Join Date: Dec 2012
Location: bfe
Posts: 713
|
Myself, I have never tried a power/brake burnout yet. It just would look cool because the autos doesn't come with limited slip. Water isn't a problem to get them going. Even more fun in snow/ice when the nannies are off.
Dean. 
|
|
|
|
|
|
|
|
 |
|
|
