06-04-2020, 02:15 PM | #1 |
Drives: 2011 Camaro 2SS L99 Join Date: Apr 2019
Location: Lehigh Acres , FL
Posts: 39
|
Code p0443
Got DTC p0443 malfunction in purge valve or control circuit. I’ve replaced the purge valve and that didn’t solve the problem I’m guessing it’s a wiring issue. Can anyone point me in the right direction thank you.
|
06-04-2020, 11:34 PM | #2 |
Account Suspended
|
Then all you got is circuit (plug, wire), or the control circuit in the ECU.
|
06-06-2020, 09:42 AM | #3 |
Drives: 2011 Camaro 2SS L99 Join Date: Apr 2019
Location: Lehigh Acres , FL
Posts: 39
|
Checked fuse 32 for the purge valve and it looks fine gonna test the connector next
|
06-26-2020, 11:22 AM | #4 |
Drives: 2011 Camaro 2SS L99 Join Date: Apr 2019
Location: Lehigh Acres , FL
Posts: 39
|
So I think the connector was bad however I went ahead and just got rid of it. Put a filter on the hardline and capped off the intake. Also got the codes turned turned off so no CEL. Haven’t had any issues
|
06-26-2020, 01:19 PM | #5 |
Drives: 2010 SS L99 Join Date: Sep 2018
Location: Missouri
Posts: 1,634
|
Next time posting your question in the proper sub-forum will usually get you an answer quicker. This is the Member Car Journals section. Just a heads up. Good luck
__________________
Previous PB:11.079 @ 122.99mph.. New setup time: TBD
The 11.079 pass: https://youtu.be/pz27Zq54t_E Build thread - www.camaro5.com/forums/showthread.php?t=555371 |
|
|
|
|