03-04-2011, 11:33 AM | #1 |
Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,706
|
10sec N/A cars?
At first I was think blower but I am leaning towards staying NA for a few reasons. Is there anyone out there that has hit 10s without going with a stroker? I cant find any...I was thinking full bolt-ons GX6 cam, fully ported heads, intake, throttle body ect. with suspension upgrades.
__________________
10.91 at 122 H/C stock block N/A
|
03-04-2011, 11:34 AM | #2 |
BAMF SS
|
not yet
n/a stock short block record is 11.2
__________________
2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance
Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph. |
03-04-2011, 12:10 PM | #3 |
Account Suspended
Drives: 07 Dodge Charger SRT8 Join Date: Sep 2009
Location: In Space
Posts: 614
|
How many strokers are in the 10's NA?? Just curious...
|
03-04-2011, 12:48 PM | #4 |
Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,706
|
11.2 huh...thats pretty close, do you know his setup?
__________________
10.91 at 122 H/C stock block N/A
|
03-04-2011, 01:08 PM | #5 |
BAMF SS
|
stock heads, g6x3, full bolt ons, ccw skinnies, 18" z06 wheels with m/t drag radials, extremely good air
__________________
2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance
Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph. |
03-04-2011, 01:50 PM | #6 |
Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,706
|
So heads, ported intake, and throttle body would most likely do then! Some trans upgrades, axles, welds and some suspension work would make for a killer NA car! High 10s would be my goal, maybe throw a 200 shot on it too after I get used to it
__________________
10.91 at 122 H/C stock block N/A
|
03-04-2011, 02:09 PM | #7 |
Drives: Black 2SS RS Auto Join Date: Aug 2009
Location: SPOTSWOOD, NJ
Posts: 100
|
so far the fastest c-5 listed na car
Username: Gib Performance Mods: 427ci,heads/cam,CAI,LT,exhaust,converter,tune(L99,A6) Tires: Nitto 275-20" DR's on stock rims Category submitted for: Internal engine mods 60'........ 1.612 330'...... 4.669 1\8....... 7.207 MPH..... .97.45 1000'..... 9.385 1\4...... 11.223 MPH..... 125.31 Track: State Capital Raceway(Baton Rouge,LA) Date: 11/13/09 48.01 temp,29.92 baro,87% humdity for -373.7 DA 4020 lbs raceweight
__________________
Tune Time Performance built 416 C.I. 17/8" ARH & Exhaust, Airaid CAI, Vigilante T.C. 3600, Farks Supercars 6* Rollbar
Performanced tuned by Matt @ Tune Time Performance Toms River, NJ |
03-04-2011, 03:59 PM | #8 | |
Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,407
|
Quote:
I think that would be sweet as hell. I really dont want to install a cage though (which most tracks require after 11.49) |
|
03-04-2011, 04:27 PM | #9 | |
Banned
Drives: 2003 Cobra Convertible Join Date: Feb 2009
Location: CA
Posts: 2,925
|
Quote:
|
|
03-04-2011, 06:43 PM | #10 |
Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,706
|
Mines daily driver too, only for a few years untill I get another truck for the winter! I am cool with the 6 point after I get another truck but no gutting out my car either. Hopefully someone does it this summer, I think these cars will get into the 10s on a stock short block eventually! Its going to take me a few years, a few parts at a time but I will get there
__________________
10.91 at 122 H/C stock block N/A
|
03-05-2011, 06:43 AM | #11 |
Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,407
|
|
03-05-2011, 07:16 AM | #12 |
Yes - @ 9.99 Sec. - you have to go full roll cage...
__________________
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Check your Order here | bvonscott | Camaro Price | Ordering | Tracking | Dealers Discussions | 665 | 06-29-2009 01:00 PM |