12-02-2015, 09:01 AM | #1 |
Drives: 2014 Camaro LS V6 Join Date: Dec 2014
Location: Alexandria, VA
Posts: 148
|
Spoiler Install
Has anybody in the DMV had an aftermarket spoiler installed in their Camaro?
Thanks. |
12-03-2015, 05:34 AM | #2 |
Drives: 2013 1LE Join Date: Mar 2013
Location: maryland
Posts: 796
|
I installed my maverick man wing. Installed with factory holes and used a little double sided tape.
__________________
|
12-06-2015, 07:27 PM | #3 |
Drives: 2020 GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,278
|
Aftermarket spoilers are an easy install as long as they use the factory mounting holes.
__________________
2023 Camaro 2SS 1LE Summit White
1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 5000 - 5/30/2023 6000 - 6/03/2023 2020 GMC Sierra AT4 6.2L Black |
12-07-2015, 12:18 PM | #4 |
Drives: 2014 Camaro LS V6 Join Date: Dec 2014
Location: Alexandria, VA
Posts: 148
|
|
12-07-2015, 12:38 PM | #5 |
Drives: 2013 1LE Join Date: Mar 2013
Location: maryland
Posts: 796
|
If I had to have something installed like that. APAC in balitmore maybe?
https://www.facebook.com/Auto-Perfor...64477/?fref=ts
__________________
|
12-07-2015, 01:40 PM | #6 |
|
haha that makes it a little more difficult. Either find a trunk with the holes or measure twice and drill once.
|
12-07-2015, 02:15 PM | #7 |
Drives: 2013 1LE Join Date: Mar 2013
Location: maryland
Posts: 796
|
^measure 1000 times.
__________________
|
12-07-2015, 02:20 PM | #8 |
Drives: 2014 Camaro LS V6 Join Date: Dec 2014
Location: Alexandria, VA
Posts: 148
|
Ok guys so this local shop with pretty good ratings on Yelp is quoting me $100-150 Depending on time it takes, because they charge $100 per hour. Would Y'all consider this price fair for the installation?
|
12-07-2015, 03:10 PM | #9 |
Drives: 2013 1LE Join Date: Mar 2013
Location: maryland
Posts: 796
|
Ive never had it done so hard to say. Some come with templates as well.
That or id get a no drill spoiler that uses double sided tape. My subaru had one on for YEARS. no issues.
__________________
|
12-08-2015, 11:34 AM | #10 |
|
haha right
ummm, yea I think that's probably fair considering the work. after all the measuring, drilling and actual installation its probably about an hour worth of work. |
12-08-2015, 07:57 PM | #11 | |
Drives: Silver 2011 Camaro Join Date: Jun 2014
Location: Maryland
Posts: 67
|
I bought a spoiler from an eBay store. The color matched perfectly and I haven't had a problem with the quality. I also have an LS so I had to drill my own holes. The spoiler came with templates and instructions on how/where to drill.
This is the technique I used. |
|
12-09-2015, 06:43 AM | #12 |
H-Town Camaro Club
Drives: 2013 Dusk Edition 2SS/M6/Sun/NPP Join Date: May 2014
Location: Houston
Posts: 2,234
|
Just make sure to use 3M tape between the spoiler and trunk lid. Do not under any circumstances, bolt the wing directly to the lid. Even if you have a stock wing, pull it off and apply tape, GM has a recall service bulletin to repaint the car because of this.
|
|
|