AR Headers 2010 Camaro V6 Headers - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Anthony@ARH · 01-08-2010, 07:49 PM

Guys, We thought we’d give you a taste of what’s now available from ARH for you V6 Camaro. Our headers will come with our full system to the rear axle or the short system that ends where your cat back begins. Like everything we do, our V6 systems are 100% US. made using the finest 304 S/S materials. We’ll have photo’s of the entire system early next week. The headers are 1-3/4” with 2-1/2” merge collectors with scavenger spikes. The exhaust will be 2-1/2” and like the V8 system will feature an X-pipe and connection pipes that end at the rear axle. What’s really cool is that the headers allow you to re-use your factory exhaust gaskets that have a built in heat shield for the starter.

If you intend to keep your stock or aftermarket catback then our short system will do the trick. We haven’t dyno’d yet but we expect huge gains. The seat of the pants feel is extraordinary. The system really woke up this vehicle and a tune has not been done yet. Any other questions please feel free to ask. Thanks. We look forward to hearing from you.

Thanks
Anthony
ARH

Xanthos · 01-08-2010, 08:14 PM

Looks nice! Any plans at the moment for a 1 5/8 system?
- X

bluedevil02 · 01-08-2010, 10:00 PM

YGPM

streetsteve · 01-09-2010, 01:26 AM

will these bolt right up to the stock cats, will they trigger a check engine light, also sound clips and dyno numbers would be great

ron8879 · 01-09-2010, 08:03 AM

look nice...also wondering about if the bolt to stock cats and did it throw codes. Very nice work

PieNsky · 01-09-2010, 08:22 AM

Long tubes are the way to go for the most power ; however they do move the cats and will have a check engine light. I kept my exhaust manifolds and cats in case the EPA forces some type of check here in KY to comply with the clean air act. I live in one of the counties that may have to have it again but wanted LTs and could always switch back for the test once a year.

shad2009 · 01-09-2010, 08:22 AM

FINALLY!!!!!!

i cant wait 2 c the gains, i'll be ordering these when i get my car

UBNZO6D · 01-09-2010, 10:21 AM

As mine will be here soon, I'm very interested in these...

Greg

Anthony@ARH · 01-09-2010, 11:12 AM

Thanks for the interest guys! I will have further information very soon. Enjoy your weekend.

eynigush · 01-09-2010, 11:20 AM

Sent you a PM last night, waiting for a reply.

Thank You,
Eddie

A.R. Headers · 01-09-2010, 11:34 AM

Guys, The headers are made to work with ARH cats. Tuning is a must for optimum performance and CEL elimination. This is no different than any other long tube installed on a late model vehicle in terms of the CEL. The one thing you can be sure of is that it does not get better than this in terms of quality. Hang in there for more info and pics. Thanks.

Nick

Anthony@ARH · 01-09-2010, 03:12 PM

All Pm's have been answered. If you guys need anything else please let me know.

bijanmaleki · 01-09-2010, 03:25 PM

Awesome Product as always guys!!!

bluedevil02 · 01-10-2010, 10:45 PM

could you also get us a quote on the cats? maybe a cat/header combo price?

01-08-2010, 07:49 PM	#1
Anthony@ARH Drives: Black s2000, 749 ducati dark Join Date: Jul 2009 Location: NY Posts: 110	AR Headers 2010 Camaro V6 Headers Guys, We thought we’d give you a taste of what’s now available from ARH for you V6 Camaro. Our headers will come with our full system to the rear axle or the short system that ends where your cat back begins. Like everything we do, our V6 systems are 100% US. made using the finest 304 S/S materials. We’ll have photo’s of the entire system early next week. The headers are 1-3/4” with 2-1/2” merge collectors with scavenger spikes. The exhaust will be 2-1/2” and like the V8 system will feature an X-pipe and connection pipes that end at the rear axle. What’s really cool is that the headers allow you to re-use your factory exhaust gaskets that have a built in heat shield for the starter. If you intend to keep your stock or aftermarket catback then our short system will do the trick. We haven’t dyno’d yet but we expect huge gains. The seat of the pants feel is extraordinary. The system really woke up this vehicle and a tune has not been done yet. Any other questions please feel free to ask. Thanks. We look forward to hearing from you. Thanks Anthony ARH

01-08-2010, 08:14 PM	#2
Xanthos PWA Relapse Drives: Formerly-Stick Join Date: Mar 2008 Location: Oklahoma Posts: 12,588 View My Garage	Looks nice! Any plans at the moment for a 1 5/8 system? - X __________________ 2017 1LT/RS A8 Hyper Blue Metallic

01-09-2010, 08:03 AM	#5
ron8879 Drives: 2018 Camaro RS Join Date: Aug 2008 Location: Centralia MO Posts: 423	look nice...also wondering about if the bolt to stock cats and did it throw codes. Very nice work __________________ Fifty years from now, when you're looking back at your life, don't you want to be able to say you had the guts to get in the car?" : *HOTROD2010 VR RPO 14568...flowmaster exhaust, color matched antenna and drip rails, barton shifter, 4 pack gauges, leather armrest, color matched spoiler, and emblem delete, 20x9 chrome wheels HOTROD2018*...RS camaro LT1 Npp Exhaust, SS front brakes package and cooling packaage, black bowties, more updates to come!

01-09-2010, 08:22 AM	#7
shad2009 "Cassie" Drives: 2007 Tungsten Grey Mustang GT Join Date: Sep 2009 Location: Massachusetts Posts: 1,153	FINALLY!!!!!! i cant wait 2 c the gains, i'll be ordering these when i get my car __________________ Currently driving - 2007 Mustang GT Future Wheels - 2014 Ford Mustang GT & 2014 Chevy Camaro

01-09-2010, 11:20 AM	#10
eynigush SoCal C5 Family Member Drives: 2010 Camaro SSRS Rally Yellow Join Date: Oct 2009 Location: San Diego, CA Posts: 412 View My Garage	Sent you a PM last night, waiting for a reply. Thank You, Eddie __________________ Kooks 1 7/8 headers w/high flow cats Magnaflow Cat-back Competition Series Cold Air Intake by CAI Inc.

01-08-2010, 10:00 PM	#3
bluedevil02 Drives: 2LT/RS Join Date: Jul 2009 Location: San Antonio Posts: 844	YGPM

01-09-2010, 01:26 AM	#4
streetsteve Drives: 05 srt-4, e1 turbo,too fast for fwd Join Date: Oct 2009 Location: Yuma, AZ Posts: 74	will these bolt right up to the stock cats, will they trigger a check engine light, also sound clips and dyno numbers would be great

01-09-2010, 08:22 AM	#6
PieNsky Drives: Victory Red 1LS Join Date: Nov 2008 Location: Louisville,KY Posts: 1,929 View My Garage	Long tubes are the way to go for the most power ; however they do move the cats and will have a check engine light. I kept my exhaust manifolds and cats in case the EPA forces some type of check here in KY to comply with the clean air act. I live in one of the counties that may have to have it again but wanted LTs and could always switch back for the test once a year.

01-09-2010, 10:21 AM	#8
UBNZO6D Drives: ZL1 Join Date: Dec 2009 Location: Socal Posts: 291	As mine will be here soon, I'm very interested in these... Greg

01-09-2010, 11:12 AM	#9
Anthony@ARH Drives: Black s2000, 749 ducati dark Join Date: Jul 2009 Location: NY Posts: 110	Thanks for the interest guys! I will have further information very soon. Enjoy your weekend.

01-09-2010, 11:34 AM	#11
A.R. Headers Drives: Pontiac G8 GT Join Date: May 2009 Location: new york Posts: 263	Guys, The headers are made to work with ARH cats. Tuning is a must for optimum performance and CEL elimination. This is no different than any other long tube installed on a late model vehicle in terms of the CEL. The one thing you can be sure of is that it does not get better than this in terms of quality. Hang in there for more info and pics. Thanks. Nick __________________ www.AmericanRacingHeaders.com 100% USA MADE

01-09-2010, 03:12 PM	#12
Anthony@ARH Drives: Black s2000, 749 ducati dark Join Date: Jul 2009 Location: NY Posts: 110	All Pm's have been answered. If you guys need anything else please let me know.

01-09-2010, 03:25 PM	#13
bijanmaleki Drives: 04 GTO/10 Camaro/69 Camaro Join Date: Sep 2009 Location: Scottsdale AZ Posts: 35	Awesome Product as always guys!!! __________________ 04 Goat, 69 Camaro, 2010 Camaro

01-10-2010, 10:45 PM	#14
bluedevil02 Drives: 2LT/RS Join Date: Jul 2009 Location: San Antonio Posts: 844	could you also get us a quote on the cats? maybe a cat/header combo price?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
PEDDERS SUCCESSFULLY FITS 305s ON ALL 4 CORNERS!	Info@PeddersUSA.com	Suspension / Brakes / Chassis	467	06-11-2013 09:45 PM
An interesting Camaro (and GM) story! I just bought my 2010 Camaro!	Camarodriver	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	12	11-28-2010 03:52 PM
V6 Camaro Owners! 2010 V6 Zex Nitrous System now available!	Kris@BMCPerformance	Forced Induction	3	01-23-2010 02:41 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM