Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)


Reply
 
Thread Tools
Old 11-18-2011, 03:45 PM   #1
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
QuickTime bellhousing and new midplate pictures

Finally this package has been tested and is ready and I should have 3 units shortly. The bellhousing is a custom QuickTime SFI approved bellhousing and the midplate is made by Tremec. The pricing will be $3,995 INCLUDING the upgrades inside the transmission. The 9310 shafts are available as an option. I do have 2 Camaro TR6060 I can build from so you don't have to have any down time. Please let me know if anyone is interested. These should go pretty quick!








rick@tandtperformance is offline   Reply With Quote
Old 11-19-2011, 10:37 AM   #2
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
One unit has been sold. 2 units still avialable.
rick@tandtperformance is offline   Reply With Quote
Old 11-19-2011, 12:15 PM   #3
SSE 4 2SS
Boosted Moderator
 
SSE 4 2SS's Avatar
 
Drives: Bone Stock LS3
Join Date: Sep 2009
Location: Kyle Tx
Posts: 15,023
Send a message via AIM to SSE 4 2SS Send a message via Yahoo to SSE 4 2SS
Quote:
Originally Posted by rick@tandtperformance View Post
One unit has been sold. 2 units still avialable.
Very nice looking... If my current mod attempts dont work out, I'll have to spend a chunk of change with you for a fully built one with the bellhousing and midplate... Staying tuned...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley

Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you.

“If everything seems under control, you're just not going fast enough.” Mario Andretti

If you can turn, you ain't going fast enough...
SSE 4 2SS is offline   Reply With Quote
Old 11-24-2011, 01:47 PM   #4
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
Quote:
Originally Posted by SSE 4 2SS View Post
Very nice looking... If my current mod attempts dont work out, I'll have to spend a chunk of change with you for a fully built one with the bellhousing and midplate... Staying tuned...


I have one left!!!!!
rick@tandtperformance is offline   Reply With Quote
Old 11-24-2011, 03:13 PM   #5
boostedyards86
 
boostedyards86's Avatar
 
Drives: Cummins 3500
Join Date: Jul 2009
Location: Pgh PA
Posts: 611
i have one of the first ones...it was not made properly and i had to modify my shifter to make it fit. I was supposed to be sent one of these new ones. Any word on this?
__________________
85 Buick TType - 5.3l GT4202r 10.86 at 126
boostedyards86 is offline   Reply With Quote
Old 11-25-2011, 01:13 PM   #6
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
Quote:
Originally Posted by boostedyards86 View Post
i have one of the first ones...it was not made properly and i had to modify my shifter to make it fit. I was supposed to be sent one of these new ones. Any word on this?
You might want to contact the company who sold you the bell for details.
rick@tandtperformance is offline   Reply With Quote
Old 11-26-2011, 02:54 PM   #7
ls427ray
Banned
 
Drives: 2010 camrao
Join Date: Sep 2011
Location: camaro5.com
Posts: 115
my tranny is already build by rpm transmissions. can i buy just the scatter shield?
if so, how much?
ls427ray is offline   Reply With Quote
Old 11-26-2011, 03:05 PM   #8
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
Quote:
Originally Posted by ls427ray View Post
my tranny is already build by rpm transmissions. can i buy just the scatter shield?
if so, how much?
You cannot use the bellhousing without the new front cover (midplate). The transmission has to be set up again since it will change the preload on the main and countershaft. Please call me for details.
rick@tandtperformance is offline   Reply With Quote
Old 11-29-2011, 02:54 PM   #9
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
Last one has been sold! I'll be getting another batch sometime in late January. Please PM me if you're interested getting one.
rick@tandtperformance is offline   Reply With Quote
Old 01-13-2012, 06:41 PM   #10
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
This is what it looks like when assembled without the bell. This one has the best of everything including the 9310 shaft with rear support bearing.

rick@tandtperformance is offline   Reply With Quote
Old 01-16-2012, 01:21 AM   #11
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
Good shot of the rear support bearing.

rick@tandtperformance is offline   Reply With Quote
Old 04-12-2012, 09:01 PM   #12
Simster
 
Simster's Avatar
 
Drives: 2010 Camaro 2SS/RS LS3 CGM
Join Date: Feb 2010
Location: Narvon, PA
Posts: 255
Send a message via Skype™ to Simster
Quote:
Originally Posted by rick@tandtperformance View Post
This is what it looks like when assembled without the bell. This one has the best of everything including the 9310 shaft with rear support bearing.
Thanks Rick! I should be on the road hopefully by this weekend. Sorry for putting you through all the hassle with this build. If anyone has any doubts about doing this upgrade, I can attest that Rick will go to lengths to make this perfect and leave you assured you made the right choice choosing him to do this build. I can't wait to get this down the track.

-John
__________________
Cammed and blown with all the goodies to support the 700+ HP

Simster is offline   Reply With Quote
Old 04-12-2012, 09:07 PM   #13
rick@tandtperformance
 
rick@tandtperformance's Avatar
 
Drives: Corvette
Join Date: Aug 2011
Location: Frederick
Posts: 101
Quote:
Originally Posted by Simster View Post
Thanks Rick! I should be on the road hopefully by this weekend. Sorry for putting you through all the hassle with this build. If anyone has any doubts about doing this upgrade, I can attest that Rick will go to lengths to make this perfect and leave you assured you made the right choice choosing him to do this build. I can't wait to get this down the track.

-John
No problem. I can't wait to see that BEAST on the road!
rick@tandtperformance is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:02 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.