Mounting Aftermarket Subwoofer - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dz488 · 07-31-2014, 03:08 AM

yo, I was curious how you guys mount your subwoofers in the trunk. I have a Rockford Fosgate p300-10 subwoofer and i'm wanting to get some insight on mounting down my sub. What do you all prefer? Feedback appreciated. I will monitor my thread and answer questions if requested.

SSteven · 07-31-2014, 08:58 AM

I have a small downfiring, shallow box with a 10 in it. I just attached velcro to the bottom and it stays in place even with agressive driving.

jeffa · 07-31-2014, 12:47 PM

Sub Thump 10" drivers side sub enclosure. I had on on my '12 LT, and am getting ready to move it to my new '14 2LT.

Built very well, fits perfectly into the rear driver's side quarter panel area....highly recommended and looks factory stock.

yzark99 · 08-02-2014, 09:58 AM

I have a 12" in a box that sits on a custom rack that I built. I have 2 spring-loaded hooks with sliding catches that attach to ring bolts on the sides of the box. The springs are attached to the rear deck with nylon cable ties. The box is tight against the rear deck, but can easily be removed when needed.

07-31-2014, 03:08 AM	#1
Dz488 Drives: 2SS White w/ Black vinyl stripe Join Date: Jun 2014 Location: United States Posts: 12 View My Garage	Mounting Aftermarket Subwoofer yo, I was curious how you guys mount your subwoofers in the trunk. I have a Rockford Fosgate p300-10 subwoofer and i'm wanting to get some insight on mounting down my sub. What do you all prefer? Feedback appreciated. I will monitor my thread and answer questions if requested.

07-31-2014, 08:58 AM	#2
SSteven Drives: 2013 ZL1 Black Join Date: Aug 2013 Location: Dallas Posts: 411	I have a small downfiring, shallow box with a 10 in it. I just attached velcro to the bottom and it stays in place even with agressive driving. __________________ 2013 ZL1 (purchased 3/2017 with 5k miles) - Black/Auto/Nav/Sunroof/Rotofab CAI/RDP tuned/1 7/8" LT Speed Engineering Headers w/TSP HF Cats/NPP with 3-way control switch/HD-Link Previous Camaro (sold 11/2015): 2012 2SS - Auto/RS/Black/Sunroof/MyLink Nav/SP 1 7/8" LT Headers w/HF Cats/Hybrid SW Retro Catback w/Borla Pro XS Mufflers/ADM Dyno Tune/C.A.I. CAI/Vmax Spiral Ported Throttle Body/APEX Catch Can/275x4 Squared Wheel Setup/Custom Fit Full Size Spare/Ceramic Tint Replaced with 2013 Black Dodge Charger SRT8

08-02-2014, 09:58 AM	#4
yzark99 I run 2 catch cans... Drives: 2012 1LT SIM Auto Join Date: Oct 2011 Location: OR there Posts: 1,038 View My Garage	I have a 12" in a box that sits on a custom rack that I built. I have 2 spring-loaded hooks with sliding catches that attach to ring bolts on the sides of the box. The springs are attached to the rear deck with nylon cable ties. The box is tight against the rear deck, but can easily be removed when needed. __________________ Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust View my top 3 LFX performance mods and more: .

07-31-2014, 12:47 PM	#3
jeffa Drives: 2014 2LT/RS Ashen Gray Metallic Join Date: Nov 2011 Location: Redondo Beach, CA Posts: 585	Sub Thump 10" drivers side sub enclosure. I had on on my '12 LT, and am getting ready to move it to my new '14 2LT. Built very well, fits perfectly into the rear driver's side quarter panel area....highly recommended and looks factory stock.