little help please - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ELIC1 · 04-07-2014, 09:02 PM

hey guys going to get a clear bra on my front bumber. anyone that has one how do you like it. also i have a piece of vinly on my front bumper will the bra go over that with any issues thanks guys

paslag · 04-07-2014, 09:42 PM

It will go over vinyl, but it will become glossy if its matte

Envoyé de mon iPhone avec Tapatalk

ELIC1 · 04-07-2014, 09:46 PM

hey thanks the vinly is gloss.

jrhagen · 04-07-2014, 09:46 PM

If you get a clear bra, make sure it is CAD cut and not bulk cut. CAD is pre-cut by a computer program. Bulk is cut on the car with single edge blades. You WILL end up with slice marks with a bulk install. CAD cost a little more but worth the peace of mind. I learned the hard way and had to have the entire front of my car repainted.

ELIC1 · 04-07-2014, 09:51 PM

the clear bra i am gettoing is from xpel i think and its pre cut already this is what i was told. its going to cover the bumper and the gm gfx piece as well

CamaroI · 04-07-2014, 10:59 PM

I had one for awhile. Not a fan. Had the car 4 years already and needed to remove it since starting to look bad. Once I did could see difference in paint between non clear bra and where clear bra had been

04-07-2014, 09:02 PM	#1
ELIC1 Account Suspended Drives: black and silver Join Date: Apr 2014 Location: new york Posts: 1,728	little help please hey guys going to get a clear bra on my front bumber. anyone that has one how do you like it. also i have a piece of vinly on my front bumper will the bra go over that with any issues thanks guys

04-07-2014, 09:42 PM	#2
paslag Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009 Location: Québec, Canada Posts: 177	It will go over vinyl, but it will become glossy if its matte Envoyé de mon iPhone avec Tapatalk __________________ 2010 2ss/rs Ls3, E-force s/c, 3.25'' pulley,Kooks long tubes w/cats, magnaflow 2.5" cat back, Rotofab cai, 65 lbs inj, MSD bap, AEM water/meth, comp cam, 621whp,577 wtq on mustang dyno

04-07-2014, 09:46 PM	#3
ELIC1 Account Suspended Drives: black and silver Join Date: Apr 2014 Location: new york Posts: 1,728	hey thanks the vinly is gloss.

04-07-2014, 09:46 PM	#4
jrhagen Banned Drives: Camaro Join Date: Mar 2013 Location: USA Posts: 2,701	If you get a clear bra, make sure it is CAD cut and not bulk cut. CAD is pre-cut by a computer program. Bulk is cut on the car with single edge blades. You WILL end up with slice marks with a bulk install. CAD cost a little more but worth the peace of mind. I learned the hard way and had to have the entire front of my car repainted.

04-07-2014, 09:51 PM	#5
ELIC1 Account Suspended Drives: black and silver Join Date: Apr 2014 Location: new york Posts: 1,728	the clear bra i am gettoing is from xpel i think and its pre cut already this is what i was told. its going to cover the bumper and the gm gfx piece as well

04-07-2014, 10:59 PM	#6
CamaroI Drives: 2010 IOM Camaro Join Date: Aug 2012 Location: DFW Posts: 3,112	I had one for awhile. Not a fan. Had the car 4 years already and needed to remove it since starting to look bad. Once I did could see difference in paint between non clear bra and where clear bra had been