04-22-2010, 11:19 AM | #1 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
"The Grey Eagle" Monstertodd's SS build
I picked up my CGM 2SS/RS M6 with SIM stripes on November 23rd 2009.
I purchased my car from Jimmy Johnson Chevrolet in San Diego, CA. It was a dealer transfer car that was originally ordered by a dealership in New York. It is VIN: 40196. It has the GM badges of excellence, as well as the GM performance division badge under the hood. It does not have back up sensors. Here are some pictures from the day I picked her up. enjoy. I've already modified the car somewhat. My first mod was a skip shift eliminator that I bought on Ebay. It's not an SLP unit. I haven't had ANY trouble from it, and it's worked flawlessly. No pictures of the install though sorry. I think I paid $12.95 plus shipping. I'm not planning to do any serious drive train or engine mods, but I do have a laundry list of items I'd like to replace. It's going to be one thing at a time with this car though. Here are a couple of smaller mods that I have performed thus far. DIY foglight mod for RS equipped cars. To be honest with you, I'm not real impressed with the light output of the fogs after this mod. I used the DIY method which involved soldering zener diodes in-line with the wire harness for the foglights. I'm seriously considering reversing this mod, and purchasing one of the plug and play harnesses. I had SLP SS emblems on my front and rear, removed them and replaced them with Trailblazer SS logo's, and then finally removed those and installed Sparks Restoration SS logo's. Yes I know, they are ridiculously expensive, but in my opinion, completely worth it. GM painted heritage grill Sparks Restoration SS emblems Last edited by monstertodd; 01-19-2012 at 01:44 PM. |
04-22-2010, 11:27 AM | #2 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
Fuzzy Dice Mod
Here is one of the most important modifications to date:
The Fuzzy Dice Mod Barton short throw shifter with brushed aluminum knob Lingenfelter aluminum racing pedals. These look rad! Last edited by monstertodd; 11-09-2011 at 03:52 PM. |
04-22-2010, 11:29 AM | #3 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
Last edited by monstertodd; 03-05-2011 at 08:49 AM. |
04-22-2010, 11:48 AM | #4 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
The picture above shows my car prior to installing my Pfadt say bars and lowering springs. The pic below is after the install. Added an MPD1 spoiler. Looks great but I can't wait to extend my stripes. Going on the Dyno Here you can see my new Pfadt Sway bars and lowering springs Turning 10,000 miles. Last edited by monstertodd; 11-09-2011 at 03:54 PM. |
04-22-2010, 05:50 PM | #5 |
Drives: 04 Ram 2500 & 2010 Camaro 2SS/RS Join Date: Feb 2010
Location: Missoula, Montana
Posts: 1,301
|
The silver stripes look sharp! I was torn between black and silver, but went the black route on my car. Looks like I couldn't have gone wrong either way!
|
04-22-2010, 09:13 PM | #6 |
Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
|
Looks cool like the stripes with the gray
|
04-24-2010, 09:26 AM | #7 |
Drives: Cyber Gray 2SS -RS Join Date: Mar 2010
Location: Dallas
Posts: 176
|
|
06-01-2010, 10:12 PM | #8 |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Any new updates to report?
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
06-02-2010, 08:36 PM | #9 |
Banned
|
ima get a pair of dice...that looks MAD BOSS! no lie! lmao
|
06-07-2010, 03:29 PM | #10 |
Tampa Gulf Coast Family
|
Awesome CGM!
__________________
|
07-17-2010, 04:28 AM | #11 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
None yet, all mods are on hold until I return from Afghanistan in September.
Although, I have put in my order with mike the powder-coater for my brake calipers. I think I'm going to add some red stainless braided brake lines in there as well. And perhaps some slotted rotors at some point. |
09-13-2010, 09:33 PM | #12 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
Posted some new mods in post #3!!!!
|
11-07-2010, 01:22 AM | #13 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
New mods in post #4.
|
03-05-2011, 08:50 AM | #14 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
I love my car!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
This site is like crack. You know you're addicted to Camaro5 when... | GameOver620 | 5th Gen Camaro SS LS LT General Discussions | 463 | 01-03-2011 02:28 PM |
My SIM so far (a work in progress) | JChen | Member Car Journals | 28 | 06-28-2010 05:11 AM |
** Black SS/RS M6 - Work in Progress ** | SS/RS | Member Car Journals | 2 | 10-11-2009 03:58 PM |