05-18-2020, 09:49 AM | #1 |
Drives: Camaro 2014 Join Date: May 2020
Location: Texas
Posts: 1
|
Help Can This Be Fixed
2014 camaro do yall have any idea if this can be fixed and could give me a guesstimate
I know it's hard to tell by pics. Please any and all help would be wonderful. And it still drives and reverses fine! |
05-18-2020, 10:06 AM | #2 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Anything CAN be fixed. If just superficial damage, it shouldn't cost too much. If damage got into suspension and cradle, much more expensive. But either way, that isn't a total.
|
05-18-2020, 10:16 AM | #3 |
Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020
Location: WNY
Posts: 733
|
How is the hood & door? It doesn't look horrible but sometimes you don't know either until you get it apart & see what damage is behind it.
|
05-18-2020, 10:33 AM | #4 |
Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009
Location: South of Raleigh, NC
Posts: 9,477
|
Call Jake at State Farm
__________________
|
05-18-2020, 10:45 AM | #5 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
I think I met him. Wasn't he your neighbor the last place you lived?
__________________
|
05-18-2020, 11:33 AM | #6 |
Started#gottalovethatblue
|
This doesn't look too bad, but from 1 picture it's hard to give an accurate estimate. Looks like you're going to need a front bumper cover and fender, possible an inner fender liner. Hopefully you won't need a door, hood, or suspension work. What happened?
__________________
|
05-18-2020, 11:46 AM | #7 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,570
|
Yes, that can definitely be fixed. I recently had some damage done to my passenger side fender. The estimate did not include the front bumper as that was not damaged at all. So you would have to figure that in as well.
Replacement fender and badges, paint (w/ blending), materials, & labor was estimated at $1180. That is at a very good shop near me, not some dump. Assuming your door and hood are fine then I would guess a total of around $2000-2300, maybe lower since the front bumper is fairly inexpensive. But you need a new side marker light and possibly wheel well liner, so it's hard to say without seeing it in person.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
05-18-2020, 01:04 PM | #8 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
From what I can see:
Fender Front Bumper Side marker light Fender liner* Fender bracket* Side marker light wiring harness* * possibility. New paint for fender, front bumper and blend into door panel. Last edited by mikeman; 05-18-2020 at 02:08 PM. |
05-18-2020, 01:55 PM | #9 |
Banned
Drives: cheby Camaro Join Date: Aug 2019
Location: usa
Posts: 575
|
We will send a drone over in a few mins. Please have the car parked outside.
|
05-18-2020, 02:07 PM | #10 |
Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020
Location: WNY
Posts: 733
|
|
05-18-2020, 02:16 PM | #11 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
|
05-19-2020, 07:50 PM | #12 |
Account Suspended
Drives: 2014 camaro SS Join Date: Jan 2019
Location: nj
Posts: 268
|
|
05-19-2020, 07:58 PM | #13 |
Evil Genius of Chevrolet
Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017
Location: New York
Posts: 3,260
|
Based off over 20 years as a PPG certified painter......... that's around 3,500 to 4k in repair cost. Plus silvers and light grays are tricky to blend due to the metallic flop variables. Good luck with it
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
|
05-19-2020, 08:55 PM | #14 |
Sporting Foole
Drives: 2010 Camaro SS Join Date: Sep 2019
Location: Alabama
Posts: 500
|
|
|
|
|
|