03-10-2012, 10:38 PM | #1 |
Drives: 2011 Cyber Gray Camaro Join Date: Mar 2012
Location: Salt Lake City, UT
Posts: 152
|
QUICK HEADERS INSTALL HELP!!!!!
basically done installing my bbk headers and the Oxygen sensor underneath on the drivers side is too short, so i just zip tied it up and figured i would deal with it tomorrow...
I started my car and it instantly turned off. Is that because the oxygen sensor is unplugged under there??? or is something else up???
__________________
BBk LT Headers/ Injen LT CAI/ MRT v2/ RX Catch Can/ Black Ice Insulator/ Trifecta Tune/
|
03-10-2012, 10:44 PM | #2 |
|
I don't think it's cuz of the o2sensor since its plugged in it would just throw a code,,,did you tight ur spark plugs good enough,, did u crack any of them? What else did you disconnect?
__________________
top 10 reason why real men drive stick. 10. A manual transmission is the ultimate in control 9. You can use automotive jargon and not sound like a total tool 8. You can't spell "manual" without "man" 7. Manual transmissions prove you can do more than one thing at a time 6. You can't drift in an auto 5. You can't pull fancy moves in an automatic 4. You get better fuel economy with a stick 3. You’ll never look like a chump if you can drive stick 2. Manual transmission cars are faster 1. Women like a guy who is good with his hands. |
03-10-2012, 11:16 PM | #3 |
Drives: 2011 Cyber Gray Camaro Join Date: Mar 2012
Location: Salt Lake City, UT
Posts: 152
|
feewwwwww, we're all good. I had forgotten to plug back in the mass airflow sensor.
N000000BBBBBBBB..... Any idea where i can get an extension for the Oxygen sensor underneath the driver side. (lower sensor) It's the random square one while the others + their extenders were kind of oval shaped....
__________________
BBk LT Headers/ Injen LT CAI/ MRT v2/ RX Catch Can/ Black Ice Insulator/ Trifecta Tune/
|
03-11-2012, 01:06 AM | #4 |
Drives: 2010 Camaro LS Join Date: Mar 2010
Location: Newton Falls, OH
Posts: 1,092
|
__________________
|
03-11-2012, 03:37 AM | #5 |
Drives: 2011 Cyber Gray Camaro Join Date: Mar 2012
Location: Salt Lake City, UT
Posts: 152
|
Thanks Cntyrman77! Appreciate it.
__________________
BBk LT Headers/ Injen LT CAI/ MRT v2/ RX Catch Can/ Black Ice Insulator/ Trifecta Tune/
|
03-11-2012, 07:10 AM | #6 | ||
having FUN now 13.66@101
|
Quote:
Quote:
__________________
|
||
03-11-2012, 09:17 AM | #7 |
The Milano
Drives: 2017 Firefly ShipWorks Join Date: Jun 2010
Location: Chicagoland (Crown Point, IN)
Posts: 1,877
|
Kinda makes you wonder why BBk is shipping the wrong parts wih it's kit. Hasn't someone called to tell ten there kit is wrong?
__________________
My first Love. She was called "Miss Carriage" (still cry when I think about her)
383, Muncie 4 speed, custom linkage mated to hurst short throw shifter. |
03-11-2012, 03:09 PM | #8 |
Drives: 2011 Cyber Gray Camaro Join Date: Mar 2012
Location: Salt Lake City, UT
Posts: 152
|
So the headers install, 10 hours later, turned out great! I love the sound, but a quick question...
Does my computer need to 'learn' them??? Too be honest, didn't really notice a difference in power. Will That come with a little time??
__________________
BBk LT Headers/ Injen LT CAI/ MRT v2/ RX Catch Can/ Black Ice Insulator/ Trifecta Tune/
|
03-11-2012, 03:25 PM | #9 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,862
|
Did you disconnect the battery? They say it's a good idea to do so when doing a mod affecting air/fuel ratio. It resets the ECM and allows it to relearn the new situation more quickly.
Short answer: Yes! |
03-11-2012, 03:30 PM | #10 |
Drives: 2011 Cyber Gray Camaro Join Date: Mar 2012
Location: Salt Lake City, UT
Posts: 152
|
I did disconnect the battery so hopefully it will kick in soon. Either way, i love the way the BBKs sound with the MRT v2 so it's still worth it
__________________
BBk LT Headers/ Injen LT CAI/ MRT v2/ RX Catch Can/ Black Ice Insulator/ Trifecta Tune/
|
03-11-2012, 07:39 PM | #11 |
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
same set up , love the sound as well
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
03-11-2012, 07:45 PM | #12 |
Back on the dino-juice
Drives: '10 LS + a few more Join Date: May 2010
Location: Texas
Posts: 1,641
|
BBK did send the extenders with the headers? The one may seem too short with the extender but others were able to pull some slack from the harness that was keeping it too short.
People let them know at least 2-years ago that the plugs on their extenders were wrong and needed to have a tab cut. Apparently they don't really care?
__________________
I wake up in the morning and I piss excellence.
-Ricky Bobby America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936 |
03-12-2012, 10:28 AM | #13 |
Drives: 2011 Cyber Gray Camaro Join Date: Mar 2012
Location: Salt Lake City, UT
Posts: 152
|
Did anyone get a loud vibration noise coming from either inside the dash or engine after installing headers???
And hopefully figure out what it is?? It only happens during the cold start, but it's annoying.
__________________
BBk LT Headers/ Injen LT CAI/ MRT v2/ RX Catch Can/ Black Ice Insulator/ Trifecta Tune/
|
03-12-2012, 10:54 AM | #14 |
|
Check all the bolts..header bolts...amd thhe connection bolts for he exhaust..sounds like something is loose..my driends made a noise once we installed..one of the bolts were not tightened enough
__________________
top 10 reason why real men drive stick. 10. A manual transmission is the ultimate in control 9. You can use automotive jargon and not sound like a total tool 8. You can't spell "manual" without "man" 7. Manual transmissions prove you can do more than one thing at a time 6. You can't drift in an auto 5. You can't pull fancy moves in an automatic 4. You get better fuel economy with a stick 3. You’ll never look like a chump if you can drive stick 2. Manual transmission cars are faster 1. Women like a guy who is good with his hands. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY : Install headers on 2010 Camaro SS | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 70 | 06-25-2020 06:40 PM |
Complete ******** install from a Novice | Susantroy1 | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 63 | 07-31-2015 01:25 PM |
SNEAK PEAK! 2010 camaro RS V6 gains 33HP and torque with install of BBK headers! | brothersperformance.com | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 138 | 02-21-2011 03:27 PM |
Can I install a Maggie TVS2300 without Headers? | speed racer | Forced Induction - V8 | 19 | 04-12-2010 05:37 PM |