Aggressor 2 Bumper: Group Buy Feeler - Page 28 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Uhoh5oh · 08-20-2015, 02:43 PM

Quote:

Originally Posted by hush18

I might end up going the phantom grille route. Did you have the same problem with the stock grille at the top of the bumper as well? How did you install the phantom? I'm assuming you mounted it more towards the front than you typically would in order to hide the tabs. I'd just be worried about whether or not the grille fills the whole space. I'd really like to get the DJ Grilles Predator grille, but I have no budget for that at the moment.

I drilled holes every 4 inches in the top and bottom of the phantom grille. The drilled corresponding holes in the bumper. The grille now bolts to the bumper. It filled the space nicely and gave the flimsy pos some stability.

MGD · 08-20-2015, 03:55 PM

Quote:

Originally Posted by hush18

OK here's what I'm looking at right now:

And the leftover hardware from the other bumper:

I don't think this grill is installed correctly. The bumper skin should go in the grove of the grill. Check the pictures below.

vroomapunk · 08-20-2015, 04:59 PM

Quote:

Originally Posted by MGD

I don't think this grill is installed correctly. The bumper skin should go in the grove of the grill. Check the pictures below.

He is trying that, but the stupid tabs aren't the right shape, so they don't slide in. As far as I can tell he has the tabs in the right place, but they need to be dremeled in order to fit

GetSmart · 08-21-2015, 09:54 PM

Damn...I really wanted this bumper, but it doesn't seem worth the trouble.

DesertCamaro · 08-23-2015, 11:55 AM

It does look sweet when done up. But.... I'd lose my mind if someone backed into it and I'd have to go thru this process all over again.

mp51998 · 08-25-2015, 12:59 AM

Quote:

Originally Posted by DesertCamaro

It does look sweet when done up. But.... I'd lose my mind if someone backed into it and I'd have to go thru this process all over again.

If the one on my wifes car gets damaged we will go back to the SS or maybe the ZL1. This was too much hassle. Does look good though once finished.

Blckscrpn · 09-24-2015, 11:35 PM

Can anyone please tell me the make and model number of the aggressor 2 bumper LED's? Mine are starting to go dim.

Blckscrpn · 09-29-2015, 02:10 PM

Can someone please tell me the name of the company that makes the DRL's that come with the bumper and the model number?

dorfmac · 09-29-2015, 10:36 PM

It's so unfortunate that this bumper is such a piece of shit when it looks so good. Really a bummer.

desieng · 10-05-2015, 10:34 PM

Quote:

Originally Posted by Blckscrpn

Can someone please tell me the name of the company that makes the DRL's that come with the bumper and the model number?

Don't got a name but took pics of the box.

Did anyone buy the DRL harness for gen5diy for this bumper?

hush18 · 10-06-2015, 09:31 AM

Quote:

Originally Posted by desieng

Don't got a name but took pics of the box.

Did anyone buy the DRL harness for gen5diy for this bumper?

I did, they work like a charm. Btw everyone, I'm planning on going the predator grill route during black Friday and bolting it to the bumper. It should look pretty good after that.

desieng · 10-06-2015, 12:42 PM

Quote:

Originally Posted by hush18

I did, they work like a charm. Btw everyone, I'm planning on going the predator grill route during black Friday and bolting it to the bumper. It should look pretty good after that.

Which specific harness goes with this bumper?

Is it this one?

http://www.gen5diy.com/Rideskinz-Adapter/

Just want to make sure this is the right one for keeping LEDs on with headlights...

Blckscrpn · 10-07-2015, 11:14 AM

Thank you Desieng!!! I really appreciate the pic.!!I will try to find them online. I cannot get Tony to respond to any of my messages. It's been about a month and I've left him three or four different messages.

Uhoh5oh · 10-07-2015, 11:17 AM

Quote:

Originally Posted by Blckscrpn

Thank you Desieng!!! I really appreciate the pic.!!I will try to find them online. I cannot get Tony to respond to any of my messages. It's been about a month and I've left him three or four different messages.

Pretty much disappeared after that group buy......wonder why. No kind words to say here.

08-21-2015, 09:54 PM	#382
GetSmart Drives: 2013 Black SS Join Date: Mar 2013 Location: Hawaii Posts: 216 View My Garage	Damn...I really wanted this bumper, but it doesn't seem worth the trouble. __________________ Rotofab CAI, VMAX PTB, Borla S axle-back, Dynatech SuperMaxx 1 7/8" headers/HF cats, No weeds exhaust diverters, Apex air scoop & catch can, Rohana wheels, MPD1 Z-Force Hood, BTR Stage 3 cam, Vitesse Throttle Controller, etc...

08-23-2015, 11:55 AM	#383
DesertCamaro Drives: Fast Join Date: Mar 2011 Location: Phoenix, AZ Posts: 785	It does look sweet when done up. But.... I'd lose my mind if someone backed into it and I'd have to go thru this process all over again. __________________ 2014 SS

09-24-2015, 11:35 PM	#385
Blckscrpn Drives: 2012 LT Join Date: Apr 2015 Location: NJ Posts: 42	Can anyone please tell me the make and model number of the aggressor 2 bumper LED's? Mine are starting to go dim.

09-29-2015, 02:10 PM	#386
Blckscrpn Drives: 2012 LT Join Date: Apr 2015 Location: NJ Posts: 42	Can someone please tell me the name of the company that makes the DRL's that come with the bumper and the model number?

09-29-2015, 10:36 PM	#387
dorfmac www.macsautodetail.com Drives: 2010 2LT/RS Join Date: Nov 2011 Location: Baltimore Posts: 1,894 View My Garage	It's so unfortunate that this bumper is such a piece of shit when it looks so good. Really a bummer.

10-07-2015, 11:14 AM	#391
Blckscrpn Drives: 2012 LT Join Date: Apr 2015 Location: NJ Posts: 42	Thank you Desieng!!! I really appreciate the pic.!!I will try to find them online. I cannot get Tony to respond to any of my messages. It's been about a month and I've left him three or four different messages.