Front Control Arms - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SS Performance · 07-20-2019, 10:31 AM

I'm trying to order Z28 front control arms for my SS. I'm building it as a dedicated track car so I want the best parts I can get for the suspension.

I ordered part numbers 23105014, 23105015, 23105018, & 21305019.

According to the casting numbers on the control arms it appears I got 92236898, 92236899, 20951300, & 20951301. The bushings on these have spaces in the bushings, I assume to soften the ride.

Can anyone tell me, or post a picture, if the Z28 control arms have the spaces?

My understanding is the only difference between the SS & Z28 control arms is the bushings.

I just want make sure I'm getting the correct parts before a raise a ruckus with Rock Auto.

Thanks Craig

olblue75 · 07-21-2019, 03:52 AM

The lower control arm should have a white/tan insert in the bushings so you shouldn't see a void but the radius arm shouldn't have anything if I remember correctly.

SS Performance · 08-05-2019, 06:07 PM

I want to thank everyone that helped me out.

I think they are the Z28 control arms. It was a bit confusing the Z28 forward arms have a whitish center piece. The arms that cam off the car had similar color center pieces. The difference was the hardness.

Thanks again.
Craig

07-20-2019, 10:31 AM	#1
SS Performance Drives: 02 Camaro B4C Join Date: Nov 2016 Location: Cape May County NJ Posts: 749	Front Control Arms I'm trying to order Z28 front control arms for my SS. I'm building it as a dedicated track car so I want the best parts I can get for the suspension. I ordered part numbers 23105014, 23105015, 23105018, & 21305019. According to the casting numbers on the control arms it appears I got 92236898, 92236899, 20951300, & 20951301. The bushings on these have spaces in the bushings, I assume to soften the ride. Can anyone tell me, or post a picture, if the Z28 control arms have the spaces? My understanding is the only difference between the SS & Z28 control arms is the bushings. I just want make sure I'm getting the correct parts before a raise a ruckus with Rock Auto. Thanks Craig __________________ A man's garage is his castle 1969 Camaro SS 1970 Camaro SS 2002 Camaro B4C 2014 Camaro SS Dedicated Track Car 2015 Camaro 1SS 1LE 2008 HHR SS 1996 Silverado Crew Cab Long Bed Dual Rear Wheel

07-21-2019, 03:52 AM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	The lower control arm should have a white/tan insert in the bushings so you shouldn't see a void but the radius arm shouldn't have anything if I remember correctly. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

08-05-2019, 06:07 PM	#3
SS Performance Drives: 02 Camaro B4C Join Date: Nov 2016 Location: Cape May County NJ Posts: 749	I want to thank everyone that helped me out. I think they are the Z28 control arms. It was a bit confusing the Z28 forward arms have a whitish center piece. The arms that cam off the car had similar color center pieces. The difference was the hardness. Thanks again. Craig __________________ A man's garage is his castle 1969 Camaro SS 1970 Camaro SS 2002 Camaro B4C 2014 Camaro SS Dedicated Track Car 2015 Camaro 1SS 1LE 2008 HHR SS 1996 Silverado Crew Cab Long Bed Dual Rear Wheel