Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro Z/28 Forum - Z/28 Specific Topics


Reply
 
Thread Tools
Old 09-02-2018, 02:05 PM   #1
olblue75


 
olblue75's Avatar
 
Drives: 2010 2SS/RS
Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 4,362
Rotor Dia

Anyone know the rotor dia of Z28 rotors?
I have a set of ZL1 rotors but the rings are almost a inch larger than a ZL1 rotor 14.5 vs a 15 3/8.
Any ideas

CTS-V which I'm currently running and ZL1 are supposed to be the same 14.3'ish.

Also the hats far dated 7 Jun 07.
__________________
Orange Krush II
1LE Front sway bar with DSE Links, Splitter, 3.91 Gears and Axles, 14/15 Heat extractor, shocks and struts, Suede Flat bottom Steering wheel, short throw shifter with the Pegasus rear poly shifter mount, diffuser with dual mode mufflers, ZL1 Rockers, Belly Pan and pedals, Z/28 Intake, Headers, Cats,Toe Rods and UCA Bushings, 1 piece DSS Drive Shaft, C7 Z06 Vented Piston Calipers with CTS-V Rotors, PAFDT Solid Cradle bushing, 32mm JPSS Rear Bar, and Skip Shift eliminator. ASC race spec splitter and wicker. 6th Gen M017 Wheels.
olblue75 is offline   Reply With Quote
Old 09-02-2018, 02:54 PM   #2
Supercup
Life Is Short Enjoy It!
 
Supercup's Avatar
 
Drives: 15 Z/28 #934
Join Date: Sep 2016
Location: S. Cal
Posts: 533
fronts are 394mm x 36mm

rears are 390 mm x 32 mm

Attached is early dealer service bulliten you might find helpful.
Attached Images
File Type: pdf Z_28 SPECIAL BULLETIN.pdf (121.7 KB, 10 views)
File Type: pdf Z28_TrackPREP_Final.pdf (134.6 KB, 8 views)
Supercup is offline   Reply With Quote
Old 09-02-2018, 04:33 PM   #3
olblue75


 
olblue75's Avatar
 
Drives: 2010 2SS/RS
Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 4,362
So 394mm is 15.512 inches very close to the rotors I have, hence while ZL1/CTS-V calipers won't fit. But doesn't explain the hat date.
__________________
Orange Krush II
1LE Front sway bar with DSE Links, Splitter, 3.91 Gears and Axles, 14/15 Heat extractor, shocks and struts, Suede Flat bottom Steering wheel, short throw shifter with the Pegasus rear poly shifter mount, diffuser with dual mode mufflers, ZL1 Rockers, Belly Pan and pedals, Z/28 Intake, Headers, Cats,Toe Rods and UCA Bushings, 1 piece DSS Drive Shaft, C7 Z06 Vented Piston Calipers with CTS-V Rotors, PAFDT Solid Cradle bushing, 32mm JPSS Rear Bar, and Skip Shift eliminator. ASC race spec splitter and wicker. 6th Gen M017 Wheels.
olblue75 is offline   Reply With Quote
Old 09-02-2018, 04:59 PM   #4
Supercup
Life Is Short Enjoy It!
 
Supercup's Avatar
 
Drives: 15 Z/28 #934
Join Date: Sep 2016
Location: S. Cal
Posts: 533
Here are some part numbers from another post - rotors can be obtained for lower prices than posted - that is just OEM part number and full price.

link to post: https://www.camaro5.com/forums/showt...t=brake+rotors

Another thread on brakes; https://www.camaro5.com/forums/showt...t=brake+rotors


Brakes:
Option code VRM
Front brake calipers
Left - 22958658 - $1491.23 (R)
Right - 22958607 - $1491.23 (R)
Pin kit - 19207045 - $87.25

Rear
Left - 22958637 - $974.56 (R)
Right - 22958634 - $974.56 (R)
Pin kit - 19206978 - $51.19
Rotors
Front - 22958646 - $2410.00 (R)
Rear - 22958647 - $2410.00 (R)

Front pads - 22990624 - $571.43
Rear pads - 22990625 - $571.43

Brake cooling ducts
Left - 23480631 - $54.76
Right - 23480632 - $54.76

Caliper takes the same bolt as the ZL1
Supercup is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:37 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.