06-10-2021, 08:54 PM | #1 |
Drives: 2018 1SS 1LE Join Date: Jan 2019
Location: Geogia
Posts: 55
|
2018 ZL1 Tune
Does anyone have a stock tune file they can share? My ZLE is tuned, but I may have Pray do a new tune and he likes a stock file, which I do not have.
Plus, having a stock file would be a nice backup. Thanks in advance, Mickey |
06-10-2021, 09:10 PM | #2 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
You can DL from hp tuners repository
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
06-11-2021, 12:20 AM | #3 |
Drives: 2019 ZL1 Join Date: Mar 2019
Location: NJ
Posts: 1,534
|
I would only load the tune that’s for your car or your asking for trouble. It’s best to goto the dealer and have them reflash it for you.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE
LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90 |
06-11-2021, 09:07 AM | #4 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Brett probably has a dozen stock Zl1 tunes. Stock tunes go by VIN#
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
06-11-2021, 04:38 PM | #5 |
Drives: 2018 1SS 1LE Join Date: Jan 2019
Location: Geogia
Posts: 55
|
Thanks, I appreciate it. Mickey
|
|
|
Post Reply
|
|
|