You are browsing camaro5 
 |
|
07-27-2018, 06:06 PM
|
#1 |
 
|
Anyone have a Frankenstein AWD ZL1?
Just curious if anyone's ever gone down this road with a custom built ZL1 with AWD? With the amount of power my ride makes, grip seems to be my biggest struggle. Ya when I had new super sports it was great, but after about 50% tread life, especially in Oregon it doesn't take much to break it loose. Plus that jolt you get in AWD or even 4WD vehicles with a lot of power feels pretty cool. Wondering if any crazy peeps on here ever attempted that in a build like that Hoonigan mustang.
__________________
2013 Camaro ZL1 M6: Rotofab CAI, JDP ZL-R Rough Idle Cam, Upgraded Valve Springs and Pushrods, Ron Davis Heat Exchanger, Alky Methanol Injection, Rx Catch Can, 87mm VMAX Ported TB, Summit Performance Spark Plug Wires, 10" Lower Pulley, Kooks 1 7/8" Headers with Magnaflow Cats, ID850 Injectors, Johnson 2110R lifters, EBC Slotted Rotors+Hawk Pads, Rotofab SC Coolant Reservoir, 160* Thermostat, Custom Mild to Wild switch, Tune, 1st to 4th bypass. 685 RWHP / 640 RWTQ.
|
|
|
|
07-29-2018, 06:01 AM
|
#2 |
    
Drives: 2012 1SS M6 IOM Join Date: Dec 2012
Location: New Rochelle New York
Posts: 1,428
|
I have yet to see, or hear about any 5th gen Camaro being converted to AWD.
__________________
2012 1SS Camaro LS3 Inferno Orange
Mods: LSA Supercharger, 2.55 Pulley, Custom Boost Cam, ARH LTH 1 7/8, HFC, 3' Magnaflow Exhaust, JLT CAI, Elite CC V2, BO White Stage 2 TB, GM 3.91 Gears, DSS CF Driveshaft, BMR Bushing Kit.... . Tuned by JTM Motorsports 540 Hp 550Tq on 9PSI Axles, Monster Clutch, Hotchkis TVS Track Pack kit.......For 2018. |
|
|
|
|
07-29-2018, 06:08 AM
|
#3 |
|
CamaroFans.com
|
Nope
__________________
 |
|
|
|
|
07-29-2018, 12:37 PM
|
#4 |
|
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,281
|
Completely different platform, but I've been following this since my CTS-V days prior to getting the ZL1. Progress is slow, but dude is making a 2-door awd v1:
https://ls1tech.com/forums/conversio...-insanity.html
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
|
|
|
|
07-29-2018, 01:52 PM
|
#5 | |
 
Drives: 2013 Camaro SS Join Date: Apr 2017
Location: South Florida
Posts: 254
|
__________________
2013 SS M6, TSP Stage 3 231/246 cam kit, TSP Trunion upgrade, Cold Air Inductions CAI, VMAX PTB, TSP 1 7/8 Long tube headers and high flow cats, Corsa Xtreme ZL1 Catback exhaust, Elite E2-X Catch can, Trick Flow Gen-X 255 heads milled 0.025 and valve job, GPI rod mod and ported intake, ID850 injectors,ZL1 fuel pump, Flex sensor and E-85, Mantic 9000 and 1LE 3.91 diff 512rwhp/462rwtq
|
|
|
|
|
|
07-29-2018, 02:59 PM
|
#6 |
     
|
Would love to see one and hope that guy completes that V. Put a 15 inch or 17 inch Conversion on it with some good DRs and let them eat some Pavement.
__________________
'11 IBM 2SS/RS Built and Tuned by Vengeance Racing Vengeance PCM
Vengeance Racing Mast Black Label LS7 Headed 416 ProCharger Stage II D1X Race ,Monster Triple,Alky Control Meth Inj, Forgestar F14 Drag Version and a bunch of other blah blah blah.838/688 at 12lbs Street Friendly  |
|
|
|
|
|
|
|
 |
|
|
