09-06-2014, 11:05 PM | #1 |
Drives: Supercharged 2013 AGM 2SS/RS Join Date: Oct 2013
Location: Los Angeles, CA
Posts: 786
|
Tips for reapplying a decal?
Hi everyone,
I need to reapply my older style 'SS' decal on the trunk lid, since I had to remove it to have some scratches fixed. It's still a bit sticky from the original glue (applied it originally a couple of months ago) but not sure whether that's strong enough to hold it firmly in place again. It's this decal (the black oval, the SS's are already on the oval): http://www.sfxperformance.com/parts/...2A-100032A.htm Thanks for any tips.
__________________
2013 AGM 2SS/RS
SLP TVS2300, Edge CAI, 3" Magnaflow catback, BC Racing BR series coilovers, HRE FF15's (20x10 square) with Michelin Pilot Sport 4S's, GM STB, BMR front and rear sway bars and toe links, Prothane subframe bushings and front control arm inserts, JDP rear upper control arm bushings, Elite Engineering catch can. Tuned by Cunningham Motorsports. 1967 Bolero Red 396 SS/RS Convertible Last edited by HAMBO; 09-07-2014 at 01:17 AM. |
09-07-2014, 02:59 PM | #2 |
Obsessed
Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011
Location: Riverview, FL
Posts: 2,603
|
I would clean off all the old residue, and put new 2 sided 3M tape on it.
(Use alcohol to clean) I doubt the old stuff will hold it very securely. Jim
__________________
2016 Hyper Blue 2SS |
|
|
|
|