FS: 2014 Z/28: White w/AC -- 3,400 miles - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

brt3 · 08-08-2025, 05:32 PM

Carefully driven & maintained with only 3,400 miles. Used at two COTA track days, until debilitating knee injuries resulted in surgeries to replace both of my knees. This has impaired my ability to use & enjoy my Z/28 to the point where I'm selling it.

For reference: the car is white, has the factory A/C, and is currently in Austin. My car is #173 of the 509 cars built in 2014. It is one of the 110 cars built in white with the optional A/C. I also have the original factory build sheet with signatures from the build team, along with a large stash of original articles and literature about the car.

It's currently set up with a Sparco drivers seat and Schroth 4-point harnesses (both sides) that anchor to a Brey-Krause harness bar. The rear seat has been replaced by a parcel shelf, and I have all of the original parts. Unless I find a buyer who wants this setup, I’ll likely return the interior to stock before selling it.

I spent over $30K on additional parts -- including two additional sets of forged Finspeed wheels that were custom-designed with input from Mark Stielow. The car has the stock suspension, but I have a set of Detroit Speed chassis/suspension mods in boxes. These were installed on another Z/28 that I previously owned.

I can deliver the car as is, or put the interior back to OEM status if preferred by the buyer. Asking price: $65,000 for car alone with OEM wheels, or $75K with all of the additional parts. Please DM me if you have any questions!

brt3 · 08-13-2025, 05:18 PM

MISTAKE CORRECTED IN ORIGINAL POSTING: Car has the stock suspension with the only mods being camber adjustment plates. The Detroit Speed parts were on a previous Z/28 and are in boxes, not installed.

brt3 · 08-23-2025, 12:57 PM

SOLD!

08-13-2025, 05:18 PM	#2
brt3 Runs with scissors... Drives: '14 Z/28s SIM/SW Join Date: Jan 2013 Location: Austin, TX Posts: 1,446	MISTAKE CORRECTED IN ORIGINAL POSTING: Car has the stock suspension with the only mods being camber adjustment plates. The Detroit Speed parts were on a previous Z/28 and are in boxes, not installed. __________________

08-23-2025, 12:57 PM	#3
brt3 Runs with scissors... Drives: '14 Z/28s SIM/SW Join Date: Jan 2013 Location: Austin, TX Posts: 1,446	SOLD! __________________

08-08-2025, 05:32 PM	#1
brt3 Runs with scissors... Drives: '14 Z/28s SIM/SW Join Date: Jan 2013 Location: Austin, TX Posts: 1,446	FS: 2014 Z/28: White w/AC -- 3,400 miles Carefully driven & maintained with only 3,400 miles. Used at two COTA track days, until debilitating knee injuries resulted in surgeries to replace both of my knees. This has impaired my ability to use & enjoy my Z/28 to the point where I'm selling it. For reference: the car is white, has the factory A/C, and is currently in Austin. My car is #173 of the 509 cars built in 2014. It is one of the 110 cars built in white with the optional A/C. I also have the original factory build sheet with signatures from the build team, along with a large stash of original articles and literature about the car. It's currently set up with a Sparco drivers seat and Schroth 4-point harnesses (both sides) that anchor to a Brey-Krause harness bar. The rear seat has been replaced by a parcel shelf, and I have all of the original parts. Unless I find a buyer who wants this setup, I’ll likely return the interior to stock before selling it. I spent over $30K on additional parts -- including two additional sets of forged Finspeed wheels that were custom-designed with input from Mark Stielow. The car has the stock suspension, but I have a set of Detroit Speed chassis/suspension mods in boxes. These were installed on another Z/28 that I previously owned. I can deliver the car as is, or put the interior back to OEM status if preferred by the buyer. Asking price: $65,000 for car alone with OEM wheels, or $75K with all of the additional parts. Please DM me if you have any questions! Attached Images __________________ Last edited by brt3; 08-13-2025 at 05:16 PM.