2012 ZL1 GM Front Fascia - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Shurenuff · 11-28-2011, 08:14 PM

Quote:

Originally Posted by ADM PERFORMANCE

Ours showed up friday........

So it installs and lines up with all the panels fine I assume? If so, I guess the comment from GM that the ZL1 fascia "couldn't be installed" on a non-ZL1 is a bunch of BS.

I thought that if there was any issue it would be with the fascia lining up to the hood, as those are the only two unique, ZL1 specific panels as far as I can tell.

The Stig · 11-28-2011, 08:19 PM

Quote:

Originally Posted by ROBBDOGG1986

I didnt take any of the back...BUT I've had my bumper off a few times and it looks identical to the stock up to the bottom of the bumper....there is an extra bottom splitter that has to be installed for it to bolt up underneath

I know, but it would just make me feel better is all.

s1k0 · 11-28-2011, 08:19 PM

Well that's pretty cool, so it does fit it *jump for joy*..

I got part numbers for the Upper Fascia which is the only thing available, Lower Fascia, The support which goes right above the lower fascia, an absorber, light bezels, DRLS, and Fog Lights.

monstertodd · 11-28-2011, 08:22 PM

How is it possible that this was available to order before the ZL1 release? Did this accidentally slip out of the door?

Harley1 · 11-28-2011, 08:28 PM

Im getting one just to piss off Shurenuff, no badges though....

Quote:

Originally Posted by s1k0

I got part numbers for the Upper Fascia which is the only thing available, Lower Fascia, The support which goes right above the lower fascia, an absorber, light bezels, DRLS, and Fog Lights.

PM sent...

Shurenuff · 11-28-2011, 08:31 PM

Quote:

Originally Posted by Harley1

Im getting one just to piss off Shurenuff, no badges though....

PM sent...

2SSRS@Gen5diy · 11-28-2011, 08:32 PM

There are 3 parts out of the 15+ you need, 1 have one on the way any day it will be here, its not to bad, it was less then my SS bumper. LOL

s1k0 · 11-28-2011, 08:38 PM

Quote:

Originally Posted by 2SSRS

There are 3 parts out of the 15+ you need, 1 have one on the way any day it will be here, its not to bad, it was less then my SS bumper. LOL

What parts do you have on the way, the only ones I know are available are the upper fascia and Fog lights.
What are the 15 ones needed for a conversion?

L99CAMA2011 · 11-28-2011, 08:42 PM

Quote:

Originally Posted by ADM PERFORMANCE

Ours showed up friday........

Looks great like Kelloggs cornflakes with the Heritage grill. Personally I knew this would be here soon now my real car can look just like my Avatar,

el ess A · 11-28-2011, 08:47 PM

Quote:

Originally Posted by Shurenuff

So it installs and lines up with all the panels fine I assume? If so, I guess the comment from GM that the ZL1 fascia "couldn't be installed" on a non-ZL1 is a bunch of BS.

I'm amazed Stieger hasn't had a heart attack over this. It'll drive a stake through his heart. He was SO convinced I was the one full of BS and suggested I was calling people liars when I was predicting this piece would bolt up to the fenders- which it does, apparently.

If I'm not too lazy tomorrow, I'll truck on down to the local dealer. He's got part numbers if they're out there to be had. I'll see what I can dig up. It's only parts they'll eventually going to sell anyway. And if dealers can get them already, why the hell is it such a secret?

RUQWIKR · 11-28-2011, 08:52 PM

Quote:

Originally Posted by antivenom

Well, lets just say that I get GM parts early. Some of you know who I am.

Lots of the parts are available already...some are not. If you go into your dealer and they pull them up on the EPC (Electronic Parts Catalog), if they say NOT AVAILABLE YET (or something to that affect), you can't get them. I know some other guys gathering stuff already...

2SSRS@Gen5diy · 11-28-2011, 09:05 PM

You need the bumper absorber that is one part, then on the bumper you need the lower fascia, and the support, and all the hardware for the parts. and you need the L & R extension's.

formare · 11-28-2011, 09:06 PM

Schweeet. I can finally properly fix my bumber after hitting that danm ground hog.

s1k0 · 11-28-2011, 09:14 PM

Yup, got the part numbers but most of them actually only a few are available..

Are you going to hold off your project until you receive the remaining parts?

I got mine on order.

11-28-2011, 08:19 PM	#87
s1k0 Drives: Corvette C6 Join Date: Jun 2011 Location: SoCal San Diego Posts: 1,225 View My Garage	Well that's pretty cool, so it does fit it jump for joy.. I got part numbers for the Upper Fascia which is the only thing available, Lower Fascia, The support which goes right above the lower fascia, an absorber, light bezels, DRLS, and Fog Lights. __________________ ....Oh yeah and A CIA Inc. Sold It..

11-28-2011, 09:06 PM	#97
formare The Milano Drives: 2017 Firefly ShipWorks Join Date: Jun 2010 Location: Chicagoland (Crown Point, IN) Posts: 1,877 View My Garage	Schweeet. I can finally properly fix my bumber after hitting that danm ground hog. __________________ My first Love. She was called "Miss Carriage" (still cry when I think about her) 383, Muncie 4 speed, custom linkage mated to hurst short throw shifter.

11-28-2011, 09:14 PM	#98
s1k0 Drives: Corvette C6 Join Date: Jun 2011 Location: SoCal San Diego Posts: 1,225 View My Garage	Yup, got the part numbers but most of them actually only a few are available.. Are you going to hold off your project until you receive the remaining parts? I got mine on order. __________________ ....Oh yeah and A CIA Inc. Sold It..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shno's House of Z	Number 3	Camaro Z/28 Forum - Z/28 Specific Topics	17976	12-27-2021 12:07 PM
BREAKING: 2012 CAMARO ZL1 - 6.2L LSA Supercharged - 6MT Revealed!	Tran	Camaro ZL1 Forum - ZL1 Specific Topics	756	05-01-2013 06:22 AM
2012 Camaro ZL1 Price Announced at $54,095 MSRP !	TLSTWIN	Camaro ZL1 Forum - ZL1 Specific Topics	735	12-20-2011 08:48 AM
ZL1 Front Fascia on your SS/LT/LS?	King of 2morrow	5th Gen Camaro SS LS LT General Discussions	28	05-10-2011 10:56 PM
R&T: 2012 Chevrolet Camaro ZL1 - First Look	Tran	Camaro ZL1 Forum - ZL1 Specific Topics	86	04-28-2011 12:25 PM

11-28-2011, 08:22 PM	#88
monstertodd Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009 Location: Tega Cay, South Carolina Posts: 4,032 View My Garage	How is it possible that this was available to order before the ZL1 release? Did this accidentally slip out of the door?

11-28-2011, 08:32 PM	#91
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	There are 3 parts out of the 15+ you need, 1 have one on the way any day it will be here, its not to bad, it was less then my SS bumper. LOL

11-28-2011, 09:05 PM	#96
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	You need the bumper absorber that is one part, then on the bumper you need the lower fascia, and the support, and all the hardware for the parts. and you need the L & R extension's.