PFADT - Drop springs & Balance bars (Pics inside) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CRUSHER2SS · 10-02-2009, 04:03 PM

So all I can say is, PFADT RACE ENGINEERING is the only way to go if you want the best ride, handling and look for your 2010 Camaro.

Just installed, the PFADT drop springs, and the Sport Sway bar / balance bar package, front & rear. This is a fantastic feat of engineering. Forget the term sway bar, this car is now balanced to perfection. This car is a whole new car with a whole new ride, I can’t believe the responsiveness and handling.

This new and improved Camaro, with the new PFADT suspension is definitely a point and shoot……then you better hang on. You turn the wheel and the car is there, no roll, no twist, ………can you say freight-train on rails!!! Cornering is absolutely amazing. With the car 1” – 1 ¼ lower the body roll is almost non existent the car sits down and hugs the road like it should. The tires are on the ground and this car sticks, no sliding and you have more rubber to the road. The ride is very impressive and no problem as a DD (daily driver) Fantastic ride!!! Even with it lowered!! I can truly say I am now definitely PFADT and happy. I guess all I need now it your complete poly bushing set, trailing arms, strut tower brace and I’ll be ready for the track…………

To everyone at PFADT Race Engineering I say thank you!!!!

You have out done yourself with the engineering and design of these suspension mods…….. Keep up the good work!!! I’ll be watching and impatiently waiting as you release more products for the 2010 Camaro.

Current mods: Corsa CAT back, ADM CAI, TUNE, PFADT Drop springs, PFADT Sport Balance bars front & Rear.

Michael_Js · 10-02-2009, 04:31 PM

Looks great! Any tips/tricks for the install? Did you do the springs yourself? If so, insights? I'm doing the bars tomorrow - after the Hurst shifter, before the ******** subwoofer

Busy weekend!

Jferrell88 · 10-02-2009, 06:13 PM

looks awesome, i was almost decided on dse, but this looks great too how much?

Mod007 · 10-02-2009, 08:54 PM

Quote:

Originally Posted by Jferrell88

looks awesome, i was almost decided on dse, but this looks great too how much?

I'd say he drop about $1000. The springs are 450 and the sways are 550. It would be cool if they had a group buy and drop the price. But it looks good...

Jferrell88 · 10-02-2009, 09:19 PM

probably a good guess i'd say

Andro · 10-02-2009, 09:56 PM

Looking Good

MARO-KEEN · 10-02-2009, 10:37 PM

Looks great, Can't go wrong with PFADT!

PfadtRacing · 10-06-2009, 11:24 AM

The car looks great!!!

Crowley · 10-06-2009, 11:27 AM

Looking really good !!

Crowley

IPS Brandon · 10-06-2009, 03:27 PM

Quote:

Originally Posted by Mod007

I'd say he drop about $1000. The springs are 450 and the sways are 550. It would be cool if they had a group buy and drop the price. But it looks good...

PM me for a price quote! We have a nice promo for members currently, and I have all parts in-stock

Also the pictures are awesome! It was only a matter of time for the news on these products to start filtering!

-Brandon

Steve1968LS2 · 10-06-2009, 05:06 PM

Quote:

Originally Posted by Michael_Js

Looks great! Any tips/tricks for the install? Did you do the springs yourself? If so, insights? I'm doing the bars tomorrow - after the Hurst shifter, before the ******** subwoofer

Busy weekend!

The springs are cake.. just did it and didn't even need a spring compressor.

The hardest part was getting out the front OEM sway bar.. what a PITA.. ended up just cutting it in half. lol

There will be a story in the January Camaro Performers magazine but feel free to ask any questions.

obe1 · 01-03-2010, 01:22 AM

Quote:

Originally Posted by Steve1968LS2

The springs are cake.. just did it and didn't even need a spring compressor.

The hardest part was getting out the front OEM sway bar.. what a PITA.. ended up just cutting it in half. lol

There will be a story in the January Camaro Performers magazine but feel free to ask any questions.

I just did mine today and agree the springs are easy and the front stock bar is a pain in the ass

My friend and I managed to get it out without cutting it in half but I was only minutes away from grabbing the sawsall!!! The good news is my Pfadt bar was easy to install

PfadtRacing · 01-05-2010, 09:12 AM

Glad to see you guys aren't having any trouble with the installs! Now if the OEM components were just as easy to remove...

10-02-2009, 04:03 PM	#1
CRUSHER2SS Drives: 2010 Camaro 2SS/RS Join Date: Jun 2009 Location: Heading down the Straight & Narrow Posts: 68	PFADT - Drop springs & Balance bars (Pics inside) So all I can say is, PFADT RACE ENGINEERING is the only way to go if you want the best ride, handling and look for your 2010 Camaro. Just installed, the PFADT drop springs, and the Sport Sway bar / balance bar package, front & rear. This is a fantastic feat of engineering. Forget the term sway bar, this car is now balanced to perfection. This car is a whole new car with a whole new ride, I can’t believe the responsiveness and handling. This new and improved Camaro, with the new PFADT suspension is definitely a point and shoot……then you better hang on. You turn the wheel and the car is there, no roll, no twist, ………can you say freight-train on rails!!! Cornering is absolutely amazing. With the car 1” – 1 ¼ lower the body roll is almost non existent the car sits down and hugs the road like it should. The tires are on the ground and this car sticks, no sliding and you have more rubber to the road. The ride is very impressive and no problem as a DD (daily driver) Fantastic ride!!! Even with it lowered!! I can truly say I am now definitely PFADT and happy. I guess all I need now it your complete poly bushing set, trailing arms, strut tower brace and I’ll be ready for the track………… To everyone at PFADT Race Engineering I say thank you!!!! You have out done yourself with the engineering and design of these suspension mods…….. Keep up the good work!!! I’ll be watching and impatiently waiting as you release more products for the 2010 Camaro. Current mods: Corsa CAT back, ADM CAI, TUNE, PFADT Drop springs, PFADT Sport Balance bars front & Rear. Attached Images

10-02-2009, 04:31 PM	#2
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,299 View My Garage	Looks great! Any tips/tricks for the install? Did you do the springs yourself? If so, insights? I'm doing the bars tomorrow - after the Hurst shifter, before the ****** subwoofer Busy weekend! __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ******; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

10-02-2009, 06:13 PM	#3
Jferrell88 Drives: black 2ss/rs Join Date: Oct 2008 Location: Proctorville, OH Posts: 751 View My Garage	looks awesome, i was almost decided on dse, but this looks great too how much? __________________

10-02-2009, 09:19 PM	#5
Jferrell88 Drives: black 2ss/rs Join Date: Oct 2008 Location: Proctorville, OH Posts: 751 View My Garage	probably a good guess i'd say __________________

10-02-2009, 09:56 PM	#6
Andro NOICE!!! ™ Drives: Force Fed 427 Join Date: Jan 2009 Location: GOT BOOST? Posts: 5,214 View My Garage	Looking Good __________________

10-02-2009, 10:37 PM	#7
MARO-KEEN Drives: 2001 Camaro Join Date: Mar 2009 Location: Richmond, Tx Posts: 80	Looks great, Can't go wrong with PFADT!

10-06-2009, 11:24 AM	#8
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	The car looks great!!!

10-06-2009, 11:27 AM	#9
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	Looking really good !! Crowley __________________

01-05-2010, 09:12 AM	#13
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	Glad to see you guys aren't having any trouble with the installs! Now if the OEM components were just as easy to remove...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car Show Pics. Very Rare Stuff Inside	joelster	General Automotive + Other Cars Discussion	11	06-15-2009 12:46 AM
FOR SALE 04 Colorado Ext. Cab ZQ8 $9999 w/mods (Pics inside)	zq8colorado04	Autos For Sale / Wanted	1	05-28-2009 10:59 PM
IOM SS Camaro at Sport Chevrolet (PICS INSIDE)!	ezleeinfamous	USA - Mid-Atlantic	53	05-11-2009 06:15 AM
Who has Camaro pajamas? That's right...I do (pics inside)	zq8colorado04	Camaro Photos \| Spyshots \| Video \| Media Gallery	21	05-08-2009 06:50 PM
2010 Mustang Revealed!!!!	darthknight72	General Automotive + Other Cars Discussion	365	12-03-2008 09:09 PM