Just Received The RX Ported Intake Manifold!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jmiller · 02-09-2012, 06:59 PM

Hey guys,

I just received the the RX Ported intake manifold from Tracy. Sorry no pictures yet, the manifold is at my work getting a bath in the sonic. Will post pictures before the install. I am also going to install Mace's 12mm insulator this saturday. Just wondering if you guys have any tips for me on the install,for example like specialty tools i should use, things along those lines. Thanks in advance.

LIM3 · 02-09-2012, 07:01 PM

i cant wait for your car to get on the dyno. i want to see what your pushing rwhp.

Jmiller · 02-09-2012, 07:06 PM

Next Week I will be on the dyno. I can't wait either.

bmorecam · 02-09-2012, 07:06 PM

its a breeze to install the insulator and replace the manifold. when I did my insulator I didn't use the gasket maker as it can possibly leak and it take time to cure, not to mention, how messy it can get. using stock gasket on each side is much easier. The rear manifold bolt can be a PITA, but doable. make sure you get some before after dyno numbers and good luck!

Jmiller · 02-09-2012, 07:12 PM

I bought new gaskets already, because i heard gasket maker would make a mess and take some time to cure. I would like to do a before and after dyno, but i do not have the money to do two seperate dyno runs. Tracy was also saying i should port match the cyclinder head runners to get the best result. Does anybody know how hard that would be. He told me to call if i need help.

bcperry · 02-09-2012, 07:16 PM

I had no idea that they were already selling the IM's. Sweet.

Jmiller · 02-09-2012, 07:17 PM

Quote:

Originally Posted by bcperry

I had no idea that they were already selling the IM's. Sweet.

Just call tracy and say you want to order one, and he will take care of you.

rtcat600man · 02-09-2012, 07:20 PM

AWESOME. Can't wait to hear what kind of numbers you are turning.

Jmiller · 02-09-2012, 07:23 PM

Quote:

Originally Posted by rtcat600man

AWESOME. Can't wait to hear what kind of numbers you are turning.

Hopefully close to 300 RWHP. I will be using a Dynocom.

gjarzabek009 · 02-09-2012, 07:25 PM

nice, my ported intake manifold will be shipping next week

LIM3 · 02-09-2012, 07:29 PM

shoot , with everyting you got, you better make that much. your build on performance is awesome.

you should trade some parts out to carbon fiber or shed some weight off to make that puppy fly

bcperry · 02-09-2012, 07:40 PM

Quote:

Originally Posted by Jmiller

Just call tracy and say you want to order one, and he will take care of you.

Would you mind PMing me what the price is? I don't want to tease tracy when I can't talk the wife into letting me spend the money. lol

LIM3 · 02-09-2012, 07:47 PM

pm me to please

MagnumForceGB · 02-09-2012, 07:48 PM

Where do you get the new gaskets for the intake?

02-09-2012, 06:59 PM	#1
Jmiller Drives: 2013 Camaro 2SS 1LE Join Date: Jan 2011 Location: Moreno Valley, CA Posts: 260	Just Received The RX Ported Intake Manifold!! Hey guys, I just received the the RX Ported intake manifold from Tracy. Sorry no pictures yet, the manifold is at my work getting a bath in the sonic. Will post pictures before the install. I am also going to install Mace's 12mm insulator this saturday. Just wondering if you guys have any tips for me on the install,for example like specialty tools i should use, things along those lines. Thanks in advance. __________________ ADM LSA Supercharger Conversion, ADM air intake ,Stainless power 1 7/8 long tubes w/hi-flow cats, Chunnningham Motorsports stage 2 cam and custom Dyno tune from Starkweather Performance. 624 RWHP, 524 RWTQ

02-09-2012, 07:01 PM	#2
LIM3 it's mind bottling.. Drives: SGM Join Date: Apr 2011 Location: miami floirda. Posts: 5,393	i cant wait for your car to get on the dyno. i want to see what your pushing rwhp. __________________

02-09-2012, 07:06 PM	#3
Jmiller Drives: 2013 Camaro 2SS 1LE Join Date: Jan 2011 Location: Moreno Valley, CA Posts: 260	Next Week I will be on the dyno. I can't wait either. __________________ ADM LSA Supercharger Conversion, ADM air intake ,Stainless power 1 7/8 long tubes w/hi-flow cats, Chunnningham Motorsports stage 2 cam and custom Dyno tune from Starkweather Performance. 624 RWHP, 524 RWTQ

02-09-2012, 07:12 PM	#5
Jmiller Drives: 2013 Camaro 2SS 1LE Join Date: Jan 2011 Location: Moreno Valley, CA Posts: 260	I bought new gaskets already, because i heard gasket maker would make a mess and take some time to cure. I would like to do a before and after dyno, but i do not have the money to do two seperate dyno runs. Tracy was also saying i should port match the cyclinder head runners to get the best result. Does anybody know how hard that would be. He told me to call if i need help. __________________ ADM LSA Supercharger Conversion, ADM air intake ,Stainless power 1 7/8 long tubes w/hi-flow cats, Chunnningham Motorsports stage 2 cam and custom Dyno tune from Starkweather Performance. 624 RWHP, 524 RWTQ

02-09-2012, 07:16 PM	#6
bcperry Engineer in Training Drives: IBM 2010 Camaro LS Join Date: Nov 2011 Location: Alabama Posts: 292	I had no idea that they were already selling the IM's. Sweet. __________________ K&N Aircharger CAI, BBK LT's, VMAX black ICE, Trifecta tuned

02-09-2012, 07:06 PM	#4
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	its a breeze to install the insulator and replace the manifold. when I did my insulator I didn't use the gasket maker as it can possibly leak and it take time to cure, not to mention, how messy it can get. using stock gasket on each side is much easier. The rear manifold bolt can be a PITA, but doable. make sure you get some before after dyno numbers and good luck!

02-09-2012, 07:20 PM	#8
rtcat600man having FUN now 13.66@101 Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 9,230 View My Garage	AWESOME. Can't wait to hear what kind of numbers you are turning. __________________ MY BUILD

02-09-2012, 07:25 PM	#10
gjarzabek009 Drives: 1LT Join Date: Feb 2010 Location: Chicago Posts: 954	nice, my ported intake manifold will be shipping next week __________________ -21" GM wheels -3.73 gears -Injen PowerFlow CAI -OBX LT headers -Doug Thorley Catback exhaust -Magnaflow High Flow cats -Trifecta Tune -VMAX Ported TB -Maces 25mm Insulator -Ported Intake manifolds (soon)

02-09-2012, 07:29 PM	#11
LIM3 it's mind bottling.. Drives: SGM Join Date: Apr 2011 Location: miami floirda. Posts: 5,393	shoot , with everyting you got, you better make that much. your build on performance is awesome. you should trade some parts out to carbon fiber or shed some weight off to make that puppy fly __________________

02-09-2012, 07:47 PM	#13
LIM3 it's mind bottling.. Drives: SGM Join Date: Apr 2011 Location: miami floirda. Posts: 5,393	pm me to please __________________

02-09-2012, 07:48 PM	#14
MagnumForceGB Drives: Fastest 2010 Camaro V6 Join Date: Apr 2010 Location: Newcastle, OK Posts: 3,571 View My Garage	Where do you get the new gaskets for the intake? __________________ Camaro V6 = 11.268 @ 120.11

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2012 V6 C.A.I. Inc. \| Camaro 3.6L Cold Air Inductions Intake System! \| Plus Packages!	AutoAgenda	V6 Bolt-Ons & Tunes	87	08-25-2013 05:22 PM
anyone install Ported Intake Manifold on a vortech???	GQ4Life	Forced Induction - V8	4	05-02-2010 01:24 PM
Ported intake manifold	antivenom	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	52	10-20-2009 09:50 AM