09-16-2013, 07:05 PM | #1 |
Drives: 2012 Black Camaro 1LT Join Date: Sep 2013
Location: Arkansas
Posts: 226
|
Opinions on price for custom leather job
The dealer recommended a guy that removes the cloth from your seats and replaces it with a custom leather job. For an LT. Quoted $1490, does that sound like a good deal? They will look basically like 2LT leather seats, Im getting solid black, of course.
__________________
|
09-16-2013, 07:15 PM | #2 |
Drives: 2013 silver ice metallic ZL1 Join Date: Jan 2013
Location: Camden County, NJ
Posts: 730
|
If I was you I'd get used OEM leather seats...that way you know they are of good quality and your resale will probably be better. Also they will be cheaper most likely.
|
09-16-2013, 07:24 PM | #3 |
|
It's probably Katzkin... supposedly as high of quality as OEM, but the key is getting a good installation. I've seen some sloppy fitting aftermarket leather, and have seen some great jobs too. I've even seen factory covers installed as a replacement to cloth with lousy, loose fitting results, so I'm sure a good installer is key for a nice, tight fitting, factory appearing job.
__________________
|
09-16-2013, 07:33 PM | #4 |
Drives: 2013 silver ice metallic ZL1 Join Date: Jan 2013
Location: Camden County, NJ
Posts: 730
|
|
09-16-2013, 07:33 PM | #5 |
Teenage Dream Camaro
Drives: A Visually Stunning Camaro Join Date: Feb 2013
Location: Florida
Posts: 1,722
|
|
09-16-2013, 09:23 PM | #6 |
Can sometimes find low mileage used OEM leather seats for about $600 +/-
__________________
2013 Camaro LS |
|
09-16-2013, 10:10 PM | #7 |
Drives: Camaro SS Join Date: Aug 2011
Location: US
Posts: 401
|
I've had aftermarket and oem. Honestly, go aftermarket.
|
09-18-2013, 12:03 PM | #8 |
Drives: Camaro Join Date: Aug 2013
Location: United State
Posts: 19
|
used oem isn't a bad option for the money
|
09-18-2013, 12:15 PM | #9 |
Drives: 2013 Camaro 2SS RS Convt. Join Date: Mar 2011
Location: West MI (Home of the Tulips)
Posts: 961
|
It's too bad your car isn't a convertible. I have black leather take off's from my 2013 Camaro convt. that I'd like to move.
__________________
2013 Nickey Stage II Camaro SS Convertible #10.Black w/ Red leather interior. No Weeds Elec. Diverters, CNC ported heads, custom grind cam, upgraded fuel injectors, ZL-1 fuel pump, V-Max ported TB, Red Magnuson Super Charger with rear cog drive, upgraded rear axles good for 1400Hp, 3:45 gears, Tremec 6 spd., Pedders adj. coil overs, Phadt ZL-spec swaybars, 800Hp at the crank, 670RWHP, 613ft.lbs. torq. @ 11lbs. boost. SOLD!!!
|
09-18-2013, 10:15 PM | #10 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
Iv had this done at a dealership. for that price you get Katzkin with the same leather content as OEM. They will not fit as tight as oem as they are made in bulk. I got a qoute from the dealer and told them I wanted 100% leather and they said they were. I had custom embroidery done on them and when I picked my truck up I saw they were vinyl. the dealer had to replace them with 100% leather embroidery and installation and eat the cost.
these are the 100% leather. Id go to a custom interior or audio store. Thats what the dealer did. The dealer calls a local kazkin dealer and orders them through them then has them come out and install it. I could have had it done a lot cheaper if I had gone right to the place they had do it.
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
09-18-2013, 10:25 PM | #11 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
http://www.ebay.com/itm/2010-2013-CH...948512&vxp=mtr price for instal is usualy $250 -$300
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
09-19-2013, 12:51 AM | #12 |
Account Suspended
Drives: 2011 2SS/RS Join Date: Aug 2012
Location: Ohio
Posts: 972
|
OEM seat aren't 100% leather. Go aftermarket.
|
09-19-2013, 12:59 AM | #13 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
most aftermarket are not 100% either. you have to custom order 100%. this place will do 100% https://www.leatherseats.com/vehicle...earSelect=2012
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
09-19-2013, 07:27 AM | #14 |
Drives: 2011 Camaro SS Join Date: Jul 2013
Location: central Arkansas
Posts: 8
|
I just bought a 2012 maxima with the old lady. The dealer had katskinz installed before they put it on the lot, and it is awesome. I'd prefer it to any factory leather unless you want factory heat.
|
|
|
|
|