New Sequential Tail Lights ! - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rhyder · 09-19-2012, 07:04 PM

Quote:

Originally Posted by JustRaf

http://www.phastekperformance.com/20...turnsignal.htm

Do think this harness is good at least we're not going to replace the whole EOM tail lights. Please share your input.

What is in the harness? is it just a resistor?

jtfire006 · 09-22-2012, 04:47 PM

to each his own! these are not even close to the looks that theTechnostalgia tailights give you! this is a build it yourself mod that will probally fail after some time, and you have to wire in your own resistor. you think you will get a replacement part when these break? you cant even get on the website. go ahead and save yourself some money, and burn up your electrical sytem while you do it! WHY even compare these to Technostalgia, should have just posted this as a do it yourself mod that uses your stock parts.

Nutbutt · 09-24-2012, 08:54 AM

If you are referring to the sweeplites they come with the ballast resistor for the camaro application. I didn't want a show mode or replace the oem housings. I have checked the electrical I/F out and it matches a incandescent bulb. Frying my electrical system is just as likely as replacing the whole housing like the techno.
If you have seen the Sweeplite LED inserts, they are not cheaply made. Just because they are on ebay doesn't make them any worse a vendor.

FRANK121 · 09-24-2012, 11:50 AM

I just installed the plug and play wiring harness from phasetech and they work great! My only problem is, I cannot tell if they are snapping into place when I try to turn the bulb holder into place on the lens? I'm afraid they may vibrate loose?

Tipper69 · 09-24-2012, 12:35 PM

^ exactly what i have. Basically all you need. Ive had mibe for a while and have even been rear ended with um. They were still workingvand nothing vibrated loose XD

FRANK121 · 09-24-2012, 12:40 PM

Were yours hard to turn to get them to snap in place? Mine go in the tail light and only turn maybe 1/8" if that? They never feel like they snap in place and I don't want to keep forcing and break something?

Tipper69 · 09-24-2012, 03:56 PM

Talkn about putting the bulb back in with the harness? If so yes. It seemed like it didnt turn back all the way but it must be snug as a bug cuz me being rear ended, it didnt even loosen mine from the tail lights. So after that im not worried about it and they still work

FRANK121 · 09-24-2012, 04:01 PM

Yes, bulb goes into socket, socket goes into tail light, turn to lock in place and it barely moves and never gives an indication that its locked in place?

So far mine hasn't come loose either

So I guess I won't worry about it?

They look awesome working!

Tipper69 · 09-24-2012, 04:06 PM

I like how they go in sequence as soon ass you unlock/ lock the car and every time you turn it on. Its simple cheap and looks great.

Blues45th · 11-25-2012, 09:01 PM

Where do I find these. Can't find them on eBay for camaro or anywhere there page said under construction.

09-24-2012, 08:54 AM	#45
Nutbutt Drives: 2011 RJT 2LT/RS Convertible Join Date: Nov 2009 Location: Western Massachusetts Posts: 3,381 View My Garage	If you are referring to the sweeplites they come with the ballast resistor for the camaro application. I didn't want a show mode or replace the oem housings. I have checked the electrical I/F out and it matches a incandescent bulb. Frying my electrical system is just as likely as replacing the whole housing like the techno. If you have seen the Sweeplite LED inserts, they are not cheaply made. Just because they are on ebay doesn't make them any worse a vendor. __________________ 1st IPF Supercharged 2011 2LT/RS RJT Convertible

09-24-2012, 11:50 AM	#46
FRANK121 Drives: 2022 Camaro ZL1 Join Date: Sep 2010 Location: Sullivan, Missouri Posts: 653 View My Garage	I just installed the plug and play wiring harness from phasetech and they work great! My only problem is, I cannot tell if they are snapping into place when I try to turn the bulb holder into place on the lens? I'm afraid they may vibrate loose? __________________ 2022 Black ZL1 RotoFab CAI, AWE Touring Edition Cat Back Exhaust. 665 Crank hp. est. and 660 Crank ft. lbs. est. Never been Dynoed

09-24-2012, 12:35 PM	#47
Tipper69 ICE Member Drives: 2011 Camaro RS M6 Join Date: Mar 2012 Location: Tama,IA Posts: 265 View My Garage	^ exactly what i have. Basically all you need. Ive had mibe for a while and have even been rear ended with um. They were still workingvand nothing vibrated loose XD __________________ Keep your eyes open.

09-24-2012, 12:40 PM	#48
FRANK121 Drives: 2022 Camaro ZL1 Join Date: Sep 2010 Location: Sullivan, Missouri Posts: 653 View My Garage	Were yours hard to turn to get them to snap in place? Mine go in the tail light and only turn maybe 1/8" if that? They never feel like they snap in place and I don't want to keep forcing and break something? __________________ 2022 Black ZL1 RotoFab CAI, AWE Touring Edition Cat Back Exhaust. 665 Crank hp. est. and 660 Crank ft. lbs. est. Never been Dynoed

09-24-2012, 03:56 PM	#49
Tipper69 ICE Member Drives: 2011 Camaro RS M6 Join Date: Mar 2012 Location: Tama,IA Posts: 265 View My Garage	Talkn about putting the bulb back in with the harness? If so yes. It seemed like it didnt turn back all the way but it must be snug as a bug cuz me being rear ended, it didnt even loosen mine from the tail lights. So after that im not worried about it and they still work __________________ Keep your eyes open.

09-22-2012, 04:47 PM	#44
jtfire006 Drives: 2011 v-6 vert Join Date: Jan 2012 Location: biloxi, ms Posts: 141	to each his own! these are not even close to the looks that theTechnostalgia tailights give you! this is a build it yourself mod that will probally fail after some time, and you have to wire in your own resistor. you think you will get a replacement part when these break? you cant even get on the website. go ahead and save yourself some money, and burn up your electrical sytem while you do it! WHY even compare these to Technostalgia, should have just posted this as a do it yourself mod that uses your stock parts.

09-24-2012, 04:01 PM	#50
FRANK121 Drives: 2022 Camaro ZL1 Join Date: Sep 2010 Location: Sullivan, Missouri Posts: 653 View My Garage	Yes, bulb goes into socket, socket goes into tail light, turn to lock in place and it barely moves and never gives an indication that its locked in place? So far mine hasn't come loose either So I guess I won't worry about it? They look awesome working! __________________ 2022 Black ZL1 RotoFab CAI, AWE Touring Edition Cat Back Exhaust. 665 Crank hp. est. and 660 Crank ft. lbs. est. Never been Dynoed

09-24-2012, 04:06 PM	#51
Tipper69 ICE Member Drives: 2011 Camaro RS M6 Join Date: Mar 2012 Location: Tama,IA Posts: 265 View My Garage	I like how they go in sequence as soon ass you unlock/ lock the car and every time you turn it on. Its simple cheap and looks great. __________________ Keep your eyes open.

11-25-2012, 09:01 PM	#52
Blues45th ......................... Drives: 45th anniversary edition v6 3.6L Join Date: Sep 2012 Location: Dunedin, Florida Posts: 920 View My Garage	Where do I find these. Can't find them on eBay for camaro or anywhere there page said under construction.