GPI max build under way - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

gunchamp · 05-02-2021, 05:41 PM

Will be mounting the box in the spare tire area once I get it set up

gunchamp · 05-02-2021, 05:43 PM

Ted sent me my first tune. I had to do some research to get a little more familiar with hp tuners, but I should be good to go. Next step is to get that initial tune loaded so I can start the old girl up and start sending data logs to Ted. Hopefully will be able to get that accomplished in the next couple days, if work schedule allows it

gunchamp · 05-15-2021, 08:21 PM

Ok guys, little update. Im on tune #5 from Ted and this bitch is starting to roll. Getting a little scary haha. Will be hitting a dyno at some point this summer so i can get some numbers nailed. I ran it to 6800 rpms today and saw a touch over 10#s of boost. It does NOT quit pulling. Traction is zero in 1st, 2nd and 3rd. Have to air down the mickeys a bit and just purchased bmr toe rods and trailing arms. Shes a nasty beast!! Will share some drive by videos in the near future. Thanks for everyones input and following along!

Bigdumogre · 05-15-2021, 08:44 PM

Quote:

Originally Posted by gunchamp

Ok guys, little update. Im on tune #5 from Ted and this bitch is starting to roll. Getting a little scary haha. Will be hitting a dyno at some point this summer so i can get some numbers nailed. I ran it to 6800 rpms today and saw a touch over 10#s of boost. It does NOT quit pulling. Traction is zero in 1st, 2nd and 3rd. Have to air down the mickeys a bit and just purchased bmr toe rods and trailing arms. Shes a nasty beast!! Will share some drive by videos in the near future. Thanks for everyones input and following along!

Sounds like a fun time lol

Ashen 6.2 · 05-15-2021, 09:23 PM

Awesome to hear! Congrats!

Chris49066SS · 05-15-2021, 09:33 PM

Quote:

Originally Posted by gunchamp

Ok guys, little update. Im on tune #5 from Ted and this bitch is starting to roll. Getting a little scary haha. Will be hitting a dyno at some point this summer so i can get some numbers nailed. I ran it to 6800 rpms today and saw a touch over 10#s of boost. It does NOT quit pulling. Traction is zero in 1st, 2nd and 3rd. Have to air down the mickeys a bit and just purchased bmr toe rods and trailing arms. Shes a nasty beast!! Will share some drive by videos in the near future. Thanks for everyones input and following along!

You need some weight reduction and when you pull the front wheels on the launch, that should help with some more weight on the rear tires! Get it!

LCPLPunk · 05-15-2021, 10:21 PM

gunchamp, have you upgraded rear subframe bushings yet?

1JEWLDSSRS · 05-16-2021, 07:07 AM

Sounds awesome bro!!! Rock on and have fun!!

Roader · 05-16-2021, 09:05 AM

Glad your enjoying it and having fun. The world has been to negative the past year

gunchamp · 05-16-2021, 11:26 AM

Quote:

Originally Posted by LCPLPunk

gunchamp, have you upgraded rear subframe bushings yet?

Yup, did polys

gunchamp · 05-16-2021, 11:27 AM

Quote:

Originally Posted by Chris49066SS

You need some weight reduction and when you pull the front wheels on the launch, that should help with some more weight on the rear tires! Get it!

Yes, cutting out some more weight would be awesome. Will start attacking that here soon. Wheels in the aor would make my year haha!

gunchamp · 05-16-2021, 11:27 AM

Quote:

Originally Posted by 1JEWLDSSRS

Sounds awesome bro!!! Rock on and have fun!!

Thank you my friend!!

gunchamp · 05-16-2021, 11:28 AM

Thanks to all you guys!

joshnmn · 05-16-2021, 06:14 PM

Sounds awesome. Can’t wait to see it rolling

05-02-2021, 05:41 PM	#141
gunchamp Drives: 15 Camaro SS Join Date: Oct 2018 Location: Mountains of central PA Posts: 1,442	Will be mounting the box in the spare tire area once I get it set up __________________ 15 Camaro SS- GPI max top end, ESS Vortech V3 9psi, ID 1050s, ZL1 pump, JMS bap, Long tubes, Corsa extreme, Circle D pro 5C, 391 rear, DSS carbon drive shaft, poly cradle bushings, tuned by Ted Jannetty and much much more

05-02-2021, 05:43 PM	#142
gunchamp Drives: 15 Camaro SS Join Date: Oct 2018 Location: Mountains of central PA Posts: 1,442	Ted sent me my first tune. I had to do some research to get a little more familiar with hp tuners, but I should be good to go. Next step is to get that initial tune loaded so I can start the old girl up and start sending data logs to Ted. Hopefully will be able to get that accomplished in the next couple days, if work schedule allows it __________________ 15 Camaro SS- GPI max top end, ESS Vortech V3 9psi, ID 1050s, ZL1 pump, JMS bap, Long tubes, Corsa extreme, Circle D pro 5C, 391 rear, DSS carbon drive shaft, poly cradle bushings, tuned by Ted Jannetty and much much more

05-15-2021, 08:21 PM	#143
gunchamp Drives: 15 Camaro SS Join Date: Oct 2018 Location: Mountains of central PA Posts: 1,442	Ok guys, little update. Im on tune #5 from Ted and this bitch is starting to roll. Getting a little scary haha. Will be hitting a dyno at some point this summer so i can get some numbers nailed. I ran it to 6800 rpms today and saw a touch over 10#s of boost. It does NOT quit pulling. Traction is zero in 1st, 2nd and 3rd. Have to air down the mickeys a bit and just purchased bmr toe rods and trailing arms. Shes a nasty beast!! Will share some drive by videos in the near future. Thanks for everyones input and following along! __________________ 15 Camaro SS- GPI max top end, ESS Vortech V3 9psi, ID 1050s, ZL1 pump, JMS bap, Long tubes, Corsa extreme, Circle D pro 5C, 391 rear, DSS carbon drive shaft, poly cradle bushings, tuned by Ted Jannetty and much much more

05-15-2021, 09:23 PM	#145
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 1,998 View My Garage	Awesome to hear! Congrats! __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP

05-15-2021, 10:21 PM	#147
LCPLPunk USA-1 Drives: 2010 Camaro SS L99 Join Date: Jul 2016 Location: Near DC Posts: 1,893 View My Garage	gunchamp, have you upgraded rear subframe bushings yet? __________________ "A Camaro in the garage is safe, but that's not what Camaros are built for..." R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete

05-16-2021, 07:07 AM	#148
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,435	Sounds awesome bro!!! Rock on and have fun!! __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

05-16-2021, 09:05 AM	#149
Roader Drives: Camaro Join Date: Oct 2018 Location: Alabama Posts: 673	Glad your enjoying it and having fun. The world has been to negative the past year

05-16-2021, 11:28 AM	#153
gunchamp Drives: 15 Camaro SS Join Date: Oct 2018 Location: Mountains of central PA Posts: 1,442	Thanks to all you guys! __________________ 15 Camaro SS- GPI max top end, ESS Vortech V3 9psi, ID 1050s, ZL1 pump, JMS bap, Long tubes, Corsa extreme, Circle D pro 5C, 391 rear, DSS carbon drive shaft, poly cradle bushings, tuned by Ted Jannetty and much much more

05-16-2021, 06:14 PM	#154
joshnmn 2&THEHIT Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018 Location: Garner, NC Posts: 1,013 View My Garage	Sounds awesome. Can’t wait to see it rolling