07-01-2013, 04:18 AM | #2185 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
He he...Yeah, the cavalier has been paid off for a long time. Gets too much mpg and wasn't worth trading in. Even top dollar would only be about 4k, so the camaro is only for fun.
This leave is only vacation. When I get back I get to start looking at orders. Hoping something good will pop, I've been looking the last few months just to see, and if I had to start then I'd likely be going overseas (like Japan or Bahrain). |
07-01-2013, 05:15 PM | #2186 |
Airborne Recondo
Drives: Crystal Red 2SS 1LE Join Date: Apr 2012
Location: Fairfax Station Va.
Posts: 864
|
I just hit 5K over the weekend, of course I use my Chevy work van on a daily basis. I will be doing a cam soon. Naturally headers will be part of the package. I'm hoping Tram will dyno his car with the new headers.
|
07-01-2013, 11:14 PM | #2187 |
Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012
Location: Bay Area, online, & in my 1LE
Posts: 2,667
|
What cam? Other parts to ensure longevity?
__________________
|
07-01-2013, 11:30 PM | #2188 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
|
07-02-2013, 04:04 AM | #2189 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
i'm also interested in what cam i've been looking into a bunch, but still not sure i understand the specs, so i wind up just looking for sound clips lol
|
07-02-2013, 03:05 PM | #2190 |
Airborne Recondo
Drives: Crystal Red 2SS 1LE Join Date: Apr 2012
Location: Fairfax Station Va.
Posts: 864
|
Still not sure what cam. Was initially leaning towards the LS7 cam and heads kit, but with only a 40hp bump, not quite sure. I am still open to suggestions. I do know that with headers, we should gain considerably (as Tram can testify) I don't need a monster engine, maybe 60-70 hp would be great.
|
07-02-2013, 03:23 PM | #2191 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
A LOT of people like the night fury cam by Lethal.
|
07-02-2013, 03:28 PM | #2192 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
That's one I was looking at hard, just because there's a lot more info/testimonials available...
I'm excited about these pfadt headers, hopefully I'll be able to get them installed and get dynoed before I go back to work in a few weeks |
07-02-2013, 06:03 PM | #2193 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
07-02-2013, 06:57 PM | #2194 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
Well that didn't take long... thanks, Pete!
Sent from my DROID RAZR using Tapatalk 2 |
07-02-2013, 07:33 PM | #2195 |
Airborne Recondo
Drives: Crystal Red 2SS 1LE Join Date: Apr 2012
Location: Fairfax Station Va.
Posts: 864
|
That car sounds awesome. You can really hear the cam through the exhaust. Thanks Tram.
|
07-02-2013, 07:51 PM | #2196 |
|
.........yeah, that sounded awesome!!!!!!!
|
07-03-2013, 07:59 PM | #2197 |
Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012
Location: Bay Area, online, & in my 1LE
Posts: 2,667
|
Now that's a sweet sounding cam!
|
07-05-2013, 10:54 PM | #2198 |
Drives: 2021 1LE Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,315
|
drive by sound clip... dynatech headers, high flow cats, npp
|
|
|
Thread Tools | |
|
|