heads and intake manifold upgrade - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Chris49066SS · 12-09-2018, 11:41 AM

I bet you could at least get 11.5 without too much more effort! Now we gotta wait till Spring to get back out to Beech Bend

Quote:

Originally Posted by WHAMMO

Look at my Goertz1 intake!! Thats my intake manifold upgrade. No numbers yet, but it pulls easily to 7100. My stock rod modded/ported TB drops like and anchor at 6500 but the tq/hp is really strong at 5200.

"You're lucky that 100 shot of NOS didn't blow the welds on the intake!" -Vin Diesel

Thats a nice looking intake though, Whammo!

sixty9fordkiller · 12-11-2018, 12:59 AM

if you're going with aftermarket heads, get a good cam and take advantage of the sub 15 degree valve angles

12-11-2018, 12:59 AM	#30
sixty9fordkiller Donkey Dick Cam Camaro Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009 Location: Los Angeles, CA Posts: 2,000	if you're going with aftermarket heads, get a good cam and take advantage of the sub 15 degree valve angles __________________ Bone Stock