You are browsing camaro6 
|
||
|
Post Reply
|
|
|
Thread Tools |
01-19-2021, 09:44 AM
|
#1 |
  
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Struts ground, getting ready for the spring with 1LE spec Apex wheels
For the folk that have ground their struts down, does this look typical? I test fit a wheel on and there is a few mm of gap.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
|
|
01-19-2021, 04:00 PM
|
#2 |
|
Drives: 2019 ZL1 1LE Join Date: Feb 2017
Location: Gilbert, AZ
Posts: 648
|
Yea that's what it looked like on mine with OEM 1LE wheels
__________________
Old: 2017 SS 1LE
Old: 2017 ZL1 Current: 2019 ZL1 1LE |
|
|
|
|
01-19-2021, 05:47 PM
|
#3 |
|
TWG1
Drives: 2019 Camaro ZLE Join Date: Nov 2019
Location: PENSACOLA, FL
Posts: 179
|
Looks about right. You don’t have to load suspension to check clearance. I found jacking it up and getting underneath from slightly behind the center of the wheel looking forward and up provided best view.
__________________
2019 ZLE M6
2019 ZL1 A10 (Sold) 1967 Jaguar XKE Series 1 Roadster 2021 F150 Powerboost (on order) |
|
|
|
|
01-19-2021, 07:31 PM
|
#4 |
|
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
if you have pictures I'd like to compare. I went taller than needed definitely but not sure about depth, I bought the first 1/2 or so down to the same depth as the top was.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
