What Did You Do To Your Camaro Today? - Page 1575 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

fhrex · 04-01-2019, 04:52 AM

R&R intake manifold, replaced coolant outlet seals.

Panda1LE · 04-01-2019, 09:25 AM

oil change, Mobil 1 oil and Wix filter....also used some leftover matte black wrap to do the chevy emblem on the steering wheel

paulsandhu · 04-01-2019, 11:14 AM

after nearly 10 years I finally did a performance upgrade, installed a K&N Blackhawk cold air intake!

BLU DUCE · 04-01-2019, 12:06 PM

Quote:

Originally Posted by paulsandhu

after nearly 10 years I finally did a performance upgrade, installed a K&N Blackhawk cold air intake!

Whats was the matter the motor have a bad case of asthma and need a new breathing tube.

Sinister10 · 04-01-2019, 12:39 PM

installed the front wheels and tires..waiting for the rears to arrive..

will get better pics once the rears are on and i get it cleaned up.

Cheap Guy · 04-01-2019, 12:55 PM

Quote:

Originally Posted by Sinister10

installed the front wheels and tires..waiting for the rears to arrive..

will get better pics once the rears are on and i get it cleaned up.

Very tastefully done car! I think the compete black wheel thing is too trendy - the chrome/black wheels are classic. The Heritage grilles are apparently non-existent nowadays so the ZL1 grille is the best way to go now. I would probably add clear marker lamps - the orange just jumps out at you - and your car would be perfect!

Sinister10 · 04-01-2019, 01:20 PM

Quote:

Originally Posted by Cheap Guy

Very tastefully done car! I think the compete black wheel thing is too trendy - the chrome/black wheels are classic. The Heritage grilles are apparently non-existent nowadays so the ZL1 grille is the best way to go now. I would probably add clear marker lamps - the orange just jumps out at you - and your car would be perfect!

Thanks! i was on the fence for a LONG time with the black wheels, never have been a fan, but fell in love with these. agree with the marker lens, i was planning to go with black.

mbesman · 04-01-2019, 01:59 PM

New headlights...a little struggle to put on and had to modify the headlight wire but they look awesome!

ZZZTOPZZZ · 04-02-2019, 02:42 PM

Dropped her off at the shop this afternoon for the Comp Cam install and the port job on the heads. Hope to have it back late next week if all goes well. Failed to get the tech data on the cam.

Deputy347k9 · 04-02-2019, 03:20 PM

In the past week two weeks I have installed all new factory 21" wheels with Pirelli P Zero tires (this time a square setup), changed the oil/filter (Royal Purple) and now she sits in the garage being detailed from top to bottom. Coastal NC is getting heavy winds and rain as I type so I am using the wife's car! At times I just go out into the garage so I can sit in the Camaro, it's a love thing!

15RS2NV · 04-02-2019, 08:51 PM

Still polishing away on the cam covers.

JLBIII · 04-02-2019, 10:21 PM

Had resonators removed and exhaust cut-outs installed. Neighbors are going to love it!

BSR-1 · 04-03-2019, 05:31 AM

Quote:

Originally Posted by 15RS2NV

Still polishing away on the cam covers.

Did I miss the pics?

awsm66 · 04-03-2019, 12:08 PM

Put my CF trunk and CF spoiler on.

I also have a CF roof. My plans are to get the LS1 stripe kit (already ordered) and use it as a stencil, paint the parts red and remove the stencil and clear over all of it so the stripe will be CF. I have seen a couple others with CF stripes and I like it so I am excited to see how it turns out. since the hood insert is CF I really think it will look good with a real CF ZL1 stripe from front to back.

I kept waiting for an Anderson composite trunk but they still have no time frame of when they will make it again so I went with a VIS. the finish on it is excellent but the fit is not exact. It is close but not perfect. really the only problem is around the tail light. The left side is perfect but the right side is slightly off. I can build it up and make it right since I am painting that part anyway but it would have been nice not to have to fool with it.

04-01-2019, 04:52 AM	#22037
fhrex Drives: 2011 Camaro 2LT/RS Join Date: May 2015 Location: Farmville, Virginia Posts: 1,023 View My Garage	R&R intake manifold, replaced coolant outlet seals. __________________

04-01-2019, 09:25 AM	#22038
Panda1LE Drives: 2013 2SS/RS 1LE (6spd) Join Date: Mar 2018 Location: Temecula, CA Posts: 281	oil change, Mobil 1 oil and Wix filter....also used some leftover matte black wrap to do the chevy emblem on the steering wheel __________________ CAI intake, Stainless Power LTH, SCT X4, NPP exhaust

04-01-2019, 11:14 AM	#22039
paulsandhu Drives: 2010 Camaro 2SS/RS Join Date: Apr 2009 Location: Surrey, BC Posts: 455 View My Garage	after nearly 10 years I finally did a performance upgrade, installed a K&N Blackhawk cold air intake! __________________ GHOST · 2SSRS Order Date: March 28, 2009 // DoB: June 19, 2009 // Arrival Date: July 2, 2009 Current Modifications: Hurst Comp HardDrive Stick Kit K&N Blackhawk CAI Anvil Carbon Fiber Notch Spoiler Ceramic Coated Satin Black Wrap

04-01-2019, 12:39 PM	#22041
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 543	installed the front wheels and tires..waiting for the rears to arrive.. will get better pics once the rears are on and i get it cleaned up. Attached Images __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.

04-01-2019, 01:59 PM	#22044
mbesman Great White Drives: 2015 Camaro 2SS Join Date: Jan 2017 Location: Florida Posts: 251 View My Garage	Put these bad boys on New headlights...a little struggle to put on and had to modify the headlight wire but they look awesome! Attached Images __________________ [

04-02-2019, 02:42 PM	#22045
ZZZTOPZZZ Drives: 2013 L99 2SS Vert Join Date: May 2016 Location: SE Michigan Posts: 100	Dropped her off at the shop this afternoon for the Comp Cam install and the port job on the heads. Hope to have it back late next week if all goes well. Failed to get the tech data on the cam. __________________ ProCharger Stage II - Stainless Works Headers - Long Pipes & Cats - ZL1 Fuel Pump - Cam On The Way Next Spring

04-02-2019, 03:20 PM	#22046
Deputy347k9 Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017 Location: Havelock, NC Posts: 1,328	In the past week two weeks I have installed all new factory 21" wheels with Pirelli P Zero tires (this time a square setup), changed the oil/filter (Royal Purple) and now she sits in the garage being detailed from top to bottom. Coastal NC is getting heavy winds and rain as I type so I am using the wife's car! At times I just go out into the garage so I can sit in the Camaro, it's a love thing! __________________

04-02-2019, 08:51 PM	#22047
15RS2NV Ponies are for girls Drives: 2015 RS LFX Red Hot A6 Join Date: Sep 2018 Location: Southern AZ Posts: 315 View My Garage	Still polishing away on the cam covers. __________________ H&R 1.8/1.7” drop, Overkill 80mm + intake ported by AFS, 1" insulator MACE, Accel Super Coils, THR cai, JET MAF sensor, Hurst shifter handle, GPP strut tower brace, CI ice cube tray hood vents (functional) @SemperFiCamaro

04-02-2019, 10:21 PM	#22048
JLBIII Drives: 2010 RJT 2SS Join Date: Dec 2009 Location: SE Penn. Posts: 175	Had resonators removed and exhaust cut-outs installed. Neighbors are going to love it!

04-03-2019, 12:08 PM	#22050
awsm66 Drives: Victory Red 2011 2SS Join Date: Dec 2016 Location: Meridian, MS Posts: 79	Put my CF trunk and CF spoiler on. I also have a CF roof. My plans are to get the LS1 stripe kit (already ordered) and use it as a stencil, paint the parts red and remove the stencil and clear over all of it so the stripe will be CF. I have seen a couple others with CF stripes and I like it so I am excited to see how it turns out. since the hood insert is CF I really think it will look good with a real CF ZL1 stripe from front to back. I kept waiting for an Anderson composite trunk but they still have no time frame of when they will make it again so I went with a VIS. the finish on it is excellent but the fit is not exact. It is close but not perfect. really the only problem is around the tail light. The left side is perfect but the right side is slightly off. I can build it up and make it right since I am painting that part anyway but it would have been nice not to have to fool with it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM