04-02-2011, 10:35 PM | #1 |
Drives: 2011 camaro 1ss Join Date: Mar 2011
Location: northern lower michigan
Posts: 74
|
CAT BACK OR AXLE BACK
Im wondering if an axle back borla atak exhaust will sound the same with my stock headers over a cat back?? Or does the cat back produce more hp and sound than the axle back? this is all with stock headers and a HPE CAI.. any info will help.... im new to this stuff
|
04-02-2011, 11:01 PM | #2 |
Drives: 2011 camaro 1ss Join Date: Mar 2011
Location: northern lower michigan
Posts: 74
|
Can someone plz give me some input? just ordered my car and waiting for gm to pick up the order. Want to get the exhaust before the car arrives so i can install it the same day. anyone know of exhaust brand similar to the borla atak sound for less money??
|
04-02-2011, 11:04 PM | #3 |
Drives: 2013 AGM 2SS/RS 1LE Join Date: Apr 2010
Location: Gainesville, FL
Posts: 924
|
Get a set of headphones. A bag of chips and a soda, sit back and start listening to all of the options and make your own choice.
http://www.camaro5.com/forums/showthread.php?t=21289 |
04-02-2011, 11:10 PM | #4 | |
Drives: 2011 camaro 1ss Join Date: Mar 2011
Location: northern lower michigan
Posts: 74
|
Quote:
Dude thanks a lot! tons of help!! |
|
04-02-2011, 11:11 PM | #5 |
v It bites.
Drives: 2011 IBM 2SS/RS Join Date: May 2008
Location: Orlando, FL
Posts: 3,585
|
I still don't quite get the question
There will be maybe 2.181481 hp gain for cat over axle. I originally bought an axle back because I put a hefty down payment on the car and was broke. I could afford an axle back because they were cost effective and greatly improved the sound. My feeling on catbacks are don't spend the money if you don't plan on getting at least headers and tune down the road. If you just want an immediate improvement in sound, you can pick up a set of Borla S type for around 500. Also...this was my rule of thumb from what I learned on this forum Buy axle back if you want immediate sound improvement for much less cost... Buy Borla S type if you want to do headers down the road Buy Borla ATAK if you plan on staying with a cat back and CAI. ATAK + headers was way too much for me. Buy Corsa if you want no drone. Buy Flowmaster if you want that old school muscle car sound.
__________________
2011 2SS/RS
Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit. |
04-02-2011, 11:11 PM | #6 |
|
get the Flowmaster system.
__________________
Jannetty Racing JRE Street Package
|
04-02-2011, 11:15 PM | #7 | |
Drives: 2011 camaro 1ss Join Date: Mar 2011
Location: northern lower michigan
Posts: 74
|
Quote:
I cant afford cat back and headers either. i was just wondering if the axle back would do the same thing a cat back would do with stock headers... thanks for the help guys.. and is flowmaster even louder than the atak? i dont want the exhaust to be too loud, but i want a good rich throaty sound. does the s type sound good at idle and low rpm? |
|
04-02-2011, 11:28 PM | #8 |
v It bites.
Drives: 2011 IBM 2SS/RS Join Date: May 2008
Location: Orlando, FL
Posts: 3,585
|
ATAK is the loudest I have come in contact with..
I had the borla S type axle back for awhile. It is not loud, will not bother your neighbors. But the tone is much improved, much deeper. Sounds good at start up and idle... Like I said, flowmaster cat back can be found at around 700 bucks...one of the best bargains around. It is not louder than ATAK, just has more of muscle car crunch. Borla S sounds more like a very deep gurgle
__________________
2011 2SS/RS
Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit. |
04-02-2011, 11:37 PM | #9 |
Drives: 2011 camaro 1ss Join Date: Mar 2011
Location: northern lower michigan
Posts: 74
|
thats cheap for cat back. 500 cheaper than atak. i like the sound of the atak when its at high rpm range. the flowmasters ive heard sound a little deeper than the atak. but for 500 less it sounds good to me. just wanna have that crisp sound while in higher rpm
|
04-02-2011, 11:57 PM | #10 |
Drives: 2010 TT Camaro SS Join Date: Mar 2011
Location: Augusta GA
Posts: 268
|
I have the borla cat back with stock headers and a roto-fab cold air intake... sounds great... as for axle back I dont think the sound would be too much different the only difference with the rest would be the x pipe that the cat back gives you...
|
04-03-2011, 01:04 AM | #11 |
Drives: 2011 camaro 1ss Join Date: Mar 2011
Location: northern lower michigan
Posts: 74
|
is it the atak or s type?? and is the atak too loud at low rpm to wake the neighbors? or can i sneak by without wakin everyone up for 10 blocks
|
04-03-2011, 01:13 AM | #12 |
Drives: 2010 TT Camaro SS Join Date: Mar 2011
Location: Augusta GA
Posts: 268
|
atak... should be good between 2000-2500 RPMs and if you want to be on the very safe side for that shift early (unless you have auto)
|
04-03-2011, 01:23 AM | #13 |
Drives: 2011 camaro 1ss Join Date: Mar 2011
Location: northern lower michigan
Posts: 74
|
dont have anything yet.. still waitin for gm to pick my order up. just went to dealership 2 weeks ago and it still hasnt been started. im gettin the manual so ill b good. this waiting game is gonna kill me in the next 6-8 weeks! thanks again for the info.
|
04-03-2011, 01:48 AM | #14 |
Account Suspended
Drives: '14 RRM 1LT/RS A6 Join Date: Mar 2009
Location: MA
Posts: 2,065
|
Magnaflow!!!!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stainless Works Retro Chambered Cat Back At Apex Motorsports!!! | Apex Motorsports | V8 Bolt-Ons & Tunes | 409 | 02-12-2013 08:04 PM |
NEW GROUP BUY- Solo Performance Axle Back with J pipes & Mach XL (L99) with J Pipes | GOINGSOLO2 | V8 Bolt-Ons & Tunes | 130 | 12-20-2011 07:15 PM |
Palm Beach County(GMPP AXLE BACK) | Ohten | USA - Southeast | 1 | 01-23-2011 01:36 PM |
Does an axle back have the same problems as a cat back? | G.E. | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 2 | 09-15-2009 03:31 PM |
Cat back or axle back? | norcalwheelman | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 2 | 07-22-2009 08:15 AM |