2010 - 2014 Camaro Window Valet available at RPI Designs

[RPI Designs]

Originally Posted by camguynj

Will depressing the inside door lock/unlock buttons have any effect on the windows with or without the car running?

No. This only works with the remote.

[SharpOldNo7]

Originally Posted by pete-1le

I'm considering buying one of these so that I can park the car in a very narrow storage area and then climb through the window to for exit and entry. How reliable are they? I'm talking 5mm each side of the car using a laser parking aid.

Once the window is up, I would not be able to open the car doors or trunk because of three brick walls. I might not be returning to the car for a week or two each time, so I wouldn't want to lock myself out and then not be able to move the car.

As long as it's plugged into the OBD2 port, it would likely work weeks later without opening the car doors first?

How do you get into the car with the windows down if you have only a 5mm (1/5 inch) gap from the side of the car to the brick wall on each side? You must be going through the trunk to get into the car. If you can get through the window, you would have to climb on the roof to get to them?????

You need to post a video of you getting into the car.

[RPI Designs]

2010-2015 Camaro Window Valet

Installation for the Camaro is just like it was for the C5 and C6. It just plugs into the diagnostics port. No wires, no cutting, no tools.

Once installed, the Window Valet™ for Camaro is ready to run. There's no configuration required. And, as always, Window Valet's do NOT reprogram the car's computers.

Description: The Window Valet™ for Camaro provides remote power window control for the 2010-2015 Camaro.

** Moving power windows can be dangerous if someone or something were to become pinched or trapped. By installing this product, you agree to the Terms of Use, Warranty, and Liability Waiver. Never use the remote power window feature unless both windows are completely clear of obstructions.

Installation:
The Window Valet™ for Camaro plugs into the diagnostics port, near the edge of the dash trim. There's no configuration required. Just plug it in! The Window Valet™ for Camaro does not reprogram any of the car's computers. So to reverse the install, just unplug the unit, and the car will immediately revert back to stock. Usage: To lower the windows via remote, press the remote unlock button three times. To raise the windows, press the remote lock button three times. (Or to prevent the car from blowing its horn multiple times, unlock-unlock-lock may be used.) For the features to activate, the buttons must be pressed in rapid succession, with less than one second between two sequential clicks.

Special Window Venting Feature: The window venting feature allows you to use the remote to leave the windows down about half-an-inch for airflow on hot days. To use this feature, simply issue the remote window up command, wait until the windows have been fully raised, wait a couple of more seconds, and then press the remote lock button one more time. The windows will lower just a fraction of an inch.

Note: The Camaro may toot its horn on the second and third remote lock commands even if its horn configuration is set to silent when locking. This is a feature of the Camaro, not the Window Valet™, and is designed to act as a lock confirmation. To prevent the horn from blowing when remotely raising the windows, you may use the alternate window up command sequence: Unlock, Unlock, Lock.

Item # C7V800C Use coupon Code LANA5 online or by phone when ordering and receive 5% off the listed website price and this item ships for FREE!!

Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=5532

[RPI Designs]

[RPIDon]

Use Coupon Code RPISHELLEY5 For Immediate Savings

[RPIDon]

Use HOLIDAYS to claim your discount upon checkout
https://www.rpidesigns.com/shop/item.aspx?itemid=5532

[RPIDon]

Thank You for shopping at https://www.rpidesigns.com/shop/item.aspx?itemid=5532