01-10-2016, 01:54 PM | #1 |
Drives: 17 SS 1LE, 14 Yukon Denali Join Date: May 2015
Location: Austin, TX
Posts: 355
|
Z28 Torque Specs
Wondering if anyone can confirm and answer some torque values?
Z28 front brakes: Wheel hub to knuckle: 79LBS, correct 18mm bolts that hold caliper to knuckle: read a few things. 30LBS plus 90 degrees 1/13/16: above values are correct Last edited by JTRATX; 01-14-2016 at 08:43 AM. |
01-10-2016, 10:28 PM | #2 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
These sound about right.
Same specs for the ZL1's I believe....
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
01-11-2016, 01:09 PM | #3 |
Drives: 17 SS 1LE, 14 Yukon Denali Join Date: May 2015
Location: Austin, TX
Posts: 355
|
Need confirmation on the caliper bolts. I listed 3 different options.
Anyone? Sent from my iPad using Tapatalk |
01-11-2016, 01:17 PM | #4 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
30 + 90 degrees is what I've been using.
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
01-13-2016, 10:48 AM | #5 |
Here is a page from the GM service manual with all of the torque specs for the brakes on our cars. Our brakes are the J57. Hope this helps.
http://goo.gl/OJgg5M |
|
01-13-2016, 09:59 PM | #6 | |
Drives: 17 SS 1LE, 14 Yukon Denali Join Date: May 2015
Location: Austin, TX
Posts: 355
|
Quote:
|
|
|
|
|
|