RDP Thanks Steve - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Joe.G · 11-02-2021, 07:41 AM

Steve has been great to work with, He went out of his way to get me a Product that he had stopped carrying which made it a lot easier for me. I ordered a SCT4X ( Ordered Fri was at my Door Sat ) and Headers ( Back ordered What isn't these days but I don't expect a issue getting them ) from him at this time but will order more, I did the tune for life and have used two so far. Steve was also a pleasure to talk with and answered all of my calls and questions and even responded to Emails at night. Thanks again.

George-CZ · 11-02-2021, 08:14 AM

I have to join in the praise and thanks to Steve.

A few days ago, I ordered QTP cutouts from him and dedicated my time to me on Sunday, when the others take time off.

In addition, I appreciate his patience in agreeing when my English is not at a high level.

So thank you very much too Steve

1JEWLDSSRS · 11-02-2021, 03:14 PM

This is the kind of compliments I like to hear!! I haven't had to deal with Steve yet, but have heard only GREAT things about him and his company. I am sure I will be in contact with him soon, as I have another project for my 2011 Camaro SS's intake system, and he would probably be my answer to what I'm gonna need.

Joe.G · 11-29-2021, 10:46 AM

Received my Coated Headers today way before I was expecting as I was advised at the time of order they were on a fairly long back order. Thanks again for everything they look great, the finish is one of the nicest I've seen.

11-02-2021, 07:41 AM	#1
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	RDP Thanks Steve Steve has been great to work with, He went out of his way to get me a Product that he had stopped carrying which made it a lot easier for me. I ordered a SCT4X ( Ordered Fri was at my Door Sat ) and Headers ( Back ordered What isn't these days but I don't expect a issue getting them ) from him at this time but will order more, I did the tune for life and have used two so far. Steve was also a pleasure to talk with and answered all of my calls and questions and even responded to Emails at night. Thanks again. __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

11-02-2021, 08:14 AM	#2
George-CZ Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018 Location: Czech Republic Posts: 1,592	I have to join in the praise and thanks to Steve. A few days ago, I ordered QTP cutouts from him and dedicated my time to me on Sunday, when the others take time off. In addition, I appreciate his patience in agreeing when my English is not at a high level. So thank you very much too Steve __________________ My life is a constant struggle with Camaro. K&N CAI, Stainless Power longtubes, high flow cats, modified Ragazzon High Performance axle back, Soler Performance ported throttle body, Soler Performance throttle controller, RAM clutch adjuster, modified LS7 clutch kit, Tick Performance billet bearing support, Tick Performance remote bleeder, separate clutch reservoir, BMR trailing arms, BMR toe rods, Pedders Suspension cradle bushing inserts, Control Arm Bushings, Strut tower brace, oil catch can, Hurst T-handle shifter, 20mm wheel spacers, DBA brakes, QTP Cutouts, Dynosteve tune.

11-02-2021, 03:14 PM	#3
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,435	This is the kind of compliments I like to hear!! I haven't had to deal with Steve yet, but have heard only GREAT things about him and his company. I am sure I will be in contact with him soon, as I have another project for my 2011 Camaro SS's intake system, and he would probably be my answer to what I'm gonna need. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

11-29-2021, 10:46 AM	#4
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	Received my Coated Headers today way before I was expecting as I was advised at the time of order they were on a fairly long back order. Thanks again for everything they look great, the finish is one of the nicest I've seen. __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.