05-28-2013, 08:23 PM | #1 |
|
Strut bar
I'm looking into to possibly getting a strut bar. I was thinking GM's strut bar but was persuaded against it. Lol ! Just curious as to what my fellow camaro brothers and sisters have? ( those who have strut bars)
Also is there that much a difference in a GM strut bar vs after market? Thxs in advance.
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
05-28-2013, 08:55 PM | #2 |
"Camaro Joe"
|
the strut bar is more of a cosmetic piece if you read pete basica's suspension guide. if you are going to get a strut bar the factory bar is the most unobtrusive and imo the nicest looking and there are many finish options for it, the other bars require too much modification and removal of engine covers etc
and i just found this as well http://www.camaro5.com/forums/showthread.php?t=298274 so its about which one looks nicest to you |
05-28-2013, 09:10 PM | #3 |
|
Thxs for the insight C4MBD
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
05-28-2013, 09:14 PM | #4 |
Drives: 2011 1LT/RS A6 RJT SuperCharged Join Date: Mar 2011
Location: 87114
Posts: 3,503
|
I have the GM one and love it. Every little bit helps.
__________________
Power is worthless without control. The 2nd protects the 1st.
BMR sub frame brace, BMR tunnel brace, LSR sways, LSR CM ca & tl, Sphon ExD el, GM tower brace, Megan EZ Streets, Goodridge Stainless Steel Braided brake lines, PowerStop D/S rotors & pads, Doug Thorty Ceramic Shorties, Magnaflow x-pipe, MRT V2.0, KICKER PowerStage sub & amp, Infinity speakers & tweeters, Viteese Throttle Controller, Viteese Paddle Shifters, ACS T2 Splitter, ACS T2 Ports/Quad LED lights, VDI kit, Havoc diffuser, IPF ECU/TRANS tuned, IPF/KPE Supercharged. 364RWHP/297RWTQ |
05-29-2013, 07:38 AM | #5 |
Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,110
|
Just put a factory one on yesterday. Nice and simple look to it. No modding, few mins to install.
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
05-29-2013, 08:19 PM | #6 |
|
Post some pics of you don't mind thxs
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
05-30-2013, 07:05 AM | #7 |
Drives: '11 Camaro 2SS/RS LS3 Join Date: Jan 2012
Location: Lexington, SC
Posts: 3,483
|
I have the GM brace. I agree it's a nice and clean looking unlike others on the market. Can be customized in many ways too as far as paint/powder coating.
|
05-30-2013, 08:23 AM | #8 |
Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,110
|
Excuse the dirt, havent had time to clean under the hood
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
05-30-2013, 08:27 AM | #9 |
Beast Rider
|
Here is a pic of the factory brace in my SS. I finished it with rattle cans and stainless hardware to mount.
__________________
"Just looking fast is sometimes all it takes!!!"
|
05-30-2013, 06:34 PM | #10 |
|
Thxs for the pics. I like it. So do you notice a difference in your driving since installing the bar? I know some say they don't and some say they do?
__________________
The DREAM is free... It's the HUSTLE that is sold seperately
|
05-30-2013, 06:40 PM | #11 |
Beast Rider
|
The brace went on at the same time as the ZL1 front and rear sway bars, so I can't honestly say that the shock tower brace has made a difference or not. I can say the car handles much much much better than stock with all 3 pieces on ....
__________________
"Just looking fast is sometimes all it takes!!!"
|
05-30-2013, 07:26 PM | #12 |
|
Added the GM strut tower brace about two months ago... very pleased with the look. Mind controlled by Cerebro
__________________
I solve problems for a living. Either accept my advice or go figure it out on your own.
|
05-31-2013, 05:36 PM | #13 |
|
I want to get the same thing.. Would you guys post links to where you bought it? Cost?
|
05-31-2013, 05:51 PM | #14 |
Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,110
|
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
|
|
|
|