ZL1 Magnaflow Quad tip Catback with 3" LTH connection. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

faceglide · 01-13-2016, 11:51 PM

Magnaflow catback. PN 15053

Selling my magnaflow zl1 catback exhaust, quad tip. Comes with 2 solo 3" resonators and a complete 3" header connection(i had the 2.5" coupler removed and welded in a 3" section) for a TRUE 3" exhaust. THe resonators have no impact on performance, but hushed the tone down just enough to not get murdered by my wife when starting the car in the garage. These are welded in, cost about 125 each.

2k miles on the kit, fantastic condition, I had it modified to get a perfect fit on my zl1(out the box i would sit fitment was 7/10). After owning the corsa and borla systems, this one and the NPP were my 2 favorites.

Looking for 1000 shipped, includes everything you need to make fit, the resonators require either a spacer for the tunnel brace to clear or the hotchkis tunnel brace subframe setup. Thanks guys!

I am selling because I am selling my car, likely trading in.

Car has BTR stage 3, SP LTH, no cats, the solo resonators and the 3" straight through. This exhaust has NO 2.5-2.75" bottleneck!

Also selling with the SP headers, if anyone is interested, 1 7/8", non catted.

faceglide · 01-14-2016, 12:12 AM

faceglide · 01-17-2016, 01:17 PM

800 shipped? do it?

faceglide · 01-30-2016, 09:10 PM

Still available, thanks.

ClR/A\SlH \v/2 · 01-31-2016, 04:37 PM

Quote:

Originally Posted by faceglide

Magnaflow catback. PN 15053

Selling my magnaflow zl1 catback exhaust, quad tip. Comes with 2 solo 3" resonators and a complete 3" header connection(i had the 2.5" coupler removed and welded in a 3" section) for a TRUE 3" exhaust. THe resonators have no impact on performance, but hushed the tone down just enough to not get murdered by my wife when starting the car in the garage. These are welded in, cost about 125 each.

2k miles on the kit, fantastic condition, I had it modified to get a perfect fit on my zl1(out the box i would sit fitment was 7/10). After owning the corsa and borla systems, this one and the NPP were my 2 favorites.

Looking for 1000 shipped, includes everything you need to make fit, the resonators require either a spacer for the tunnel brace to clear or the hotchkis tunnel brace subframe setup. Thanks guys!

I am selling because I am selling my car, likely trading in.

Car has BTR stage 3, SP LTH, no cats, the solo resonators and the 3" straight through. This exhaust has NO 2.5-2.75" bottleneck!

Also selling with the SP headers, if anyone is interested, 1 7/8", non catted.

X pipe?

Sent from my SM-N910V using Tapatalk

faceglide · 01-31-2016, 04:39 PM

3 inch x pipe. The only change is the resonators and 3 inch header connections.

Sent from my SAMSUNG-SM-G920A using Tapatalk

ClR/A\SlH \v/2 · 01-31-2016, 04:42 PM

I'm curious... what other performance mods do you have to achieve the 700 whp?

Sent from my SM-N910V using Tapatalk

danny03cobra · 01-31-2016, 11:46 PM

any problems with fitment?

01-13-2016, 11:51 PM	#1
faceglide Drives: gone.... Join Date: Nov 2015 Location: Bay Area Posts: 36	ZL1 Magnaflow Quad tip Catback with 3" LTH connection. Magnaflow catback. PN 15053 Selling my magnaflow zl1 catback exhaust, quad tip. Comes with 2 solo 3" resonators and a complete 3" header connection(i had the 2.5" coupler removed and welded in a 3" section) for a TRUE 3" exhaust. THe resonators have no impact on performance, but hushed the tone down just enough to not get murdered by my wife when starting the car in the garage. These are welded in, cost about 125 each. 2k miles on the kit, fantastic condition, I had it modified to get a perfect fit on my zl1(out the box i would sit fitment was 7/10). After owning the corsa and borla systems, this one and the NPP were my 2 favorites. Looking for 1000 shipped, includes everything you need to make fit, the resonators require either a spacer for the tunnel brace to clear or the hotchkis tunnel brace subframe setup. Thanks guys! I am selling because I am selling my car, likely trading in. Car has BTR stage 3, SP LTH, no cats, the solo resonators and the 3" straight through. This exhaust has NO 2.5-2.75" bottleneck! Also selling with the SP headers, if anyone is interested, 1 7/8", non catted.

01-31-2016, 04:42 PM	#7
ClR/A\SlH \v/2 Drives: 92 RS Join Date: Apr 2015 Location: Ga/La Posts: 34	I'm curious... what other performance mods do you have to achieve the 700 whp? Sent from my SM-N910V using Tapatalk
$ClR/A\SlH \v/2 is offline$

01-17-2016, 01:17 PM	#3
faceglide Drives: gone.... Join Date: Nov 2015 Location: Bay Area Posts: 36	800 shipped? do it?

01-30-2016, 09:10 PM	#4
faceglide Drives: gone.... Join Date: Nov 2015 Location: Bay Area Posts: 36	Still available, thanks.

01-31-2016, 04:39 PM	#6
faceglide Drives: gone.... Join Date: Nov 2015 Location: Bay Area Posts: 36	3 inch x pipe. The only change is the resonators and 3 inch header connections. Sent from my SAMSUNG-SM-G920A using Tapatalk

01-31-2016, 11:46 PM	#8
danny03cobra Drives: 2011 SS Join Date: Nov 2015 Location: Menifee Posts: 60	any problems with fitment?