12-13-2013, 07:35 PM | #1 |
G-Force strange rear setup ordered!
Just bit the bullet and called G-Force. Ordered their Strange setup with S-trac, axles and one piece driveshaft. I'm stoked! Now I won't be leery of making additional power for fear of breaking stuff. Also threw in a set of BMR trailing arms. I'm hoping to be track worthy in no time!
Anyone with experience using this setup feel free to post. Thanks. And thanks to G-Force!
__________________
|
|
12-13-2013, 08:49 PM | #2 |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
Thanks man!
I'm sure you will get a flood of happy Gforce customers posting up soon. Thanks Chris |
12-14-2013, 06:35 AM | #3 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
Congrats! Great choice! I am very happy with my 9" setup. Nice to be able to beat on this with no worries of breaking.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
12-14-2013, 07:27 AM | #4 |
__________________
|
|
12-14-2013, 07:31 AM | #5 | |
Quote:
Is your trans stock? I'm guessing this will be my weak link now. Any idea how capable the m6 is?
__________________
|
||
12-14-2013, 09:34 AM | #6 | |
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
Quote:
Love my GForce btw! Good decision!!!!!!!!!!!!!!
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
|
|
12-14-2013, 11:56 AM | #7 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
I'm over 630rwhp with a stock m6. I have not had a chance to run this new supercharger at the track like I wanted to. 1st pass down the strip, I smoked the 800ftlb textralia clutch and slave cylinder at half track. New clutch is in and will try again this spring. But I do plan on pulling the trans and getting it built, it is the last weak link.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
12-14-2013, 05:10 PM | #8 |
I feel a little better now! (And so does my pocket)
Should be fine for me for quite a while then, as long as I stay where I am that is. Thanks for the responses.
__________________
|
|
12-14-2013, 07:33 PM | #9 |
Drives: 2011 Camaro SS2/RS Join Date: Jul 2011
Location: Beirut, Lebanon
Posts: 92
|
Congrats Jpb972, after reading reviews on G-force's 9" kit, looks like you will love the kit as much as I'll love mine once I receive the kit... Am Finishing up kit details with Chris and I'll be right behind you inline waiting for mine
Man I got fed up of fixing parts of my stock rear every time I step on the gas peddle :P After installing the G-force 9" rear end in my camaro, I know it'll be bullet proof Again bro, congrats |
12-14-2013, 07:42 PM | #10 | |
Quote:
Looks like we will both be Rockin' and Rollin'.
__________________
|
||
12-14-2013, 07:43 PM | #11 |
Drives: 2011 Camaro SS2/RS Join Date: Jul 2011
Location: Beirut, Lebanon
Posts: 92
|
Hell Yeahhhh!!
|
12-14-2013, 11:19 PM | #12 |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
LOL Thanks guys!
You will love your 9" kits, the quality, fit and performance is top of the line. Thanks Chris |
12-15-2013, 08:09 AM | #13 |
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
I love mine, just took it to Texas from Tennessee for a 417 build and it performed flawlessly.
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
12-16-2013, 07:44 AM | #14 |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
|
|
|
|
|