"The Shop" Finally - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mws444 · 07-23-2011, 12:36 PM

Ok guys, Not one to be left out here I am going to share my three year fantasy come true. I have always wanted a nice airconditioned clean place to work on my cars dating back to 1997 when I started restoring my '69 vert SS350. I started getting more serious when I ordered the new Camaro back in the pre order days. Thanks to another good year in the working thing I am finally starting this thing. It is a big one so please hang in there with me during this adventure.
The building will measure 80' x 125' with 18' endwalls. It is further split into three sections as follows:
25' x 80' for work storage
50' x 80' for the climate controlled shop/two level office meeting area.
50' x 80' for enclosed truck parking.

I am enclosing pictures of the pad prep and my very crude attempt with google layout to show you what I am talking about as far as the general layout and upstairs of the doghouse/mancave.

SUX2BU · 07-23-2011, 12:40 PM

Wow, you're not F'ing around.

mws444 · 07-23-2011, 12:43 PM

We are planning to start putting the forms up for the concrete on 8/3 or next Wed. May not look like it but there are 39 semi loads of primary screenings used to prepare the pad site. The building is slated to be delivered the first week in Aug. as well. The erection (lol) of the building should only take a couple of weeks, the finishout???????? I hope to be able to move fast, but the wife has house remodeling plans that may interfere.

mws444 · 07-23-2011, 01:00 PM

Quote:

Originally Posted by SUX2BU

Wow, you're not F'ing around.

LOL...I am building it right beside my work. Since I am there about 10 hours a day anyway I am hoping it will be a little sanctuary from the grind. My kids also need a place to hang out during the busy season out of the office and hopefully doing their homework. Nearest place to eat is five miles away and I am sick of Subway and Mc Donalds (about the only options for lunch). Now I can cook a good lunch and not lose so much time or be very far from the plant.
Just need to figure out a way to make time to work on my toys.

JusticePete · 07-23-2011, 01:14 PM

Is this a run way for your new jet or a slab for the new Pentagon in El Paso?

mws444 · 07-23-2011, 01:20 PM

Quote:

Originally Posted by JusticePete

Is this a run way for your new jet or a slab for the new Pentagon in El Paso?

No it is a storage building/office/break area/repair shop. 100% business use. Although the owner said he would let me use it after hours and on weekends.

mws444 · 07-23-2011, 02:13 PM

I am still trying to figure out the lower level, but kind of have this in mind for it.

stratman2SSRS · 07-23-2011, 02:25 PM

I hope it's at least 1/4 mile from the road so you can do some practice runs in your driveway. Looks awesome!!!

mws444 · 07-23-2011, 05:47 PM

Quote:

Originally Posted by stratman2SSRS

I hope it's at least 1/4 mile from the road so you can do some practice runs in your driveway. Looks awesome!!!

Nah, only about 50 yrds from the road. I had to make it line up with the front drive in order to be able to back the Motorhome and trailer in. It is also close to my regular office there.

Mr Twisty · 07-24-2011, 10:28 AM

You're gonna make Jay Leno jealous... NICE!

JusticePete · 07-24-2011, 10:33 AM

Leno already is. His twin turbo only has Xa coilovers while Mike has Supercars!

TGG1SS · 07-24-2011, 10:40 AM

Looks like a great garage from the plan layout. Subscribed!!

mws444 · 07-24-2011, 11:25 AM

Thanks everyone! I am going all out on this one. After spending the last 28 years doing nothing but work and home I just want to slow down and enjoy things a little. I had a stoke (actually a whole bunch of little ones and one doozie) back about 6 years ago.....kinda changed my outlook on life. I was very fortunate and Blessed not to have any long term damage.
It is just very hard for me not to work 70 hours a week....but I am trying.

mws444 · 07-24-2011, 11:14 PM

Quote:

Originally Posted by JusticePete

Leno already is. His twin turbo only has Xa coilovers while Mike has Supercars!

Leno is like the King of car collecting and has a garage to die for. I would love the chance to tour his place!

Pete you are right though, mine has the Supercar coilovers! I wonder if he would like to race me someday?

07-23-2011, 12:36 PM	#1
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	"The Shop" Finally Ok guys, Not one to be left out here I am going to share my three year fantasy come true. I have always wanted a nice airconditioned clean place to work on my cars dating back to 1997 when I started restoring my '69 vert SS350. I started getting more serious when I ordered the new Camaro back in the pre order days. Thanks to another good year in the working thing I am finally starting this thing. It is a big one so please hang in there with me during this adventure. The building will measure 80' x 125' with 18' endwalls. It is further split into three sections as follows: 25' x 80' for work storage 50' x 80' for the climate controlled shop/two level office meeting area. 50' x 80' for enclosed truck parking. I am enclosing pictures of the pad prep and my very crude attempt with google layout to show you what I am talking about as far as the general layout and upstairs of the doghouse/mancave. Attached Images __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood! Last edited by mws444; 07-25-2011 at 06:51 PM.

07-23-2011, 12:40 PM	#2
SUX2BU Quit being a pu$$y Drives: FAST Join Date: Jan 2011 Location: Sachse TX (DFW) Posts: 5,825 View My Garage	Wow, you're not F'ing around. __________________ <----- Click HERE to see ALL of my mods/write ups

07-23-2011, 12:43 PM	#3
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	We are planning to start putting the forms up for the concrete on 8/3 or next Wed. May not look like it but there are 39 semi loads of primary screenings used to prepare the pad site. The building is slated to be delivered the first week in Aug. as well. The erection (lol) of the building should only take a couple of weeks, the finishout???????? I hope to be able to move fast, but the wife has house remodeling plans that may interfere. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

07-23-2011, 02:13 PM	#7
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	I am still trying to figure out the lower level, but kind of have this in mind for it. Attached Images __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood! Last edited by mws444; 07-25-2011 at 06:58 PM.

07-23-2011, 02:25 PM	#8
stratman2SSRS Drives: Lingenfelter Camaro Join Date: Apr 2009 Location: Ontario Posts: 2,160 View My Garage	I hope it's at least 1/4 mile from the road so you can do some practice runs in your driveway. Looks awesome!!! __________________

07-23-2011, 01:14 PM	#5
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Is this a run way for your new jet or a slab for the new Pentagon in El Paso?

07-24-2011, 10:28 AM	#10
Mr Twisty Drives: the 2nd amendment home Join Date: May 2008 Location: OK Posts: 14,707	You're gonna make Jay Leno jealous... NICE! __________________ "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." -- Benjamin Franklin

07-24-2011, 10:33 AM	#11
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Leno already is. His twin turbo only has Xa coilovers while Mike has Supercars!

07-24-2011, 10:40 AM	#12
TGG1SS Drives: 2012 AGM Camaro 1SS M6 LS3 Join Date: Jul 2010 Location: SoCal Posts: 252 View My Garage	Looks like a great garage from the plan layout. Subscribed!!

07-24-2011, 11:25 AM	#13
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Thanks everyone! I am going all out on this one. After spending the last 28 years doing nothing but work and home I just want to slow down and enjoy things a little. I had a stoke (actually a whole bunch of little ones and one doozie) back about 6 years ago.....kinda changed my outlook on life. I was very fortunate and Blessed not to have any long term damage. It is just very hard for me not to work 70 hours a week....but I am trying. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New to the family. Finally got mine!	BA RS	Camaro Photos \| Spyshots \| Video \| Media Gallery	17	05-03-2011 08:42 PM
Finally ordered, finally posting.	SolidGoldBomb	5th Gen Camaro SS LS LT General Discussions	29	04-21-2011 01:07 AM
It's Here...It's finally freakin here!!!!!	blkonblk	Canada	34	06-13-2009 07:31 AM
The final ARRRGHH Thread (really!). I finally get mine Monday. Pics/Vid comning.	2Muchmark	5th Gen Camaro SS LS LT General Discussions	33	06-08-2009 08:49 PM
Detroit's 3 finally on track, tough critic says	TAG UR IT	General Automotive + Other Cars Discussion	1	10-14-2007 12:16 PM