03-04-2022, 06:06 AM | #1 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2015
Location: Mount Pleasant, Pa
Posts: 20
|
2013 ZL1 Drag Wheel/Tire Advice Needed
Hi everyone. I am sure this topic has been beat to death through the forums but I am hoping someone can give me some quick info to help.
I was planning on ordering a set of Weld Wheels and MT tires from Carlyle Racing but just found out BMR bought them and they don't do wheel/tire packages anymore. So I am planning on spec'ing out my own setup and wanted to know the exact size wheels and tires I should be looking for. Want to run 17's in the rear because I don't have the 15" brake conversion kit yet. Please let me know your comments if you can. Thanks in advance, Andy
__________________
2013 IOM ZL1 A6 - 680RWHp
2002 ProCharged Trans Am - 850RWHP 2006 Twin Turbo'd Dodge Ram Cummins - 900RWHP 2015 VW Jetta TDI SE - Daily Driver |
03-04-2022, 08:00 AM | #2 |
Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
MT ET Street R - P305/45R17 w/ matching wheels.
|
03-04-2022, 09:14 AM | #3 |
Drives: 2013 Camaro ZL1 Join Date: Jun 2015
Location: Mount Pleasant, Pa
Posts: 20
|
Thank You. Do you know the wheel size with backspacing that I need?
__________________
2013 IOM ZL1 A6 - 680RWHp
2002 ProCharged Trans Am - 850RWHP 2006 Twin Turbo'd Dodge Ram Cummins - 900RWHP 2015 VW Jetta TDI SE - Daily Driver |
03-04-2022, 09:51 AM | #4 |
Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
Size 17 x 10.5"
Bolt Circle 5 x 120" Back Space 7 Offset 32 You can go Weld on the high end, Racestar on the low end. Here's Prostock John's sticky: https://www.camaro5.com/forums/showthread.php?t=392950 |
03-04-2022, 10:03 AM | #5 |
Drives: 2013 ZL1 and 2019 Ram Laramie Join Date: May 2017
Location: Milwaukee
Posts: 1,259
|
And, if you are unaware, with most 17's you will have to tie back the emergency brake cable and notch the lca's.
|
|
|
|
|