09-10-2016, 12:57 AM | #1 |
Camaro1/LE
Drives: 2015 Camaro SS/RS 1LE Join Date: Sep 2015
Location: California
Posts: 40
|
2015 1LE Upgrades
So I'm thinking about doing this to my 1LE. I was wondering what I would be running to the Crank and to the Wheels if I did and also if anyone can point me in the direction of where I can find these parts slightly used or cheaper then they are?
|
09-10-2016, 01:01 AM | #2 |
Tri-County Camaro SWFL
|
I noticed you ordered LT headers twice. Once on their own and once in a package. But it will be right around where every other decent sized cam only LS3 dynos at which is high 400 wheel like 475-485 range.
__________________
|
09-10-2016, 01:41 AM | #3 |
Drives: 2015 Camaro SS/1LE Join Date: May 2015
Location: Nevada
Posts: 947
|
We're usually a little lower on power output on the west coast with our crap California 91 gas, but 470 rwhp, maybe a bit more. Could be some 1LE/SS owners out here with that cam that will chime in.
You won't know your crank hp unless your LS3 was run on an engine dyno. 15% loss from engine to rear wheels is a long time assumed number for manual transmission.
__________________
2015 2SS/1LE/RECARO/NPP/RS/NAV
|
09-10-2016, 01:43 AM | #4 |
Drives: 2015 Camaro SS/1LE Join Date: May 2015
Location: Nevada
Posts: 947
|
__________________
2015 2SS/1LE/RECARO/NPP/RS/NAV
|
09-10-2016, 06:22 AM | #5 | |
Drives: 2017 ZL1 A10 Join Date: Aug 2009
Location: Dubai
Posts: 1,250
|
Quote:
Ahmad
__________________
2017 ZL1 A10 SW (SOLD)
Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER. |
|
09-10-2016, 11:05 AM | #6 |
Drives: 2015 camaro 1le Join Date: Jun 2015
Location: pasco wa
Posts: 233
|
I think at the end is the labor to install all the items listed. That is the only place that shows labor.
|
09-10-2016, 03:52 PM | #7 | |
Tri-County Camaro SWFL
|
Quote:
__________________
|
|
09-10-2016, 07:06 PM | #8 |
USA-1
|
Save about $700 on your headers...
http://www.speed-engineering.com/sho...stainless.html No, they aren't Kooks. But do some research on the forums here and you'll see that everyone who has them loves them. As soon as I get some extra funds I'll be buying a pair. |
09-16-2016, 10:59 AM | #9 |
That's a little high
I'm all in at 3000 That's with 3 different times paying for a tune and switching tuners
__________________
NPP Fuse Pulled,2" Texas Speed Headers Cat Delete,Custom CAI from J&A Racing,Custom Grind Cam,660 Lift BTR Dual Springs,7.40 Push Rods,MSD Plug Wires,BMR Trailarms,495rwhp, 475rwtq,Stock Clutch,Woods Performance Tune
|
|
|
|
|
|