You are browsing camaro6 
09-30-2022, 07:43 PM
|
#1 |
 
Drives: '23 LT1 conv, '07 911 Turbo Join Date: Jun 2018
Location: Lexington, KY
Posts: 44
|
Will it fit? 20x10.5 +26mm Fronts with 285/30/18
2023 LT1 Convertible, brand new car at stock height. Let's hear it guys.
Will it fit? HRE FF-04 20x10.5 +26mm Fronts with 285/30/18 |
|
|
|
09-30-2022, 08:46 PM
|
#2 |
    
Drives: Chevrolet SS 1LE Join Date: Oct 2019
Location: St. Charles, MO
Posts: 1,446
|
I think you're going to need a bit of spacer to make that work. The stock SS 1LE front wheel is 20x10 et20, which gives backspacing of 6.29". The wheel you're looking at will have backspacing of 6.77", or 0.48" more. I know someone who runs a 19x10 et23 (backspacing 6.41") with no spacer, but that's about the max, at least with an MRC-equipped car. Not sure how much more inner clearance you get with standard struts, if any. But I would expect that you will need 1/4"-1/2" spacers.
__________________
Matt Miller
2020 SS 1LE |
|
|
|
|
10-01-2022, 01:24 PM
|
#3 |
 
Drives: Rapid Blue 2022 Camaro 1SS Join Date: Sep 2021
Location: Waterloo, Iowa
Posts: 204
|
I have a 10.5" wheels on the front of my 1SS with 295's. The ET is 30, and I have a 5mm spacer on them as well making the actual ET25. It is a tight fit, but I have no rubbing issues. I am running 19" wheels and I kept the overall diameter as close to the stock diameter as possible.
__________________
9/9/2021 - 1100 (date of deposit)
10/15/2021 - 2000 11/4/2021 - 3100 Status TPW 11/15 11/9/2021 - 3400 Status TPW 11/15 11/24/2021 - 3800 Status built 11/21/2021 12/2/2021 - 5000 Status 12/13/2021 - 6000 Status |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
