kid that needs some help - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

blake22 · 08-13-2009, 05:20 PM

okay im 15 and i just got a 78 to rebuild and drive in high school. my dads not home and wont anser his phone to ask him this so,,, i took out the carpet and front seats already and i just cant figure out how to get the rear seats out. help please?

PsyDoc · 08-13-2009, 07:20 PM

If I remember correctly, to remove the lower cushions you need to push the front of the bottom cushion back and then lift up. There is a "C-bracket" or hook type bracket that a metal rod (part of the seat frame itself) fits. Pushing the seat cushion back forces the metal rod out of the bracket and then lifting up clears the C-bracket attached to the floor.

Next, there are two bolts that have to be removed so that you can remove the back of the seat. Remove the bolts and then push the seat-back toward the trunk and lift up. There are a few hooks in the sheet metal that the seat-back slides down in that secures the seat-back to the sheet metal. The two bolts are there so that the seat does not accidentally dislodge.

1320junkie · 08-13-2009, 07:22 PM

That is so awesome that you are out working on your car at your age

My 76 · 08-13-2009, 07:24 PM

To remove the seat bottoms you must push the bottom towards the back of the car and then lift up. They hook into a bracket that is welded to the floorpan. Sometimes you have to apply a good bit of pressure backwards. The back part of the seat at the bottom remove the two bolts at the bottom and lift it off the hooks. Hope this helps. Good Luck

blake22 · 08-14-2009, 12:07 PM

sweet! i did it. haha. thanks alot!!

anyone know where i can get a reproduction headliner?

Supercamaro64 · 08-14-2009, 12:35 PM

im in the same boat. im 16 and i got an 86 berlinetta tht im workin on. good luck with ur car man!!!

blake22 · 08-14-2009, 01:02 PM

sweet car man! good luck with urs to dude!

CamaroKid · 08-14-2009, 03:01 PM

Quote:

Originally Posted by blake22

sweet car man! good luck with urs to dude!

I'm 17 and once I get a job I'm going to go Camaro hunting. My mom has a '78 Z28 that I work on.

If you are up to joining another forum, I'd recommend NastyZ28. (second generation Camaro forum).

http://www.nastyz28.com/forum/index.php

1320junkie · 08-14-2009, 03:13 PM

I love this thread

blake22 · 08-14-2009, 06:07 PM

hey 1320junkie, how do you mannage getting a 10 camaro and ZR1? your so lucky

so nasty z28 is all 2nd gen? thats what i was trying to find but didnt feel like searching much then i found this one. but i kinda like this one, all the people so far are real nice compared to some other ones..

1320junkie · 08-14-2009, 06:10 PM

Quote:

Originally Posted by blake22

hey 1320junkie, how do you mannage getting a 10 camaro and ZR1? your so lucky

so nasty z28 is all 2nd gen? thats what i was trying to find but didnt feel like searching much then i found this one. but i kinda like this one, all the people so far are real nice compared to some other ones..

Hard work set your goals and stick to them

*CamaroSpike23* · 08-14-2009, 06:12 PM

Quote:

Originally Posted by blake22

sweet! i did it. haha. thanks alot!!

anyone know where i can get a reproduction headliner?

www.yearone.com

www.nastyz28.com

blake22 · 08-14-2009, 06:16 PM

yeah i hear that alot from parents

haha. if you dont mind me asking, how old are you?

and thanks for the link!

CamaroKid · 08-16-2009, 10:10 PM

Quote:

Originally Posted by blake22

hey 1320junkie, how do you mannage getting a 10 camaro and ZR1? your so lucky

so nasty z28 is all 2nd gen? thats what i was trying to find but didnt feel like searching much then i found this one. but i kinda like this one, all the people so far are real nice compared to some other ones..

Yep, there's a few members with a 1st gen or 3rd gen, all are welcome pretty much.

If you need help with anything, feel free to PM me.

08-13-2009, 05:20 PM	#1
blake22 1978 camaro Drives: needs work Join Date: Aug 2009 Location: texas Posts: 19	kid that needs some help okay im 15 and i just got a 78 to rebuild and drive in high school. my dads not home and wont anser his phone to ask him this so,,, i took out the carpet and front seats already and i just cant figure out how to get the rear seats out. help please?

08-14-2009, 12:35 PM	#6
Supercamaro64 Right, right. Drives: 79 Z28, 86 Camaro, 94 Burb 4x4 Join Date: Dec 2008 Location: Fond du Lac, Wisconsin Posts: 1,350 View My Garage	im in the same boat. im 16 and i got an 86 berlinetta tht im workin on. good luck with ur car man!!! __________________ "You wanna lay the fate of the world on the kids camaro? Thats cool." "When reporters asked what it was, one official stated, 'It's a small, vicious animal that eats Mustangs.'" The Creampuff Fleet-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTO kid gets owned	Devil-eyes	Off-topic Discussions	28	08-10-2009 07:25 PM
My kid got him some school supplies(read)	RJT-Maro	Off-topic Discussions	2	08-08-2009 08:41 PM
NEW KID ON THE BLOCK	BANZAIKEV	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	5	07-30-2009 11:18 PM
ANGRY GERMAN KID!!! FUNNY AS H3LL!!	Matrix	Off-topic Discussions	26	01-21-2009 09:13 AM

08-13-2009, 07:20 PM	#2
PsyDoc Drives: Soon-to-be 1st Gen Join Date: Nov 2008 Location: Southeast Posts: 249	If I remember correctly, to remove the lower cushions you need to push the front of the bottom cushion back and then lift up. There is a "C-bracket" or hook type bracket that a metal rod (part of the seat frame itself) fits. Pushing the seat cushion back forces the metal rod out of the bracket and then lifting up clears the C-bracket attached to the floor. Next, there are two bolts that have to be removed so that you can remove the back of the seat. Remove the bolts and then push the seat-back toward the trunk and lift up. There are a few hooks in the sheet metal that the seat-back slides down in that secures the seat-back to the sheet metal. The two bolts are there so that the seat does not accidentally dislodge.

08-13-2009, 07:22 PM	#3
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	That is so awesome that you are out working on your car at your age

08-13-2009, 07:24 PM	#4
My 76 Drives: 1976 Camaro Join Date: Jul 2009 Location: Jacksonville, Fla Posts: 73	To remove the seat bottoms you must push the bottom towards the back of the car and then lift up. They hook into a bracket that is welded to the floorpan. Sometimes you have to apply a good bit of pressure backwards. The back part of the seat at the bottom remove the two bolts at the bottom and lift it off the hooks. Hope this helps. Good Luck

08-14-2009, 12:07 PM	#5
blake22 1978 camaro Drives: needs work Join Date: Aug 2009 Location: texas Posts: 19	sweet! i did it. haha. thanks alot!! anyone know where i can get a reproduction headliner?

08-14-2009, 01:02 PM	#7
blake22 1978 camaro Drives: needs work Join Date: Aug 2009 Location: texas Posts: 19	sweet car man! good luck with urs to dude!

08-14-2009, 03:13 PM	#9
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	I love this thread

08-14-2009, 06:07 PM	#10
blake22 1978 camaro Drives: needs work Join Date: Aug 2009 Location: texas Posts: 19	hey 1320junkie, how do you mannage getting a 10 camaro and ZR1? your so lucky so nasty z28 is all 2nd gen? thats what i was trying to find but didnt feel like searching much then i found this one. but i kinda like this one, all the people so far are real nice compared to some other ones..

08-14-2009, 06:16 PM	#13
blake22 1978 camaro Drives: needs work Join Date: Aug 2009 Location: texas Posts: 19	yeah i hear that alot from parents haha. if you dont mind me asking, how old are you? and thanks for the link!