03-01-2012, 07:50 PM | #15 |
Drives: 2007 Corvette C6 983 RWHP Join Date: Dec 2011
Location: Montreal, Canada
Posts: 690
|
I found it well worth it. Doing paint properly isn't that cheap either and in my case only lasted a few years. Over time the racedeck will be cheaper.
__________________
2007 C6 vert, auto, F55, LT3
LME LS402 , WCCH 245 Heads, Pat G. Custom cam YSI / 3.0 pulley, ARH 1 7/8 headers, NPP Dewitts / dual spals, A&A dual pump fuel system. 3.42 polished gears, hardened shafts, Alky control meth, Cartech line lock, ECS axle loops, Trans brace, 6L80 built by me. ID 1000 injectors, comp rockers, Morel lifters, BT springs, Trend 3/8 pushrods, ATI 10% OD Damper Circle D Triple Disc stall 1009 RWHP @ 7000, 817 RWTQ @ 6000, |
03-15-2012, 06:45 PM | #16 |
Car nut
Drives: Tahoe Z71, Race cars Join Date: Aug 2010
Location: Las Vegas, NV
Posts: 671
|
When I built my shop I used Ucoatit epoxy with the flecks and clearcoat. It worked REALLY well, I didn't have any fading or chipping at all (I prepped really well). Their website has a lot of info.
www.ucoatit.com
__________________
Quote: Don't you just hate it when Satan steals your ride and does all these weird ass mods to it?
R.I.P. Evan .. A true Friend |
04-10-2012, 01:26 PM | #17 |
Scottish Knight
Drives: RS/2SS 6 speed manual Join Date: Jan 2012
Location: Washington State
Posts: 330
|
i used the garage floor paint from Lowe's, works great...took me most of a nice sunny saturday...made sure the floor was extra clean...i washed it like 3 times with a good rinse between...then used the etching and pretty much followed the instructions...then applied the paint and let it cure over nite...worked out great...garage looks great, have drywall walls painted them white with an orange accent wall for my orange/black RS/2SS...woot...he loves it in his nice clean space...anyway...2 years and the paint looks great...they will tint it any clor u want i had mine tinted a light grey and the kit comes with the "Sprinkles" for accent...looks nice and i can wash it down in like 5 minutes nice for working on as well. just my nickle worth.
__________________
|
04-13-2012, 01:37 AM | #18 |
Drives: Getting 2010 Camaro Join Date: Jul 2008
Location: Vancouver
Posts: 1,149
|
the ONLY epoxy flooring you should be using is a 100% epoxy. No water, no oil, no solvents. Wolverine coatings are the best on the market. I grind metal, weld, solder, drop wrenches. ZERO issues
|
04-13-2012, 09:10 AM | #19 |
Drives: 2012 Camaro SS2 Join Date: Dec 2011
Location: Garland Tx
Posts: 453
|
I used the epoxy from Home Depot over 5 years ago and it has held up very well.
The trick is that you have to clean and etch the surface. If yours came up in a year, the surface was not prepared properly. Common causes are not allowing the floor to dry after you etch. It takes a full day at 80 degrees. Failutre to degrease. And last, not etching at all or improper;y. Etching has to be worked aggressivvely into the surface. You cannot just brush it on and hose it off, you have to work it around. |
04-13-2012, 10:49 AM | #20 |
Drives: Beest Join Date: Aug 2011
Location: Indy
Posts: 660
|
|
05-13-2012, 06:25 PM | #21 |
Drives: 2010 Chevy Camaro SS Join Date: May 2012
Location: Canada
Posts: 15
|
|
05-15-2012, 01:41 AM | #22 |
Drives: 2010 IBM 2SS/RS Join Date: Apr 2010
Location: Elk Grove California
Posts: 310
|
For those of you with racedeck, do you hear the racedeck moving around under your feet when walking over it?
|
05-15-2012, 12:31 PM | #23 | |
Drives: 2007 Corvette C6 983 RWHP Join Date: Dec 2011
Location: Montreal, Canada
Posts: 690
|
Quote:
A little bit at the beginning until it settles in. Nothing after a while.
__________________
2007 C6 vert, auto, F55, LT3
LME LS402 , WCCH 245 Heads, Pat G. Custom cam YSI / 3.0 pulley, ARH 1 7/8 headers, NPP Dewitts / dual spals, A&A dual pump fuel system. 3.42 polished gears, hardened shafts, Alky control meth, Cartech line lock, ECS axle loops, Trans brace, 6L80 built by me. ID 1000 injectors, comp rockers, Morel lifters, BT springs, Trend 3/8 pushrods, ATI 10% OD Damper Circle D Triple Disc stall 1009 RWHP @ 7000, 817 RWTQ @ 6000, |
|
05-15-2012, 02:13 PM | #24 |
Rolling along...
|
When I used to sell and install RaceDeck, the noise from walking on it seems to depend on the condition of the concrete. The smoother the concrete was, the more likely it was to make noise when walking on it. For the 2 customers of mine that this bugged, we pulled up the RaceDeck and laid down the same plastic/foam underlayment material used for in home laminate wood flooring. Worked great!
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for cool banners for my garage | the rich dude | Garage / Tools Discussions | 15 | 06-02-2014 05:33 AM |
My "new" garage | Chevyg1rl | Garage / Tools Discussions | 42 | 02-05-2012 09:58 PM |
New House w/ 3 car garage | 01pewterz28 | Garage / Tools Discussions | 34 | 08-11-2011 08:41 AM |
$300 worth of grocceries and cleaned out my garage fer the Vert. | SUX2BU | Camaro Photos | Spyshots | Video | Media Gallery | 15 | 03-23-2011 11:01 PM |
garage? | Mrbobcat | Off-topic Discussions | 5 | 05-07-2008 07:46 PM |