09-16-2016, 08:58 PM | #1 |
Drives: red Join Date: Jun 2016
Location: great falls montana
Posts: 86
|
Output shaft failure?
Just got my 2010 m6 SS earlier this summer it only has 19k miles on it. Today as I was driving I started to notice that my car was sputtering in first as I would take off and I could feel something knocking in the shifter as if every rotation it would do it. I just read that their was an output shaft problem in earlier models of 2010's. Really stumped on this one
|
09-16-2016, 10:47 PM | #2 |
|
If your output shaft fails I don't think you will be going anywhere. You may look to your clutch for the symptom.
__________________
There's more to life than gas mileage
LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, 100 cell Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears. |
09-17-2016, 09:47 AM | #3 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,283
|
If output shaft failed it breaks and the car does not move at all. You have a different problem.
__________________
|
09-17-2016, 05:50 PM | #4 |
Drives: 2010 2SS Camaro 6sp. Join Date: Jan 2012
Location: South Jersey
Posts: 639
|
Mine has 43,000 miles and no issues. Sounds like you could have a branch or somthing wrapped around the drive shaft.
__________________
Last edited by Ledzepx; 09-18-2016 at 11:48 AM. |
09-18-2016, 06:13 AM | #5 |
I.AM.
Drives: 2011 2SS/RS/A6 cammed-n-whippled Join Date: Oct 2008
Location: NY
Posts: 2,638
|
What's the last 5 digits of your vin #? The output shaft issue was fixed around #26,000. But, I agree, doesn't really sound like it's the problem here.
__________________
NY5thgen.com
|
|
|
Thread Tools | |
|
|