03-08-2012, 09:00 AM | #1 |
Drives: 2015 2ss/rs Commemorative edition Join Date: Oct 2011
Location: Winter Garden, Fl (Orlando)
Posts: 423
|
DIY - IPAD2 Dash Mount without center speaker
This will be a DIY for mounting an ipad2 to your dash with out drilling or any modifications. I found a way to secure the ipad with the help of some other threads on this site. I want to do the DIY right and i will be updating it and adding photos over the next 2 days. I will start with the finished look of the mount.
This Mount uses the following materials - 2 Large suction cups supporting 7 pounds each - 3m Velcro - gorilla super glue - razor - ipad2 shell case that supports smart cover - iphone vent mount I have been testing this mount for the last 2 days before i decided to post this DIY, The ipad hasn't moved and seems very sturdy over bumps and sharp turns and heat in the vehicle. Just wait for the full write up. Update- Start by cutting the suction cups hook off with the razor to make a flat surface apply gorilla glue to the suction cup and then apply one side of the 3m velcro let dry for up to 4 hours to get a secure bond Apply other side of Velcro to the ipad shell case take the iPhone vent holder apart leaving just the vent clips and the base attached take the 3m Velcro and apply it to the flat side of the vent holder put the vent holder and suction cups in place like shown in the photo. mark the shell case to match where the Velcro should go apply all Velcro to case and stick together to see if the mount holds. add ipad and enjoy
__________________
2015 2ss/rs Commemorative Edition - DynoSteve Tune, NPP, Hotchkis sport springs 19110, Zl1/1LE rear swaybar, VR-DRX CAI, VaraRam VRX-93, Z28 spoiler
Last edited by Strider044; 03-08-2012 at 09:23 AM. Reason: update |
03-09-2012, 12:37 AM | #2 |
Drives: bicycle Join Date: Nov 2011
Location: United States
Posts: 106
|
nice ... that looks good ... but im thinking about the velcro ... is it gonna be enough? but look good ... need video of the ipad while driving ... how about turn on the front camera and record while driving, you will know how steady it is
|
03-09-2012, 01:37 PM | #3 |
Drives: 2015 2ss/rs Commemorative edition Join Date: Oct 2011
Location: Winter Garden, Fl (Orlando)
Posts: 423
|
Tule,
I used the 3m Velcro. That sucker plus the gorilla glue really holds to the suction cups and the vent mount. Today is day 3 and its still on tight.Ill get a video up of it tomorrow. ill take a video tonight on my way over to Disney to shoot pool.
__________________
2015 2ss/rs Commemorative Edition - DynoSteve Tune, NPP, Hotchkis sport springs 19110, Zl1/1LE rear swaybar, VR-DRX CAI, VaraRam VRX-93, Z28 spoiler
|
03-09-2012, 06:04 PM | #4 |
Drives: 2012 Camaro 1LT manual Join Date: Aug 2011
Location: GA
Posts: 489
|
Will this also work for the first gen iPad and the "New iPad?"
|
03-10-2012, 12:31 AM | #5 |
Drives: 2011 Summit White 2LS Join Date: Jun 2011
Location: Los Angeles
Posts: 918
|
Very cool, did you do anything to hide the cable running to your center console for the USB connection?
|
03-10-2012, 08:55 AM | #6 |
Drives: 2015 2ss/rs Commemorative edition Join Date: Oct 2011
Location: Winter Garden, Fl (Orlando)
Posts: 423
|
Yes it will work with any iPad, just make sure to buy a shell that is clear so when you need to see the stereo you can just pop the iPad out of the case.
Im using my Bluetooth connection right now because I want to controls the music manually.
__________________
2015 2ss/rs Commemorative Edition - DynoSteve Tune, NPP, Hotchkis sport springs 19110, Zl1/1LE rear swaybar, VR-DRX CAI, VaraRam VRX-93, Z28 spoiler
|
03-13-2012, 03:43 PM | #7 |
Drives: 2015 2ss/rs Commemorative edition Join Date: Oct 2011
Location: Winter Garden, Fl (Orlando)
Posts: 423
|
at night with the ipad
__________________
2015 2ss/rs Commemorative Edition - DynoSteve Tune, NPP, Hotchkis sport springs 19110, Zl1/1LE rear swaybar, VR-DRX CAI, VaraRam VRX-93, Z28 spoiler
|
07-14-2012, 10:48 PM | #8 |
Drives: 2015 2ss/rs Commemorative edition Join Date: Oct 2011
Location: Winter Garden, Fl (Orlando)
Posts: 423
|
Update-
I have been using this mount for 4 months with no issues. The Velcro is fantastic and holds the iPad very steady at all times.
__________________
2015 2ss/rs Commemorative Edition - DynoSteve Tune, NPP, Hotchkis sport springs 19110, Zl1/1LE rear swaybar, VR-DRX CAI, VaraRam VRX-93, Z28 spoiler
|
07-24-2012, 12:54 PM | #9 |
603 Camaros
Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012
Location: Manchester, NH
Posts: 6,779
|
Awesome love how your in Orlando so that we know the heat and humidity aren't affecting it.
__________________
MY 2017 I4 CAMARO BUILD JOURNAL | YOUTUBE | INSTAGRAM | 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE | 12.693s @ 105MPH 1/4 Mile |
07-24-2012, 09:40 PM | #10 |
I like teeth.
Drives: #198 Join Date: Oct 2009
Location: Ft. Lauderdale, Florida
Posts: 4,817
|
good idea, just seems like you're asking to get robbed though
__________________
.
Please check out my youtube detailing channel: http://www.youtube.com/user/roshan517 "When you want to succeed as bad as you want to breathe, then you will be successful." |
07-25-2012, 12:49 AM | #11 |
Drives: 2015 2ss/rs Commemorative edition Join Date: Oct 2011
Location: Winter Garden, Fl (Orlando)
Posts: 423
|
That's where the velcro comes in, you take it with you. I use my iPad more then my laptop. Trust me everyone who see's the mount loves it. I have requests for mounts. I also built one for my work car whichs is a 2011 jetta, the mount is super solid.
__________________
2015 2ss/rs Commemorative Edition - DynoSteve Tune, NPP, Hotchkis sport springs 19110, Zl1/1LE rear swaybar, VR-DRX CAI, VaraRam VRX-93, Z28 spoiler
|
07-25-2012, 10:02 AM | #12 | |
I like teeth.
Drives: #198 Join Date: Oct 2009
Location: Ft. Lauderdale, Florida
Posts: 4,817
|
Quote:
But like I said, I love the idea, and if you take your iPad everytime you get out of your car, this mod is a great thing to do!
__________________
.
Please check out my youtube detailing channel: http://www.youtube.com/user/roshan517 "When you want to succeed as bad as you want to breathe, then you will be successful." |
|
01-10-2013, 09:50 AM | #13 |
Drives: 2015 2ss/rs Commemorative edition Join Date: Oct 2011
Location: Winter Garden, Fl (Orlando)
Posts: 423
|
Update - the GPS is sweet and the device is very stable.
__________________
2015 2ss/rs Commemorative Edition - DynoSteve Tune, NPP, Hotchkis sport springs 19110, Zl1/1LE rear swaybar, VR-DRX CAI, VaraRam VRX-93, Z28 spoiler
|
06-15-2013, 11:56 AM | #14 |
OMINOUS
Drives: '10 Camaro 2SS/RS M6 Join Date: Dec 2012
Location: Lincoln, Nebraska
Posts: 223
|
Looks good! You know for just the added peace of mind 3M also does a locking kind of velcro. It's called reclosable tape. It would secure better in my opinion but would make taking it off a little bit of a pain. Here's an example of what I'm talking about: http://www.misterart.com/adhesives/h...rabberProducts
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: How to Change the Door Speakers | RandyB | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 15 | 04-26-2014 10:53 PM |
MAGNAFLOW DUAL CENTER EXIT Cat-Back Exhaust & Unrestricted Motorsports Rear Diffuser! | AutoAgenda | V8 Bolt-Ons & Tunes | 21 | 05-01-2013 12:44 AM |
Clean dash from rubber bean bag GPS mount | starbase | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 3 | 09-07-2011 01:59 PM |
Center speaker mistake? | VRMMMM | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 22 | 01-25-2011 12:09 PM |
Center Dash Speaker on BA System | Buffnshine | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 10 | 03-03-2010 03:14 PM |