2014 Heat extractor on a 2010 hood - Page 59 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

salva · 02-16-2017, 02:07 AM

So what happens if you do this and don't add the rain tray? Will the water that gets inside mess up the engine or something?

xc_SS/RS · 02-16-2017, 10:17 AM

Quote:

Originally Posted by salva

So what happens if you do this and don't add the rain tray? Will the water that gets inside mess up the engine or something?

Engine will get wet is all. I'm sure something could get messed up by water getting in but I think it's highly unlikely. I'd put the tray on though, no need to have that kind of risk with a DD. Garage queen? Screw the tray lol

Angrybird 12 · 02-18-2017, 05:58 PM

Quote:

Originally Posted by Angrybird 12

Since I already have the ACS insert on my Camaro i was thinking I might want to try to install one of these on my 2007 Colorado hood. Do you think it would fit?
Here is my truck,

Got my extractor today, a quick look and I have a concern about underhood clearance on my truck. Exactly how much clearance do you need underneith?
Can someone measure from the hood to the lowest point of the extractor not including the drain pan?
Thanks.

salva · 02-21-2017, 01:21 AM

I'm trying to do this mod. Can anyone give me the length for A and B in inches? I want to match the same location of the scoop as in the SS camaro.

Thank you

KROLIS · 02-21-2017, 03:51 PM

This is the insert, NOT the hole.

Jerry7297 · 02-22-2017, 03:35 PM

Those are not the measurements I used but damn near any measurements will work as long as you center the extractor on you hood. Actually to put it back a little further than I did is better to me cause it keeps you from having to cut into the front support of the hood like I did. I was going off of the Stock locations for the 2014s.

I'm glad people are still doing this mod, its awesome.

KROLIS · 02-23-2017, 09:50 PM

Quote:

Originally Posted by Jerry7297

Those are not the measurements I used but damn near any measurements will work as long as you center the extractor on you hood. Actually to put it back a little further than I did is better to me cause it keeps you from having to cut into the front support of the hood like I did. I was going off of the Stock locations for the 2014s.

I'm glad people are still doing this mod, its awesome.

That was the measurement from using the template that came with extractor from ACS

krisprz2010camaross · 03-11-2017, 04:36 PM

Hey does anyone know if the water tray leaves enough space between the 1le strut bar or not?

Sent from my iPhone using Tapatalk

KROLIS · 03-11-2017, 08:15 PM

Don't have a 1LE but but my 13/RS vert has room.

krisprz2010camaross · 03-13-2017, 01:52 PM

Yeah I checked and I would have room if it wasn't for the vararam intake. So I'm gonna have to cut some of the water tray to fit it under the hood

Sent from my iPhone using Tapatalk

bowtiesonly · 03-25-2017, 04:44 PM

Did the install according to jerry7297 instructions, used the 16 3/8 from back of the cowl , really liked the way it turned out! Needed a few beers to start cutting lol Thanks for the write up!

Ryanbabz71 · 03-25-2017, 05:41 PM

After a year still liking mine

Ryan B.

Angrybird 12 · 03-26-2017, 04:16 PM

I bought one intending to put it on the hood of my Colorado, after getting it and doing some measurments i feel the clearance would be too close to the top of the motor.
So I am offering the extractor with mounting nuts and washers for $100 plus shipping. If you are within 100 miles of Johnson City Tn I would be willing to deliver it for just the $100.
Message me if you are interested.

acr3 · 03-26-2017, 06:04 PM

Are some of these inserts wider at the rear than the front? It looks that way in some of the pictures. Maybe aftermarket?

02-21-2017, 03:51 PM	#817
KROLIS Drives: 2017 2LT/RS & 2013 2LT/RS vert Join Date: May 2014 Location: Georgia Posts: 383 View My Garage	measurement This is the insert, NOT the hole. Attached Images

03-11-2017, 04:36 PM	#820
krisprz2010camaross Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014 Location: Yorba Linda, California Posts: 1,564	Hey does anyone know if the water tray leaves enough space between the 1le strut bar or not? Sent from my iPhone using Tapatalk __________________ YouTube:Krisprz garage Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez

03-13-2017, 01:52 PM	#822
krisprz2010camaross Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014 Location: Yorba Linda, California Posts: 1,564	Yeah I checked and I would have room if it wasn't for the vararam intake. So I'm gonna have to cut some of the water tray to fit it under the hood Sent from my iPhone using Tapatalk __________________ YouTube:Krisprz garage Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez

03-25-2017, 04:44 PM	#823
bowtiesonly Drives: 2012 Camaro 2ss Join Date: May 2012 Location: Arkansas Posts: 225 View My Garage	Did the install according to jerry7297 instructions, used the 16 3/8 from back of the cowl , really liked the way it turned out! Needed a few beers to start cutting lol Thanks for the write up! Attached Images __________________ 2012 2ss , long tube headers , summit x pipe ,borla mufflers, vararam intake, vmax ported throttle body rdp motorsports dynosteve tuned, BMR trailing arms and bushings elite engineering catch can. [Ifirst camaro ]2012 LT LFX, nytrex wet system ,GPI dyno tune, Injen longtube intake, Dynomax axle back exhaust, Vmax ported throttle body, elite engineering catch can.

03-25-2017, 05:41 PM	#824
Ryanbabz71 Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,231 View My Garage	After a year still liking mine Ryan B. __________________ Ryan * 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680

02-16-2017, 02:07 AM	#813
salva Drives: 2014 LS Join Date: Apr 2014 Location: United States Posts: 95	So what happens if you do this and don't add the rain tray? Will the water that gets inside mess up the engine or something?

02-21-2017, 01:21 AM	#816
salva Drives: 2014 LS Join Date: Apr 2014 Location: United States Posts: 95	I'm trying to do this mod. Can anyone give me the length for A and B in inches? I want to match the same location of the scoop as in the SS camaro. Thank you

02-22-2017, 03:35 PM	#818
Jerry7297 Drives: 2018 2SS/ 1LE Join Date: Sep 2012 Location: San Marcos TX Posts: 710 View My Garage	Those are not the measurements I used but damn near any measurements will work as long as you center the extractor on you hood. Actually to put it back a little further than I did is better to me cause it keeps you from having to cut into the front support of the hood like I did. I was going off of the Stock locations for the 2014s. I'm glad people are still doing this mod, its awesome.

03-11-2017, 08:15 PM	#821
KROLIS Drives: 2017 2LT/RS & 2013 2LT/RS vert Join Date: May 2014 Location: Georgia Posts: 383 View My Garage	Don't have a 1LE but but my 13/RS vert has room.

03-26-2017, 04:16 PM	#825
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	Anyone want to buy mine? I bought one intending to put it on the hood of my Colorado, after getting it and doing some measurments i feel the clearance would be too close to the top of the motor. So I am offering the extractor with mounting nuts and washers for $100 plus shipping. If you are within 100 miles of Johnson City Tn I would be willing to deliver it for just the $100. Message me if you are interested. __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word! Last edited by Angrybird 12; 04-15-2018 at 01:09 PM.

03-26-2017, 06:04 PM	#826
acr3 Drives: 2010 Camaro SS Join Date: Jun 2014 Location: Central Florida Posts: 103	Z-28 Hood insert Are some of these inserts wider at the rear than the front? It looks that way in some of the pictures. Maybe aftermarket?